Hi, crafty friends. Today I’m sharing with you a mini slimline card for the holidays. I love the Penguins and Reindeer stamp set from Lili of the Valley, and this reindeer in the set was the perfect amount of festive for my card.
I colored my reindeer with Copics and fussy cut him leaving a thin white border. I added Glossy Accents to the string of lights and his nose for shine, and used a black Glaze pen and a white Gelly Roll 05 for his eyes.
I stamped and white heat embossed the Christmas Background stamp from My Favorite Things on a piece of white cardstock, before using Hunter Green, Forest Glades and Frayed Leaf inks from Altenew, as well as Squeezed Lemonade Distress ink, to ink blend on top. I ten used a die in the Stitched Mini Slimline STAX die set from My Favorite Things to turn it into a nice panel that would fit my card. I used the Country Landscape die from Memory Box to die cut the landscape in the background, and used the same stitching die on the hilly die cuts for a continuous stitching border across the card. I die cut the windows from Buttercup cardstock from Concord & 9th and the doors from white cardstock from Papertrey Ink that I ink blended with the same colors I used for the ink blending in the background.
I used the Snow Globe Accessories die set from My Favorite Things to die cut the string of lights from a dark gray cardstock and the individual bulbs from Buttercup cardstock once again. I added Glossy Accents on top of the bulbs for extra shine and dimension.
I die cut the word merry from the Merry Christmas die set from My Favorite Things five times from white cardstock, and once from Gold shine cardstock from My Favorite Things. I stacked them, adding the gold on top, and adhered my chunky die cut to the card. I stamped and white heat embossed a sentiment from the Christmas Greetings stamp set from Lili of the Valley onto a strip of Parsley cardstock (I used the same cardstock for the card base) from Concord & 9th and adhered it to my card with a few extra strips behind for strength and dimension, before finishing off the card with a few gold pearls from the Vanilla Kiss mix from Little Things from Lucy’s Cards.
I tried using a somewhat limited color palette for this.
I colored the strawberries and fussy cut them right up against the black lines. I put them aside while I worked on the rest of my card. I created a top fold landscape A2 card from Stamper’s Select White cardstock from Papertrey Ink, used the Number Jumble background stamp from My Favorite Things to stamp on the front with VersaMark ink, then heat embossed using Iridescent Sparkle embossing powder from Judikins. I ink blended on top of the embossing in the center using Grass Field and Limeade inks from Altenew, as well as Squeezed Lemonade Distress Ink from Ranger.
Into a separate panel of white cardstock, I die cut the letters SWEET using the Impact Alphabet dies from My Favorite Things. I stamped a sentiment from the Scripty Bday stamp set from Mama Elephant below using Wild Cherry ink from My Favorite Things. I cut the panel down slightly, added two more layers of cardstock behind it for dimension and adhered it to the card front. I adhered one of the strawberries using liquid glue, popping the other one up using foam tape for dimension, before finishing off the card with a few bubbles from the Festivities mix from Little Things from Lucy’s Cards.
You wouldn’t think I’d use this many colors on images this small, but that’s kind of what I do.
I knew I wanted lots of green on this card, and as soon I was done coloring skin, hair and the ground, I grabbed a few green combos and colored in all the elves. I hit a bit of a snag when I got to Mrs. Claus’ dress, because I felt like there were no good color options. Grey would have been boring, brown would have been sad, red wouldn’t work with the amount of green I had and I felt a little lost, to be honest. Color buddy Liz to the rescue. She suggested the RV90s, and they worked beautifully. I’ve combined RV90s with green plenty of times in the past, but usually for florals, and I have to admit it’s been a while, so it was fun to use an old classic again.
Once the coloring was complete, I used the largest die in the A2 Double Stitched Rectangle STAX die set from My Favorite Things to create a nice detailed edge around my panel and adhered it to a top fold card base I created from Autumn Rose cardstock from Papertrey Ink. I used most of a mini doily from Doodlebug in the top right corner of the card for a little bit of soft texture, and added a small scrap of the same doily in the lower left corner for a little bit of balance. I used a tag die from the Everyday Gift Box die set from My Favorite Things to create my tag, and stamped and white heat embossed a sentiment from the Mini messages stamp set from Mama Elephant in the center of it. I tied some Green Apple Divine twine into a bow and mounted the tag using a couple of foam squares before finishing off the card with a few gems from Crafty Meraki. These are the Green Illusion Sparkle and they change color when you tilt them in the light. They appear green and somehow shift to a pink/purple tone, they’re really cool, and the colors worked perfectly for this card.
