Hi, crafty friends. I’m back with another card with an adorable image from the recent Lili of the Valley release. This time I’ve used the penguin in the Christmas Mugs stamp set. There’s also a Santa, snowman and reindeer in the stamp set, but I couldn’t not choose the penguin.
I colored my penguin mug with Copics and fussy cut the image right up against the black stamped lines. This image doesn’t have a whole lot of the whispy, perpendicular lines that are so characteristic of Lili of the Valley images, which was the reason I opted not to include a white trim around the edges. There are 3 or 4 lines at the top of his head that I had to cut off, but I was okay with that. I stamped some snowflakes onto a card base using Spring Rain ink from Papertrey Ink. The snowflakes are from an old Tim Holtz stamp set. I mounted the mug on foam tape near the bottom right of the card.
I die cut a few snowflakes using a couple of die sets from Memory Box. The one at the top, that is partially hidden behind the penguin and speech bubble is from the Stitched Let It Snow Circle Frame die set. The die set comes with a stitched snowflake circle frame and three individual snowflake dies. The snowflakes with the stitching detail are from the Twilight Snowflakes die set. I added some blue diamonds from Kort & Godt to the mug, as well as a heart from the Festivities mix from Little Things from Lucy’s Cards. I stamped a couple of sentiments from the Holiday messages stamp set from Mama Elephant using Lazy Days ink from My Favorite Things and die cut them into speech bubbles using the Say Anything die set from My Favorite Things. I stacked a couple of additional white die cuts behind the speech bubbles for dimension.
Simple color palette for this one, and I realize now that I forgot to jot down the blue Copics I used for this, but I believe they are B93, B91 and B90, which is a color I’ve made myself.
This week is Designer Week at Lili of the Valley! This means you can save 20% on any item on www.liliofthevalley.co.uk by using the coupon code ELINVENGE20 – so Happy Shopping! The offer lasts from October 10th until October 17th. I hope you are inspired by all my LOTV makes!
I did a lot of masking for this card, using two stamp sets from the recent release. I’ve got the 
I colored them all with Copics, added black glaze to their eyes for shine, then a dot of white Gelly Roll 05 once the black was dry. I fussy cut my “tree”, added foam tape to the back and mounted it on a card base I created from Blue Breeze cardstock from My Favorite Things.
I used the Stitched Snowflake Backdrop die from Lawn Fawn to create some texture on the card base. This card measures 5 x 7 1/4″, so I had to get creative with the die, because it’s a standard A2 size die. I love the subtle texture in the background.
I used a die from Kort & Godt to create my sentiment (Christmas hug in Norwegian). I stacked four die cuts from white cardstock and adhered the top of the word to the bottom of my critter tree. I used Starry Sky ombré glitter drops from Pinkfresh Studio to finish off. I love the sparkle and shine to these.
I mounted the snowman on foam tape for dimension, he fits perfectly next to the sentiment. To finish the card I added a few sequins from the Starry Night mix from Little Things from Lucy’s Cards.
Even though the background is adhered directly to the card base, I love all the dimension in the other elements. And here’s a little secret: I actually like the pops of red. Just don’t tell anyone 😉
For this card I paired 
This is why! This image, taken from a TV advent calendar, is of the fictional character Skomaker Jens Petrus Andersen. He was the protagonist in this advent calendar and he lived (and had his shoe repair business) in this green house. If you’ve grown up in Norway after the ’70s (but before 2010), you undoubtedly know this character and this very green house. I get nostalgic just looking at the photo.
Back to the card. Once my coloring was done, I added my panel to a card base I created from Cornflower cardstock from My Favorite Things. I used the Stitched Happy Birthday rectangle die from Memory Box to die cut the word happy. The die cuts a rectangle with the words happy birthday inside, but I wanted the word happy for my card and cut it away from the rest. I stacked a few for strength and dimension and adhered it to the roof of the train station, adding a white heat embossed sub sentiment from the 
Lots of Copics for this one.
I colored up the reindeer with my Copics and fussy cut him leaving a white trim around the edges. I added Glossy Accents to his nose for shine and put him aside while I worked on the rest of my card.
