Hi, crafty friends. Earlier this week, the new Christmas collection from Lili of the Valley was launched on Create and Craft TV in the UK. Six stamp sets were released and my cards were shown on TV, that’s so freaky. You can watch the replay here – and I would because it was a fun show. And a funny show, the hostess couldn’t even finish her sentences because the products sold out so quickly.
This card features the same stamp from the Snow Cute stamp set that I used on the previous card I made with stamps from this release (it’s this one). For today’s card, I isolated the penguin in the stamp, fussy cut him and put him in a polaroid frame.
I created my card base from Stamper’s Select White cardstock from Papertrey Ink, and I wanted a blue gradient near the bottom, fading into white at the top. I pulled out a couple of blender brushes, the Lapis Lazuli inks (Azurite, Ultramarine, Eastern Sky and Iceberg) from Altenew and started blending from the darkest at the bottom to the lightest at the top.
Once I was happy with my blending, I die cut a bunch of snowflakes. I used an old die from Marianne Design (CR1335) which cuts plenty of snowflakes, as well as the Snowflake Confetti Fancy Die from Hero Arts. This is actually a cover plate, but as the name suggests, it creates confetti in the shape of snowflakes. I put the positive die cut back into the packaging to use for another card and glued the snowflakes to my background. The stark white of the snowflakes was a little too white for the sentiment I was putting on top to stand out, so I went back over with more blue ink once the snowflakes were adhered. This toned them down a bit, just enough for my die cut word to stand out.
Speaking of die cut word, I used this wishes die from Mama Elephant and die cut three layers of white cardstock, which I glued together for dimension. For the polaroid frame, I used the Precious Polaroids die set from My Favorite Things and die cut three of those as well.
I adhered the polaroid frame and the die cut word to the card front, popped the little penguin into the opening of the polaroid using some foam tape and completed the sentiment with a stamped word from the new sentiment set from Lili of the Valley, cut down to a strip and adhered with a couple of additional strips of cardstock behind it. Because dimension is life!
I hope you check out the new release from Lili of the Valley, there are so many great images and sentiments in these sets, the possibilities are endless!
This is 
After coloring the image with Copics, I used the largest of the dies from the A2 Stitched Rectangles STAX 1 set from My Favorite Things to turn it into a panel. I adhered it to a top fold card base I created from Hibiscus Burst cardstock from Papertrey Ink, before gluing on a scrap piece of doily from Doodlebug Design in the upper right corner. I stamped and white heat embossed a sentiment from the Julehilsen stamp set from Norsk Stempelblad AS onto a die cut piece of patterned paper from Bo Bunny. I added another die cut piece of patterned paper (this dotted pink is from Sunny Studio) and stapled the two pieces together before mounting them to the card using foam tape. I put another scrap of the pink in the opposite corner of the card and finished off with a few snowdrift sprinkles from Little Things from Lucy’s Cards.
Colors for this crazy combo. Evidently I forgot to include the greens, but they are BG99, G99, YG67, YG63 and YG61.
This cute image with the penguin, reindeer and bear peeking up from behind something stole my heart. It’s from the Snow Cute set, which includes another one of these peeking images and six individual penguins. I colored a winter sunset behind them before coloring the critters, used a black Glaze pen to make their eyes extra black and shiny and also put a dash of Glossy Accents to Rudolph’s nose. Once the layer of Glaze was dry, I added white dots using a 05 Gelly Roll pen.
I fussy cut the image at the bottom and added my narrow panel to a white cardstock panel. At the bottom of the panel I stamped the word Christmas from the sentiment set using Ocean Tides ink from Papertrey Ink. I adhered the white panel to a top fold landscape card base I created from Ocean Tides cardstock, also from Papertrey Ink.
I white heat embossed a sub sentiment from the sentiment set onto Ocean Tides cardstock, cut it down to a strip and adhered it to the card with a few extra layers of cardstock behind it for dimension.
I decided to keep the card very simple and added a few snowdrift sprinkles from Little Things from Lucy’s Cards to finish.
The sprinkles add a little bit of dimension to the card. So does the sub sentiment. In this photo you can even see that Rudolph’s nose sticks out a little because of the Glossy Accents.
I used a lot of Copic colors for this image.
For today’s card, I no line colored this selfie with the penguin and snowman from the Selfies with Santa stamp set, designed by Stacey Yacula for My Favorite Things. I love this stamp set and went with a pink to yellow winter sunset in the background, and a grayish green and brownish orange for the rest. Somehow it works. Onto a card base I created from Stamper’s Select White cardstock from Papertrey Ink, I stamped snowflakes from the Flurry of Love stamp set from My Favorite Things using Fossilized Amber Distress Oxide ink. I didn’t have an ink in the same tone as my coloring, but the yellow works.
I mounted my the selfie at an angle using foam tape, die cut the Merry Script die from Mama Elephant several times from Ocean Tides cardstock from Papertrey Ink and stacked them together for dimension. I stamped and white heat embossed the word CHRISTMAS from the Itty Bitty Holiday stamp set from My Favorite Things, and adhered that below the die cut word with 6 additional strips of cardstock behind it for dimension. To finish off the card I adhered a few sequins from the White Orchid sequin mix from Little Things from Lucy’s Cards.
Lots of colors for this one.
