Month: February 2025

Season’s greetings {Purple Onion Designs}

ElinLeave a comment

Hi, crafty friends! I’m sharing a sweet holiday card today, made with images from the Whispering Pines collection from Purple Onion Designs, illustrated beautifully by Stacey Yacula.

I started by stamping Murphy (squirrel), put a mask on top, then Frosty & Sweet Pea, put another mask on top, then the little deer from the Doe & Hart set, placed a third mask and stamped the Little Pines at the very back. I did all the stamping with Extreme Black in from My Favorite Things onto X-Press It blending card, which is what I pretty much always use for Copic coloring.

Once I removed the masks, I could color in my scene. I always start with the background elements before coloring in the focal point. I wanted a very wintery card, so I kept the trees pretty much white, only adding a little bit of the blues I used for the rest of the snow to make them look less flat.

I stamped a sentiment from the Classic Holiday Trio stamp set using Grapefruit ink from Concord & 9th, which  perfectly matches the peach tones in my coloring.

I cut my panel down to 4 1/2 x 5 3/8″, which gave me an even 1/16″ border around the edge when I adhered it to my A2 card base. I love a think border like this. I also love a very chunky border, usually when I mount my panels with foam tape. To me, it seems silly to add foam tape to a panel that goes close to the edge of the card, but with a wide border, it really makes an impact. I finished off the card by drawing in the Big Dipper stars using an extra fine point Sharpie paint marker.

Not a whole lot of markers used for this one, actually. Although I see that I missed the colors I used (BV29, 25, 23) for the sky in this graphic.

HUG – because you deserve it {Papiria}

Elin1 Comment

Hi, crafty friends. Today’s card is a floral one that I created for the Papiria blog. I make Christmas cards in the middle of summer and floral cards in the dead of winter, that’s just how I roll. It’s been really cold lately, and florals make me believe that spring is coming at some point. It is, right?

I started by stamping the large flower in the Pristine Peonies stamp set from Altenew using VersaMark ink. I added Gilded embossing powder from Brutus Monroe and melted the powder before die cutting the flower and then using the coordinating stencils to quickly color in the flower and leaves. I used Nectar, Grapefruit, Sorbet and Cayenne inks from Concord & 9th for the florals, and Pistachio, Misty Sage, Mossy Meadow and Green Opal Fresh dye inks from Altenew for the leaves and buds.

I die cut an additional three layers of the floral from white cardstock to glue behind my colored one, did partial die cutting on the card base using the same die and then ran the base through my Gemini Jr. with the Angled Mosaic embossing folder from Altenew to create some texture to the card front.

I adhered a panel of Grapefruit cardstock from Concord & 9th to the inside to accentuate the look of the open front, and added my stacked die cuts to the front of the card base. Even though the tips of the leaves touching the table when the card is on display are pointy, all the layers make for a very sturdy front, so they won’t bend.

I actually used a Christmas die for the sentiment. The die cuts out the word juleklem (Christmas hug), but by omitting the first four letters, I was left with klem (hug). I die cut two stacks of three layers each and die cut the shadow layer from Heavyweight Translucent vellum from My Favorite Things. I sandwiched the vellum between the two stacks and adhered my stacked die cut on top of the flower. I stamped and gold heat embossed a coordinating sentiment (translation: because you deserve it) onto a strip of Sorbet cardstock from Concord & 9th, adhered it to the vellum and added a few more layers on the back for strength and dimension, before finishing off the card with satin gold sequins from Altenew.

Happy birthday {Papiria}

ElinLeave a comment

Hi, crafty friends! Today is Mother’s Day in Norway, and I probably should have thought ahead enough to make a Mother’s Day card to share today, but I’m not always a good thinkaheader and have a birthday card to share instead. My design is pretty generic, though, and it would be easy to swap out “birthday” for “Mother’s Day”. I even think the color scheme is perfect for mother’s day.

So many things went wrong in the creation of this card, but I fixed/covered up most of my mistakes and I’m pretty happy with the end result. I started by stamping birthday from the All the birthdays stamp set from Concord & 9th onto an A6 panel of Stamper’s Select White cardstock from Papertrey Ink, as well as onto a piece of Nectar cardstock from Concord & 9th that was large enough to cover the shaker area. I didn’t want to stamp it directly onto the card base, that would have made it harder to line up. More on that later. So far, so good, right? I then die cut the HAPPY from the Happy Birthday words dies from Kristina Werner into my white panel, and kept the counters of the A and the Ps to put back in later. Things were still going according to plan. There’s a small asterisk looking stamp in the All the birthdays stamp set. I wanted to stamp that randomly across my white panel and pulled out an acrylic block. We used to stamp with acrylic blocks all the time before the Misti was invented. I’m not a ding dong, surely, I’m capable of stamping this tiny stamp a few times with an acrylic block without messing up, right? Turns out I AM a ding dong and royally messed up on the Eucalyptus colored asterisk above the A and P. Pretty much in the middle of the card, isn’t that typical? I knew I was going to add sequins, and I could strategically place one to cover up my boo boo. I cut off 3/16″ on all sides to allow the card base color to work as a frame once the card was complete.

