Hi, crafty friends. I’m sharing with you a super simple birthday card today, featuring this dragon eating ice cream from Lili of the Valley. This was the card we gave my nephew for his birthday this week. The first birthday card I ever made was for him for his first birthday. It featured a green dragon which I actually drew myself and colored in using Pantone markers. This week he turned 14, and even though this dragon is a bit childlike, it still feels like a nod back to that first one. Plus, he’s eating ice cream, you can’t go wrong with ice cream, and my nephew loves ice cream, so it was kind of perfect.
I printed the dragon on a piece of X-Press It blending card and colored him with my Copics, before using the largest die in the A2 Stitched Rectangles STAX 1 die set from My Favorite Things. I covered my card base with a 4 1/4 x 5 1/2″ piece of patterned paper from Kaisercraft (Charmed from the Key to my Heart collection) to match the green. I cut the panel with the dragon at funky angles at the top and left side to create a convex quadrilateral that I mounted on foam tape in the top left corner of the card.
Using a scrap of patterned paper from the Fremtidsdrømmer collection from Papirdesign, I die cut Gratulerer using the Gratulerer med dagen 3 die set, also from Papirdesign. I die cut an additional 3 layers of white cardstock to glue behind it, but decided that even that wasn’t enough dimension, so I cut tiny slivers of clear foam tape from Rabbit Hole Designs to add to the back of the letters. That did the trick, and it looks like the die cut is floating. I stamped a sub sentiment from the A06 stamp set from Norsk Stempelblad AS onto another piece of the same patterned paper using Jalapeño Popper ink from My Favorite Things, cut it down to a strip, added a couple of white cardstock strips behind it and more of the clear foam tape to make it float, before finishing off the card with a few enamel dots from the Pocketful of Sunshine pack from Altenew.
Fairly simple color palette, but I went through too many teal colors before I decided on the right one for the straws and the sprinkles.
The stamp actually comes with all the candles in a row, but for this design I wanted to shake things up a bit. I colored my candles in a bit of a rainbow order and used a lot of candles (I printed the whole row of candles three times). After they were all colored came the fun part: fussy cutting.
I don’t normally mind fussy cutting, I find it relaxing, but these candles are tiny and there are plenty of them, so it took a while. Well worth it, though. I prefer cutting right against the black lines of the image when I fussy cut, and that’s what I did here, for everything but the wick of the candle, which has a bit of white showing on either side.
Using clear foam tape, I mounted each of the candles onto a panel I created from Soft Stone cardstock from Papertrey Ink. I then mounted that panel onto my card base, which I created from Stamper’s Select White cardstock, also from PTI. I love the cardstock from Papertrey Ink, it’s my favorite!
Using the Happy Birthday die from My Favorite Things, I die cut the words three times from True Black cardstock from Papertrey Ink and the shadow twice from 40 lb vellum from Bazzill. I stacked the black cardstock and covered my layered die cut with VersaMark ink, then sprinkling on Super fine detail black embossing powder from Ranger and heat set. I don’t usually use black embossing powder, it tends to create a mess, but to create shiny die cuts like this, it works great. I repeated the embossing process a couple more times to make it extra shiny and glossy and even.
Before die cutting the vellum, I put a piece of adhesive sheet on the back of one, so I’d be able to glue them together without any adhesive showing. The trick with adhesive and vellum is to have an even layer on the back, whether it’s liquid glue or another type of adhesive. Of course you can add your adhesive in strategic places behind the vellum or put embellishments on top, but I didn’t want to have to think about that for this card, and doubling up the vellum makes it a little less transparent and it stands out more against the colorful candles behind it. I actually didn’t put any embellishments on this, I thought there was enough going on with all the candles and dimension already there.
