Hi, everyone! Time for yet another Christmas card today. This could technically work as a regular winter card, too, and those cards are good to have on hand to send out during those dark winter months to brighten someone’s day.
I used Anyu and Nanook Igloo for my card today. They’re part of the Anyu and Nanook set. I set the opacity to 10 % in Photoshop and printed my image. I love the look of no line coloring, especially when doing snow and ice. I colored in my little image using Copics, and wasn’t too sure at first what I wanted to do with it. I debated my regular cluster with a sentiment in the top right corner, but felt I needed to do something different because I had so much white space below the image.
I used my trusty faux stitch rectangle die from My Favorite Things to turn my colored piece into a panel before stamping the perfect sentiment from Mama Elephant’s Holiday Messages stamp set using Enchanted Evening ink. I wanted to pick up the blue from the little girl’s coat, and this is such a pretty blue. I sprinkled on chunky white embossing powder and heated the panel from the back to create my snowy look, before adhering my panel onto a cardbase I made from After Midnight cardstock from My Favorite Things. I added a few snowflakes that I diecut using an old Marianne Design die that I absolutely love, and my card was finished.
Here you can see the effect of the chunky white embossing enamel. It’s nice and thick and adds a bit of texture to the card, it kind of feels like braille when you touch it, it’s really cool, not to mention quicker than drawing on snowflakes with a white pen, also with the added bonus of it being more random than you’re able to achieve on your own.
No surprise that I used mostly cool tones for this card, except for the skin colors and the ears and tongue of the dog.
Whenever I have background elements, I pretty much always start with those, and today was no different. I colored in the snow first, both on the roofs and on the ground, before coloring the sky and then the building.
After I’d also colored in the fox, the mailbox and the penguin, I added a sentiment from the 
Plenty of colors used, but there are a lot of images in this one.
For today’s card, I used the image “
I die cut the words oh so merry from the Penguin’s Waddle die set from Mama Elephant a few times from white cardstock and stacked them for a dimensional look. I added chunky white embossing enamel to my scene, glued my panel onto a card base made from Pure Poppy cardstock from Papertrey Ink and glued my diecut words in the sky. I stamped and white heat embossed “& bright” from the Holiday messages stamp set from Mama Elephant onto a scrap of the same red cardstock and glued that below my diecut words. I added a few diecut snowflakes with pearls in the centers as my finishing touch.
Lots and lots of marker, many of them used on the snow, believe it or not.
I love these stamps!! And I do believe this is the first time I’ve colored a goose! And it’s such a cute goose too, she (her name is 
I was going to make a 5×7″ card, but changed my mind. It meant that 
The bears are 
To me, this color scheme is a bit untraditional, but I didn’t want to go with the same red and green combo I used for my last card, so I had to come up with something new. Somehow, I had it in my head (thanks to Liz) that my toy store needed to be red, so I came up with a combination of a pink based red, a light, peachy color and a brighter green than the greens I usually go for.
Lots of Copics used for this one, I did color in the whole front of the card, after all. I stamped the background using Fadeout ink from Inkon3, so once my Copic coloring was done, I went in with a gray Prismacolor for details on the windows and a little bit of brown for the horse and the ribbon on the presents in the display windows.
When I first got the stamps, the first thing I did was create masks for each and every single one of them. Time consuming, sure, but so worth it to be able to create scenes like this. For this card, I started by stamping the S
I colored the scene using Copics, making sure to use muted, soft colors for the background and brighter colors and more detailed coloring for the snowman and his friends. That penguin chick had me, I love him!! I stamped a sentiment from the 
I cut my colored piece down a little and was going to add it to a 5×7″ card base, but realized I’d cut too much off the height, so I had to shrink the card front accordingly. The finished card measures 5 x 6 1/2″. A bit of an unusual size, I guess, but I think it works. I added a piece of green patterned paper from Papirdesign to my white side folding card base and mounted my colored piece with plenty of foam tape. Normally I’d use Stormy Sea card stock for my base, but I didn’t have a piece big enough, and that patterned paper (without much of a pattern) was a great match.
Lots of colors for this one, but I used the ones before T7 on the snow alone… No wonder it’s a lot.
Once I’d colored the image with Copics, I used the largest die in the A2 Stitched Rectangle STAX Set 2 from My Favorite Things to die cut a landscape oriented panel that would fit perfectly on my card base with a 1/16″ border around. I like the 1/16″ little frame, AND it’s the same width as the distance from the faux stitching to the cut line. I like having them the same. Little details like that matter, to paraphrase a famous German architect (Ludwig Mies van der Rohe, who coined the term “God is in the details”).