Lots of green for this one. I used four different green combos to color in the elves so they wouldn’t all look the same. I also used RV97, a color I’ve created myself, for the dress on Mrs. Claus.
I colored the characters with Copics, fussy cut them leaving a white border, then added black glaze to their eyes and then a white dot on top with a Gelly Roll 05. Rudolph got special treatment with a little bit of Glossy Accents on his nose for additional shine.
I used the Slim Card Basics die set from Mama Elephant to create my window panel. I die cut one from Blueberry Sky cardstock from Papertrey Ink and four white ones that I adhered behind it for dimension. I die cut the bigger scalloped rectangle in the Slim Card Basics set from Spring Rain cardstock, also from Papertrey Ink, and adhered it to a white card base.
I used the Silhouette Snow Trees die set from Mama Elephant to create white trees to go into the window openings behind my characters.
I stamped a sentiment from the 
I finished off the card with a few pearls from the Glossy Porcelain mix from Little Things from Lucy’s Cards.
I love dimension on my cards, and this one certainly has that.
Between the shine on Rudolph’s nose, all the blue and all the dimension, this card makes me happy. I just wish it was easier to photograph slimline cards.
I used way too many Copics for these three.
I colored the trick or treat mouse with Copics, and adhered my panel of X-Press It blending card to a top fold white card base I created from Stamper’s Select White cardstock from Papertrey Ink. I used the Boo! stamp from the Itty Bitty Boos stamp set from My Favorite Things to stamp here and there around the scene, with Limelight ink from My Favorite Things, using second generation stamping for a couple of them for a softer look.
I added a couple of pieces of orange dotted patterned paper from Waffle Flower above and below the image. I put foam tape on the back for dimension.
I printed the ghosts on Heavyweight Translucent vellum from My Favorite Things and colored softly with Copics on the back of each of them. Colors don’t really blend on vellum, so you don’t need to be precise. You also need darker colors than you want to end up with, because the colors don’t show through all that well. I fussy cut the ghosts leaving a border around the edge and adhered two of the ghosts directly onto the orange patterned paper, using a little bit of liquid glue, before strategically placing enamel dots from Papirdesign on top, so the glue wouldn’t show through.
I used the Happy die from the Hand-Lettered Happy Birthday dies from My Favorite Things to create my sentiment. I stacked four white die cuts, adhered the last ghost to the y and added a fifth die cut on top. The top layer sparkles in the right light. I used a sheer shimmer craft spray from Imagine, but it doesn’t really show up in photos. It’s subtle in real life too. To finish off my sentiment I white heat embossed another sentiment from the Itty Bitty Boos stamp set from My Favorite Things, this time onto Gravel Gray cardstock from My Favorite Things. I cut it down to a strip, added a few layers behind it for strength and dimension and adhered it to the die cut word, and my card was finished.
I used quite a few Copics for this card.
I knew I wanted to do something fun with the poinsettia die set from Kort & Godt. The die set comes with three dies in three different sizes. If you die cut two of each, you get a poinsettia. There’s also a leaf die in the set. I die cut three leaves and created four of each size of the petals for a very full poinsettia. I used a patterned paper from the Ink Drops – Vivid paper pad from Craft Consortium for everything paper on this card except for the white cardstock. Before assembling my poinsettia, I curled all the leaves back a little so they wouldn’t appear flat. I just used a paint brush handle, anything that you can use to create that curve will work. I put foam squares on the back of the petals at the very back, but adhered the center of the poinsettia directly to the white die cut panel. I also put foam squares on the back of the leaves.
I die cut the word gledelig four times; once from the patterned paper, three times from white cardstock. I stacked them for dimension, adhering the patterned paper one on top of the others. I stamped and white heat embossed jul to complete the sentiment (the die set with gledelig also has the word jul in it, but it was too big for my card). I used a glue gun to add berries to the center of the flower and embellished with a few white pearls.