Lots of colors for this. Three colors in most of the combos, some use four. Yes, I go overboard, I’m aware 😉
This image is sooo sweet, I just had to create a card using it. There’s also a butterfly in the image, which I erased before printing, I just wanted the bunny with the kite for this card. I created a very simple grassy hill below her feet and used the Rolling Clouds stencil from My Favorite Things along with Eastern Sky ink from Altenew to create the clouds behind her.
From Stamper’s Select White cardstock from Papertrey Ink, I die cut three white frames using a die from the Madison Avenue die set from Mama Elephant and stacked them for a dimensional look. I adhered my colored piece to the back of the frame, before adhering everything to a card base I created from Poppin’ Pink cardstock from My Favorite Things. I white heat embossed a sentiment from the Mini Messages stamp set from Mama Elephant onto a separate piece of pink cardstock and used a 1″ circle punch from EK Success to create a quick circle from it. I popped it up on clear foam tape near the top right of the card, and decided not to add any embellishments to this.
Not a lot of colors for this one, though I probably went overboard with the yellows.
I actually created two cards this time. No Copic coloring on these, which is rare for me. I bought the Wreaths and Mulled Wine stamp set from Ciao Bella last year, but didn’t have time to use it. Get Cracking to the rescue. I took one of the wreaths in the stamp set, stamped it in VersaMark ink onto watercolor paper (I used Fabriano Artistico Extra White 140 lb hot pressed paper for this) and created two similar, yet different cards.
For this blue one I used Iridescent Sparkle embossing powder from JudiKins for my heat embossing. I used Prussian Blue paint from my Mijello Mission Gold watercolor set and watered it down quite a bit to get the light blue I was after. I used a 3/4″ flat brush across the surface, and the heat embossing resisted the watercolor I put on top. I love the edges of watercolor, so I just walked away and let this air dry, I didn’t want to mess with it.
Using a more concentrated paint of the the same color, I did a flat wash on a scrap piece of watercolor paper that was big enough for me to die cut. I used the Merry Script die from Mama Elephant and die cut three layers of white and one layer from my painted blue piece and stacked them for dimension. I also white heat embossed part of a sentiment from the Itty Bitty Holiday stamp set from My Favorite Things and nestled that in below the merry using some clear foam tape.
I could fiddle with placement of embellishments all day long. Color, size, I wanted everything to be just right, and wound up using a combination of the Igloo mix from Little Things from Lucy’s Cards (pearls and iridescent sparkle sequins), the Crystal Collection – Glass mix, also from Little Things from Lucy’s Cards (clear jewels), and a few blue diamonds from Kort & Godt to fill in the rest.
I used a die from Waffle Flower to create a rectangle from the watercolored piece and mounted in on foam tape on a card base I created from Spring Rain cardstock from Papertrey Ink. It’s no secret that I love blue for Christmas cards, and I thought this soft background with the wreath and the embellishments was a nice combo.
For my second card I used the same wreath stamp that I stamped in VersaMark ink. This time I embossed it in silver, painted the background with Van Dyke Green (also watered down quite a bit) and flipped the panel upside down to have the snowflake in the bottom right “corner” of the wreath instead of the top left.
I used the same Waffle Flower die to create my rectangle from the watercolor piece and was a little unsure of what to do for a card base. I didn’t have any green cardstocks that matched my watercoloring, and I didn’t feel like pulling my paints back out to create a green wash that I could use (although that would have been pretty). I rummaged through my silver cardstocks, but none of them matched the silver heat embossing very well, so I wound up creating my own using the same silver embossing powder that I used for the wreath. I squished my VersaMark pad onto the edges of a 4 1/4 x 5 1/2″ piece of white cardstock, sprinkled on the embossing powder and repeated the process until the embossing was even and covered everything. I adhered my embossed panel onto a white top fold card base and mounted my watercolor cardstock on top using foam tape.
Using the Hjerte 3 die set from Papirdesign, I die cut the words God jul three times and stacked them for a dimensional look. I made sure to cut the top layer from the watercolor paper I’d already used so that the whites would match. I adhered my die cut words to the center of the wreath using liquid glue.