I created a top fold card from Stormy Sea cardstock from Papertrey Ink. It’s a color that matches the BG90 family from Copic really really REALLY well. I need to order more, I only have half a sheet left of this color. I used the same color cardstock to diecut the word wishes using a die from Mama Elephant that was free with purchase if you spent a certain amount during their birthday extravaganza back in September. Normally I’d diecut the word several times in the color I wanted, but since I was running super low on this particular grayish green, I used a few layers of white diecut words, and only one layer of the colored cardstock on top. I stamped and white heat embossed the word “holiday” from the Iconic Ornament stamp set from Mama Elephant, also free with purchase over a certain amount on the Mama Elephant site back in September. I added a few more layers of cardstock behind it for dimension and glued it to my sky using Gina K liquid glue, which I also used for the die cut word.
I decided not to add any additional elements. No embellishments, no nothing, I didn’t want to distract too much from that adorable image.
Not a lot of Copics for this one, and 14 of these were used for the snow and polar bear.
I used a very bright red for the hat and sweater on the mouse, and the only color that really goes with it, in my opinion, is gray. I found some red and gray die cut scraps from a couple of Maja Design collections (Fröjdefull Jul and Joyous Winterdays) and made a little mini cluster in the top right corner.
I started with a mini paper doily from Doodlebug Design, added a red fishtail flag frame die cut with a die from My Favorite Things, then a piece of a ticket die cut with a Docrafts die. I used some 1 mm foam squares for that. I added my sentiment at the end, which is from one of those strips at the bottom of the 12×12″ papers that you usually cut off. Maja Design has always had some kind of pattern on the back of theirs, which means that nothing needs to go to waste. This one was perfect in gray with a hint of red, and I used 1 mm foam squares to add it. I even doubled up on the foam on the left hand side of it.
I added some red enamel dots from Papirdesign to finish it off, and glued a leftover piece of the doily to the bottom left corner and an additional two dots. I added my panel to a top folding card base I made from Gravel Gray card stock from My Favorite Things.
This was a very simple image to color, so obviously I didn’t use a lot of colors.
I love no line coloring, and this guy with the candy cane was so much fun to color up. I added snow flurries to the background with a gelly roll pen when I did my coloring, and once I’d die cut my colored piece I wanted even more snow, so I sprinkled on embossing enamel, as well, and melted that.
I even added a few snowdrift sprinkles from Little Things from Lucy’s Cards once my card was assembled. I love this look of snow on Christmas cards.
The sentiment is from the Scripty Xmas stamp set from Mama Elephant, stamped in Lady Bug ink from Memento. I added my panel onto a 4 1/4 x 4 1/4″ top folding card base I made from Electric Red card stock from My Favorite Things.
I started by coloring my little snowman and his friend using my Copics. I went with a bit of a split complementary color scheme on this one. I’m no fan of complementary colors, but split complementary are infinitely better, and blue green (which I used for the snow on the snowman), purple and orange are split complementary colors. I didn’t want a bright orange, though, so I went more coral, and I love how it turned out.
I used a faux stitch rectangle die from My Favorite Things to turn my colored piece into a nice panel. I love these dies, they add such a finished look. I sprinkled on a moderate amount of chunky white embossing enamel from Stampendous and melted the powder. I love the snowy look this gives.
I mounted my die cut piece onto a card base made from Lavender Fields cardstock from My Favorite Things using plenty of foam tape. This color perfectly matched the purple in my image, something I always try to accomplish in my cards for a nice, cohesive design. I die cut and stacked four Hurra from Melon Berry cardstock from Papertrey Ink using a Kort & Godt die. I love stacking die cuts, it adds a super nice look of dimension. I also white heat embossed a sub sentiment from Norsk Stempelblad AS onto more of that Lavender Fields cardstock, and stacked that, as well, making it flush with the die cut word.
I added a couple of sparkling clear sequins from Pretty Pink Posh and my card was complete. I cut a little bit off the largest one with my scissors to make it look like it’s tucked behind that sentiment strip.
Last, but not least, the Copic markers I used to color my image. I also used B40 and BG71, which are colors I’ve made myself.
I used a square die from Lifestyle Crafts to die cut my elf down to the size I wanted, in this case 4″.
I then stamped a sentiment from the Scripty Xmas stamp set from Mama Elephant using Enchanted Evening ink from Papertrey Ink, before gluing my panel to a 4 1/4″ square card base made from Dark Indigo cardstock, also from Papertrey Ink. I finished off my card by gluing on some stars from a sequin mix from Hero Arts. They’re iridescent, which I’m normally not a big fan of, but it worked on this card.
I love the ease of clear stamps, but rubber stamps like this one have much finer lines, and they stamp beautifully every single time, I love that. I also love blue for Christmas, but that’s hardly a secret 😉
Papirmølla 