I printed the image on a piece of X-Press It blending card, extending the candy cane so it would run along the entire left side of my card front. The line style of the image is somewhat sketchy, which means you can’t really mess up creating an additional couple of lines. I colored the image with Copics and sprinkled on lots of chunky white embossing enamel, before melting the granules from the back of the cardstock.
I wanted a big sentiment for this card, and chose the Let It Snow die from Lawn Fawn to create it. I cut once from Hawaiian Shores cardstock from Papertrey Ink, and three times from white cardstock, also from PTI, to create a chipboard like element that adds dimension to my card. I finished off with a few snowflake sprinkles from Little Things from Lucy’s Cards.
Simple color palette. I would never pair red with green for a Christmas card (I’m not a fan of complementary colors), but red and teal works sooo well.
This image is the perfect fit for a mini slimline card. I colored it with my Copics, before using a die from the Slimline Starter die set from My Favorite Things to partially die cut my panel twice to get it down to the perfect size.
I adhered the colored piece onto a mini slimline card base I created from Sour Apple cardstock from My Favorite Things.
Onto the balloon, I stamped a sentiment from the Bursdag inch stamp set from Norsk Stempelblad using VersaFine Onyx Black ink.
I adhered some sequins from the White Orchid Sequin mix from Little Things from Lucy’s Cards here and there on the scene to embellish a little.
I really wanted the image to be the focal point of this card, and with this festive gang of party goers, I think it is.
Simple, analogous color palette for this card.
I colored the image with Copics and die cut the panel using the largest die in the A2 Stitched Rectangles STAX 1 die set from My Favorite Things, before adhering it to a card base I created from Sour Apple cardstock, also from My Favorite Things.
On my cluster cards, I usually choose two to three colors from the image to create scraps from. This time I chose green and yellow with a little bit of gray. Neutrals are always a good thing to add. I keep die cut scraps in stamp storage pockets on my desk, sorted by color. Whenever I want to create a cluster, I choose the storage pockets with the colors I want, dump the contents on my desk and start PLAYING.
For this card I wound up using scraps from 3ndypapir, Karen Foster, Sunny Studio, P13, Magnolia and Papirdesign. By limiting the size and colors of my clusters, the design stays harmonious and you can’t tell that I’ve used patterned paper from 6 different companies. I adhere some directly to the layer below, some using foam squares. As a base, I used half a doily from Doodlebug Design that I had in a drawer. I love these tiny paper doilies, they’re perfect for this.
Using VersaFine Onyx Black ink, I stamped a sentiment from the 
These cluster cards are so fun to make. They make my piles of scraps shrink EVER so slightly, but anything’s better than nothing, and I love the dimension they add to the card.
I used quite a few colors for this one.
I used the 
Once my coloring was done, I adhered it to a top fold A2 card base I created from white cardstock. Using the Snow Drifts Cover-Up die from My Favorite Things, I die cut three wavy pieces from solid colors Of cardstock to go towards the top of my card. I used Limeade Ice, Lovely Lady and Harvest Gold, all from Papertrey Ink. I butted them right up against each other, added them to a backer so I could handle one piece instead of three and mounted them on foam tape. I then die cut the Thanks from the Twice the Thanks die set from My Favorite Things four times from white cardstock from PTI. I love the cardstock from Papertrey Ink, it’s my favorite!! Onto a strip of Lovely Lady cardstock, I white heat embossed a sub sentiment from the Itty Bitty Basics stamp set from My Favorite Things and mounted it below my stacked Thanks die cut. To finish I added a few Sparkling Clear Sequins from Pretty Pink Posh.
Soft, simple color palette for this one.
The stamp is called Coco Loco, the name’s even funny. And also very fitting. I printed it near the bottom left of my panel of X-Press It blending card and printed my sentiment near the top right corner.
I did some very simple Copic coloring of the palm tree, the beach and also colored a pale blue halo around it to give the illusion of some sort of sky around it. I prefer the look of this light blue on the outside of the actual image instead of the bright white of the paper, I think it looks more finished this way.
I used the largest die in the A2 Stitched Rectangles STAX 1 die set from My Favorite Things to trim down my panel slightly and add faux stitching around the edge, before I adhered it to a card base I created from New Leaf cardstock from Papertrey Ink.
I added some brown enamel dots from Papirdesign near the sentiment and also a couple near the image itself to embellish a tiny bit. I love enamel dots!
To enhance the nuttiness of this image, I colored the cheeks pink and added Glossy Accents to what was already crazy looking eyes for a bit of extra fun.
Simple image equals simple color palette.
I colored the image with Copics and used the largest die in the Slimline Double Stitched Rectangle STAX die set from My Favorite Things to cut it down to the perfect size panel to go onto a slimline card. I adhered it directly onto a card base I created from Enchanted Evening cardstock from Papertrey Ink.
From Berry Sorbet cardstock from Papertrey Ink, I die cut the Happy Birthday Brush Script die from Simon Says Stamp three times and stacked the diecuts for a dimensional look, before adhering them below the image on my card. I added a layer of Frosted Lace Stickles to the star on top of the cake and scattered a few chosen sequins from the Seaglass mix of sequins from Simon Says Stamp to finish the card.
Lots of Copics for this one.
Papirmølla 