To finish off the card I added Kort & Godt diamonds in three different sizes in clusters around the wreath. They act as little berries and add a little bit of sparkle and shine.
I made quite a few green Christmas cards last year. It’s a color that’s growing on me, and this Van Dyke Green from Mijello is the most perfect green ever.
I had so much fun creating these cards. They’re very different from what I usually create, that might be part of the reason why. The simplicity of this design makes it easy to mass produce, too, if that’s your jam. Break out your embossing powders, different colors of paint and go to town.
Isn’t this image the cutest? The koala with the bunny ears painting the egg with the little bunny watching, it’s sooo sweet. I colored this image using a lot more colors than I normally would, but they’re colors that scream spring to me, so I’m all for it, I definitely long for warmer days.
I put a strip of pink patterned paper from My Favorite Things above and below the image, and added a few more patterned paper pieces (from Lawn Fawn and My Favorite Things) angled behind my colored piece, before die cutting all of them using the A2 Stitched Rectangles STAX 1 die set from My Favorite Things to create that faux stitch look that I love to add to my cards. I used the same die to die cut from yellow patterned paper from Lawn Fawn, adhered that to my card base, then mounted my colored piece on top using foam tape.
Onto a piece of vellum, I stamped a sentiment from an Easter stamp set from Papirdesign (PD18390 Påske) using VersaFine Onyx Black ink and clear heat embossed it, before die cutting it using one of the dies in the Fishtail Flag Frames die set from My Favorite Things.
I tied a bow around my sentiment banner using twine from Whisker Graphics in the color Lemon, and then I finished off the card with a few yellow enamel dots from the Pocketful of Sunshine enamel dot collection from Altenew.
Lots of colors for this one.
I went for a green and yellow combo this time, and made her hair dark (I colored her blonde last time). I was going to color her dress in teals, but when I was done with everything else and only had the dress left to color I changed my mind and opted for white. White’s not really white, I used a few grays and the tiniest amount of light blue, but it reads white in the finished coloring. I fussy cut my image leaving a white trim around the edge and put her aside while I worked on the rest of my card.
I took a page out of 
I adhered my cream panel onto a top fold, white card base using foam tape, before stamping and heat embossing a sentiment from the Itty Bitty Birthday stamp set from My Favorite Things. I thought this particular sentiment would work for many occasions, not just birthdays, and the size was perfect to add to one of my cardstock strips.
Using even more foam tape I adhered Mona near the bottom left of the card. I love that her dress sticks out right below the sentiment, I really couldn’t have placed the sentiment any better, it’s nestled in perfectly. I put Glossy Accents on the lollipop and a few Sparkling Clear sequins from Pretty Pink Posh here and there to finish the card.
Here you can see all the dimension. The cream panel is mounted on foam tape, the cardstock stripes are mounted on foam tape, and Mona is mounted on foam tape.
Quick and easy color palette for this one. I don’t think I went too much overboard with the amount of markers in this one. I won’t mention that I used six colors for her hair 😉
I stamped the image using Extreme Black ink from My Favorite Things, before coloring with my Copics. I love love love the way rubber stamps stamp even the thinnest lines. It’s great for details, and Stacey Yacula’s illustration style gets to shine. Her line work is very delicate, which pairs so well with rubber stamping, because you’re able to easily stamp all the little details.
I used a die in the Slim Card Basics die set from Mama Elephant to create a cloud border above my stamped and colored image, and used the same die on a separate piece of cardstock. I found a scrap piece of patterned paper from Scenic Route that I added to my card base, then added my cloud pieces on top using foam tape.
I used two sentiments from the 
Using the lower case Parker alphabet die set from Memory Box, I die cut each letter three times from Harvest Gold cardstock from Papertrey Ink to spell the word hello. I stacked my die cuts and adhered them to the right of Junie using liquid glue.