I used the Snowflake Confetti Fancy die from Hero Arts to make an impression into a white piece of cardstock. By dry embossing with the die, I add a bit of interest to the background without it being distracting.
I used partial die cutting with the Stitched Rectangle Scallop Edge Frames die set from My Favorite Things to create my scalloped borders on either side of the dry embossed white cardstock. I used patterned paper from Maja Design for this. The design is called Ornaments and comes from the Happy Christmas collection from 2021. I don’t use a lot of patterned paper on my cards, but I really like this green pattern with some sprigs, leaves and hearts in a darker green, along with some white dots scattered around like snow. The patterned paper from Maja Design has always been my favorite. It’s double sided and very thick. It’s so thick you can even use it for a card base.
I used the Snowflakes and Ornament die set from Hero Arts to create the ornament for my reindeer to sit in. I die cut the ornament die itself from the same patterned paper that I used for my scalloped borders. I then temporarily taped the two dies in the set together, so I could create an ornament with snowflakes. I cut a few from white cardstock and one from silver glitter cardstock from Kort & Godt, stacking them for dimension. I tied a bow to the top of the ornament using May Arts natural twine and added a few pearls from the Glossy Porcelain mix from Little Things from Lucy’s Cards on top of the knot for additional shine.
I added Rudolph with his shiny nose to the center of my ornament. I also stamped a sentiment from the Itty Bitty Holiday stamp set from My Favorite Things using Shadow Creek ink from Altenew onto a scrap piece of the patterned paper I’ve used throughout. I added a few strips of white cardstock behind it for dimension and adhered it below the ornament, centered on my white, dry embossed piece.
This card wound up very simple looking, but it’s still kind of technique heavy. Partial die cutting, dry embossing with a die and layered die cuts. All the layers make it a very thick card, and it’s not the most mail friendly card I’ve ever made – I love dimension!
For an image this simple, I sure used a lot of colors!!
The koala sitting on the pile of presents comes with a matching sweet sentiment (pun intended), but I chose not to use the sentiment for this card and decided to erase it from the image in Photoshop before printing.
I went with a fairly traditional (at least to me) color combo. Light blue is one of very few colors I feel works well with red, and I even colored the stars blue to avoid adding more colors to this than necessary in order to keep the design clean. I die cut my panel using the largest die in the Watercolor Rectangle STAX die set from My Favorite Things, added foam tape to the back and adhered it to a top fold card base I created from Periwinkle cardstock from Hero Arts.
Onto a scrap piece of Periwinkle cardstock, I stamped and white heat embossed a sentiment from the Christmas Wishes stamp set from My Favorite Things, before using the coordinating die to cut it out. I added two more die cuts behind it for dimension and adhered it to my card, before finishing off with sequins and star confetti from the Starry Night mix from Little Things from Lucy’s Cards.
The popped up panel, and the dimension to the sentiment add a little bit of extra interest to an otherwise fairly clean and simple card. I wanted the image to shine, which is why I kept the sentiment a fairly light color.
I feel like I restrained myself when coloring. I only used four colors for the red, as opposed to my usual six. I kind of went overboard with the green, though. Those holly leaves really didn’t need three colors, they’re tiny.
This card features a snowman from the Snowfolk stamp set. It’s no secret that I love snowmen, and I colored this guy with my Copics before fussy cutting him, leaving a white border around him to keep the little perpendicular lines that are instantly recognizable as a Lili of the Valley signature.
Onto a top fold white card base, I stamped a snow flurry stamp repeatedly using Spring Rain ink from Papertrey Ink. The snow stamp is from the Flurry of Love stamp set from My Favorite Things. I then created a notch on each side of the card front using a small circle die.
I stamped a sentiment from the Scripty Xmas stamp set from Mama Elephant on top of my blue snowflakes using Autumn Rose ink from Papertrey Ink, wrapped Aqua divine twine from Whisker Graphics around the card and tied it in a bow on the front. The half circle notches help to anchor it, so it won’t slide down the front.
I mounted my snowman on foam tape and adhered him to my card. He fits perfectly on the right hand side, and the outline nestles in so well with the stamped sentiment. The foam tape also helps hold down the twine.
To finish the card I added a few blue pearls from the Ocean Breeze mix from Little Things from Lucy’s Cards. They add a little shine and also create another blue element to tie everything together.