The curved leaves and the berries add a lot of dimension to this card. I love that the dies impress the veins of the leaves and petals into the die cuts.
I colored the mouse with Copics and fussy cut her, leaving a thin white border. I used a black Glaze pen to create some shine in her eyes, and once the black was dry I added a dot of white using a Gelly Roll 05.
Onto a white cardstock panel, I ink blended Amarena Cherry and Wild Cherry inks from My Favorite Things for an ombre effect. I then used a die cut as a stencil to add some snowflakes to the background with modeling paste from The Crafter’s Workshop. The die I used to die cut the makeshift stencil is the Snowflake Confetti fancy die from Hero Arts, which is one of my all time favorite Christmas/winter dies.
I cut the ink blended panel down a little and adhered it to a panel of Amarena Cherry cardstock from My Favorite Things that covers the front of a top fold white card base I created from Stamper’s Select White cardstock from Papertrey Ink.
From white cardstock, I die cut the Polaroid Shaker Frame die from My Favorite Things five times for a stacked look, stamping a sentiment from the Christmas Greetings stamp set from Lili of the Valley to the top layer using Amarena Cherry ink from My Favorite Things. I added the cute little mouse on top of the frame, and my card was complete.
If you look closely, you can see the shine in the eyes in this photo.
Very Christmas-y color palette for this one.
I changed the color of the words monkey see in Photoshop before printing the image. I then colored the image and letters with Copics and used the largest die in the Wonky Stitched Rectangle STAX die set from My Favorite Things to create some interest to the edges, as I was planning on leaving lots of white space.
I adhered the panel to a top fold A2 card base I created from Ocean Tides cardstock from Papertrey Ink. I love this cardstock color, it’s great for every kind of card.
I used the Fab Foliage die set from My Favorite Things to die cut different leaves in different colors of cardstock. I used Ocean Tides (it really works for everything), Green Parakeet and Spring Moss, all from Papertrey Ink. I even threw in some that I die cut from Heavyweight Translucent vellum from My Favorite Things.
I cut some of the leaves down to fit my card and used a tiny bit of liquid glue at the base of each stem. This way the leaves have a bit of lift off the card, which also adds a little bit of interest.
I finished off with crystals, sequins and pearls from the Starry Night mix from Little Things from Lucy’s Cards.
A fairly soft color palette for this one. In addition to BG18 and 72 for the letters, I also used BG71, which is a color I’ve created myself.
I’ve made a cool card (pun intended) with the 
Using the Watercolor Wash Free Form stencil from My Favorite Things along with Icy Water and Frayed Leaf inks from Altenew, I did some very soft ink blending to create a little bit of interest to my background. I then ran the panel through my printer to add the sentiment, chopped off a little on each side of the panel and mounted it onto a top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink.
I put foam tape on the back of each of my popsicles and adhered them above the sentiment.
I finished off the card with pearls, crystals and dew drops from the Fresh Mint mix from Little Things from Lucy’s Cards.
Soft color palette for this one.
The design of these snowmen peeking out from behind something offers so many possibilities for fun card designs. For my previous card using one of these, I created a tri fold card with the snowman peeking out behind one of the flaps. This time, I have a snowman sticking out above the top of the card.
I colored my snowman with Copics, cut away everything below the line in the image and adhered him to the top of a quarter sheet of Stamper’s Select White cardstock from Papertrey Ink, before cutting around him.
I adhered my panel to a top fold white note card I created from Stamper’s Select White and cut off the bottom of the card, so that it’s 5 1/2″ tall including the snowman.
I glued on white snowflakes all across the front. I used the Snowflake Confetti Fancy die from Hero Arts and die CR1335 from Marianne Design to create the snowflakes. I like the white on white look. This adds a tiny bit of dimension and interest to the background.
I then used the Big Happy Holidays die from Mama Elephant to die cut five times from Blue Yonder cardstock from My Favorite Things, before stacking them and adhering my chunky die cut in the center of the card.
I stamped and white heat embossed Let’s be jolly! onto a strip of Enchanted Evening cardstock from Papertrey Ink. The sentiment is from the 
Small image, but as usual, I went overboard when coloring the snow, so there are quite a few Copics used anyway.
Papirmølla 