To finish the card I added a few yellow sequins from Little Things from Lucy’s Cards. These are actually from the Candy Corn mix; a Halloween mix with orange, yellow and clear sequins and gems which even has a few tiny ghosts made from acetate thrown in. It’s a fun mix.
Simple color palette for this one.
I wanted a little bit of subtle interest to my background, and used the Garden Lattice dies from Honey Bee and die cut both the base and the top die (these are sold separately) twice from Stamper’s Select White cardstock from Papertrey Ink. By doubling up on each of the die cuts, I get lots of dimension.
I also die cut the word hugs from the Sending Big Hugs die from My Favorite Things. I die cut two layers from white cardstock and three layers from purple (Winter Wisteria from Papertrey Ink). The purple didn’t match my coloring, so I added BV02 to the top layer, that did the trick. I stamped my sub sentiment from the Bitty Thanks & Gratitude stamp set from My Favorite Things using Grapesicle ink, also from My Favorite Things, and adhered the strip directly to the diecut HUGS word.
I finished off the card by adding a few veneer butterflies, I thought they paired well with the butterfly on the bunny’s nose. The butterflies are from Wycinanka, and I added two Kort & Godt pearls to the center of each of the butterflies to form the body, and that finishes the card.
Simple, yet happy color palette for this card.
I couldn’t choose any other colors for this card, it simply had to be blue and yellow. I colored the image with Copics, then used the largest die in the Wonky Stitched Rectangles STAX set from My Favorite Things to create a little bit of interest to the edges of the panel, before adhering it to a card base created from Cornflower cardstock from My Favorite Things.
In the top right corner, I adhered part of a mini doily from Doodlebug using liquid glue. To the top of the card, I tied a piece of Divine Twine from Whisker Graphics in the color Lemon. I stamped and white heat embossed a sentiment from the Mini Messages stamp set from Mama Elephant on a scrap piece of blue cardstock and die cut it into a tag using a die from the Everyday Gift Box die set from My Favorite Things. I tied the ends of the twine to the tag, added a bow and put foam tape behind the tag for a little bit of dimension to my card.
I put a small piece of Stick-it adhesive behind a scrap of Bright Buttercup cardstock from Papertrey Ink and die cut lots of tiny hearts from it using a die from the Say What? Gift Tags die set from Lawn Fawn. I adhered the hearts in three little groupings of three. They form a nice visual triangle and add more yellow goodness to the card. There’s no such thing as too many hearts!
I’m sending lots of love to the people in Ukraine. It’s heartbreaking that certain people haven’t yet learned the lesson that war’s never the answer. Love always is. 💙💛
Lots of Copics used for this. Thankfully, they were already out on my desk from previous projects, so I didn’t add to the pile of markers I have to clean before I put them back where they belong in my block stands.
I colored my image with Copics and put it aside while I worked on the rest of the card, which I kept fairly simple. I used the largest die in the A2 Stitched Rectangles STAX 1 set from My Favorite Things in combination with the Watercolor Wash Free Form die, also from MFT, to die cut a window from Bright Buttercup cardstock from Papertrey Ink. I adhered the image to the back of this window and adhered it to my card base, which I made from Stamper’s Select White cardstock from Papertrey Ink.
I die cut the Celebrate die from My Favorite Things twice from white cardstock and once from a silver sparkle cardstock and adhered them together for dimension. I also stamped a sub sentiment from the Itty Bitty Birthday stamp set from My Favorite Things onto Hibiscus Burst cardstock from Papertrey Ink and heat embossed it, before using a banner die from the Everyday Gift Box die set from My Favorite Things. I put a couple of additional layers of pink cardstock behind it, adhered it on top of the stacked Celebrate die cut and embellished the card very simply by putting two star enamel dots in spots that have stars in the stamp. Simple, right?
Quick and easy coloring with a fun, summery color palette (it’s been snowing and sleeting and freezing here, which makes me long for summer even more than usual).
Papirmølla 