As always, I’ve used lots of colors for the snow, I just can’t help myself.
Die 302 Julestjerne creates an awesome poinsettia. I’m not usually one to use flowers on anything holiday related, but this die set has won me over. There’s three dies in the set – one creates a leaf (which I didn’t use on this tag), and then there are two dies that creates two sizes of petals for the actual flower. If you cut both twice you get a nice looking poinsettia. I cut both four times for this very full poinsettia. I used patterned paper from Craft Consortium, and there’s instant variety to the petals, I love it. The dies create indentations for the veiny lines, which I quickly enhanced with a Zig clean color real brush marker in a color that matched (230 Pale Rose).
I added the flower to a tag I created from cream cardstock. I used Die 211 to create the tag, and stamped a sentiment from M-466 using Scarlet Jewel ink from Papertrey Ink. I adhered snowflakes from ST105 and ST102, before adding a white gem from ST208 to the center of each. I tied string through the loop at the top of the tag and added a KN567 button to the center of the flower, tying a bow behind the button using the same string that I used for the top of the tag (TR-104).
I colored my reindeer with Copics and fussy cut him leaving a thin white border. I added Glossy Accents to the string of lights and his nose for shine, and used a black Glaze pen and a white Gelly Roll 05 for his eyes.
I stamped and white heat embossed the Christmas Background stamp from My Favorite Things on a piece of white cardstock, before using Hunter Green, Forest Glades and Frayed Leaf inks from Altenew, as well as Squeezed Lemonade Distress ink, to ink blend on top. I ten used a die in the Stitched Mini Slimline STAX die set from My Favorite Things to turn it into a nice panel that would fit my card. I used the Country Landscape die from Memory Box to die cut the landscape in the background, and used the same stitching die on the hilly die cuts for a continuous stitching border across the card. I die cut the windows from Buttercup cardstock from Concord & 9th and the doors from white cardstock from Papertrey Ink that I ink blended with the same colors I used for the ink blending in the background.
I used the Snow Globe Accessories die set from My Favorite Things to die cut the string of lights from a dark gray cardstock and the individual bulbs from Buttercup cardstock once again. I added Glossy Accents on top of the bulbs for extra shine and dimension.
I die cut the word merry from the Merry Christmas die set from My Favorite Things five times from white cardstock, and once from Gold shine cardstock from My Favorite Things. I stacked them, adding the gold on top, and adhered my chunky die cut to the card. I stamped and white heat embossed a sentiment from the 
I tried using a somewhat limited color palette for this.
I knew I wanted lots of green on this card, and as soon I was done coloring skin, hair and the ground, I grabbed a few green combos and colored in all the elves. I hit a bit of a snag when I got to Mrs. Claus’ dress, because I felt like there were no good color options. Grey would have been boring, brown would have been sad, red wouldn’t work with the amount of green I had and I felt a little lost, to be honest. Color buddy Liz to the rescue. She suggested the RV90s, and they worked beautifully. I’ve combined RV90s with green plenty of times in the past, but usually for florals, and I have to admit it’s been a while, so it was fun to use an old classic again.
Once the coloring was complete, I used the largest die in the A2 Double Stitched Rectangle STAX die set from My Favorite Things to create a nice detailed edge around my panel and adhered it to a top fold card base I created from Autumn Rose cardstock from Papertrey Ink. I used most of a mini doily from Doodlebug in the top right corner of the card for a little bit of soft texture, and added a small scrap of the same doily in the lower left corner for a little bit of balance. I used a tag die from the Everyday Gift Box die set from My Favorite Things to create my tag, and stamped and white heat embossed a sentiment from the Mini messages stamp set from Mama Elephant in the center of it. I tied some Green Apple Divine twine into a bow and mounted the tag using a couple of foam squares before finishing off the card with a few gems from Crafty Meraki. These are the Green Illusion Sparkle and they change color when you tilt them in the light. They appear green and somehow shift to a pink/purple tone, they’re really cool, and the colors worked perfectly for this card.
Lots of green for this one. I used four different green combos to color in the elves so they wouldn’t all look the same. I also used RV97, a color I’ve created myself, for the dress on Mrs. Claus.
Papirmølla 