I then adhered a piece of acetate behind my letters, glued the counters (interior pieces of the letters) back in onto the acetate, flipped the panel over and added tons of foam tape around the shaker window pretty close to the window, even putting tiny strips behind the counters of the Ps, before putting a few sequins from Altenew into the shaker well before sealing it shut with another piece of acetate. I made sure to add the sequins the right side up. That was not a good idea, but I didn’t realize at the time and adhered my shaker piece onto the stamped piece of Nectar cardstock to line up the stamping on the two pieces. The problem with the sequins all facing the same way is that once they shook around, they clumped together like stacks and were pretty much impossible to separate by flicking the card. The other mistake? Adding the foam tape so close to the letters and behind the counters, my sequins didn’t really have a chance to move much. I had adhered everything to the card base at this point.

I’m not shy with glue when adhering things, but I was able to slide a thin 6″ steel ruler under my shaker panel and basically used it as a saw to cut it away from the card base, cutting horizontally so I would preserve the card base as well as I could. I didn’t have another sheet of Nectar cardstock to create a new A6 card base, so this was the way to fix it. I then pulled off the nectar piece with the stamping, then the back acetate piece, which took with it a few of the small pieces of foam tape that were in the way anyway, and then I emptied out the sequins, made sure there were no sticky pieces left behind, put sequins back into the now rectangular shaker window, this time randomly with some upside down and some right side up – and I added way more sequins too, before sealing it shut with a new piece of acetate. The piece of Nectar cardstock I’d stamped on initially had crease lines after being pulled off, so I had to restamp birthday on a new piece of Nectar. Evidently, I didn’t put the stamp into the Misti the same way as I had the first time, because the new stamping wouldn’t really line up with the old stamping – part of the nature of photopolymer stamps, they’re soft and can be curved. The loops on the b and h don’t perfectly line up with the stamping on the white panel the way they initially did, but this is me embracing imperfection, I wasn’t redoing the white panel too.

I adhered my shaker panel to the card base and cut a couple of additional white panels to put on the inside of the card. This means I have a white panel to write my personal message, the card is a little sturdier because it’s now thicker, and the piece I adhered on the back of the front covers up the fact that I could actually see through parts of the card base after my little sawing earlier. Not shy about glue, remember? Yeah, the glue does its job, and I tore parts of it down to almost printer paper thickness. I added sequins to the front of the card (one covering up my stamping mishap) and I was done. At least I thought so… I was happy with the card, but then noticed as I was writing up the blog post for Papiria that the counter of the second P had slipped a little and wasn’t in the right spot anymore. It was bugging me. It was *really* bugging me, so I peeled it off, die cut a new one that I adhered in the right spot and took a couple of new photos. You can still see the droopy counter in the first two photos here, but that’s my card. I got there in the end.

Baby, it’s cold outside {Purple Onion Designs}

ElinLeave a comment

Hi, crafty friends! It’s never to early for holiday cards, right? Although, I did technically create this back in the first half of December. Things just got so hectic before Christmas I never found the time to share. That time is now, apparently! 🙂

These images in this scene are all from the Winterwood collection from Purple Onion Designs, illustrated by Holly Mabutas. We have Frosty, Finn (with his tophat), Blossom the bunny and Will, who’s giggling next to Frosty. I stamped the Winter Neighborhood in fadeout ink for a no line effect in the background. Except for the holly on the tophat, there’s really nothing that screams holiday on this card, so it could easily work throughout the winter season and in my neck of the woods through the majority of spring, too, actually. Most of the snow is usually gone by mid May.

I colored the scene with Copics, then stamped the critters and the snowman again, this time using Obsidian ink from Altenew to get crisp black lines. This is a pigment ink, which doesn’t play nice with Copics, but as long as the coloring’s already complete, using this ink is totally fine. I sprinkled on Chunky White embossing enamel from Stampendous, melted the granules from the back of the paper and finished off the card with a sentiment from the Holiday Blurbs I stamp set that I stamped in Jalapeño Popper ink from My Favorite Things. I added some foam tape on the back of the speech bubble for a tiny bit of dimension on the card. This is an A6 size card, measuring 6 1/4 x 4 5/8″.

Not a whole lot of colors used given the large scene, but I did use 7 for the fox alone. But he came out so cute, it was totally worth it!

Hugs – you are loved {Lili of the Valley}

ElinLeave a comment

Hi, crafty friends! I’m back today with a sweet card featuring an adorable monkey from Lili of the Valley. He’s from the Little Monkey stamp set, which is available both as a clear stamp set (here) and as a digital set (here). It’s always great when you can choose.

I haven’t done any coloring since December, so I felt rusty. Thankfully, these images from Lili of the Valley are easy ones for jumping back in! Once my coloring was complete, I fussy cut him, leaving a thin white border around the edge. I didn’t want to cut away the “fuzzies” that are so typical of LOTV images, so by leaving a white border, I could preserve the look. I used an embossing folder (Quilted embossing folder from Concord & 9th) to create some interest in the background without being too distracting.

I cut down a few colors of cardstock from Concord & 9th to 3/16″ wide strips and glued them together on a scrap piece of white cardstock. The colors I used are Oceanside, Aqua Sky, Buttercup, Grapefruit and Honeysuckle. I mounted my stripped up panel at an angle, put a few foam squares behind the monkey and added him on top. I die cut hugs (Quilted die set from C9) three times from white cardstock, stacked them and adhered them on top of my strips next to the monkey. I then stamped and white heat embossed a sentiment from the Itty Bitty Gifting stamp set from My Favorite Things onto a black piece of cardstock from Concord & 9th. I added a couple of layers of black cardstock behind for strength and dimension and adhered it on top of the die cut word, before finishing off with a few sequins from the Starry Night mix from Little Things from Lucy’s Cards.

Simple color combo this time.