Hi, crafty friends. I’m sharing a sweet, simple card today that I created for the Kort & Godt galleri blog.
I started with a panel of Stamper’s Select White cardstock from Papertrey Ink that I dry embossed. I then used a stencil set (the Butterfly Blooms set from Concord & 9th) to add the color. I used all inks from Concord & 9th: Powder for the background, Sprout and Parsley for the greens, Sunshine and Buttercup for the florals and Pink Lemonade and Honeysuckle for the pinks.
Once the panel was all inked, I adhered it to a white card base, created half circle notches at the top and bottom with a small circle die and thread some cotton thread through, which I tied off in a bow. I added pink sparkly gems to act as the bodies of the butterflies and finished off with a couple of black sentiment sticker strips that I mounted on foam tape. I love the softness of the background against the bold of the black. The black really draws your eye.
Kort & Godt products used:
TR124 (black cotton thread)
ST176 (pink gems)
ST1014 (black sentiment sticker strips)
I fit a lot of images into this scene. 
I colored in my scene with Copics, opting for very vibrant colors for all the floating elements and the details on the boat house, while keeping the rest fairly muted. The lake is lighter the further back you get, and the sky is a bit moody off in the distance. I added a bit of black glaze pen to the eyes of the gang on the pier for a little bit of dimension and shine.
I stamped a sentiment from the 
I adhered the panel to a card base that measures 6 1/8″ x 4 1/4″. This is an irregular size for a card, but when I create scenes like this, I let the scene dictate the size of the card. I can always make a custom envelope to fit.
I used lots of Copics for this one.
I knew I had to color up this image as soon as I saw it. This is so adorable with the corgi hanging off the top of the glass. And so funny, and very typical of Pei’s illustration style. I love it!
I colored the image with Copics, fussy cut him, then added VersaMarker pen to the rim of the glass and used white puff embossing powder from Wow! to mimic a salt rim. The embossing also adds some fun texture to the glass. I also used a black glaze pen to add a little bit of shine and dimension to his eyes.
I ink blended Parsley and Starfruit inks from Concord & 9th onto a white cardstock panel for an ombré effect, then used the Geometric embossing folder from WRMK to create some subtle dimension. I added the panel to a card base I’d covered with Parsley cardstock from Concord & 9th, before mounting the image using foam tape.
In this release there are also a few sentiment sets, and this one from the 
Simple color palette for this one. This was so fun to color!!!
I started with a panel of white cardstock. I put down the first stencil, which is for the background, and used Harbor and Powder inks. The second stencil does the stems and leaves, and I used Sprout with a bit of Parsley at the base for those. For the large part of the flowers, I used Ballet Slipper and for the fourth and final stencil, which is for the smaller part of the flower, I used Honeysuckle. I also used the small circle burst stamp in the stamp set to add a little more detail. I stuck to Honeysuckle ink, and I just love the way these flowers turned out.
I used the cover die to create a frame from white cardstock that I glued on top of my ink blending. I mounted sentiment sticker strips from Kort & Godt using foam tape and adhered the sentiment in the top third of the card. I rarely add my sentiments to the top right, but I think it works. I finished off very simple with a few iridescent dew drops from Pinkfresh Studio.
The Blended petals set from Concord & 9th is a very versatile one with a large flower image that you can color up any way you’d like. There are even coordinating stencils that let you add color very easily, which is what I used for my card. As much as I love coloring, stencils make everything go so much faster!
I stamped the image in black ink, let it dry and used the coordinating stencils to color it in using Creamsicle, Sweet Pea, Wildberry, Sprout, Tidepool and Peacock inks, all Concord & 9th colors. I then used the coordinating die to cut out the image, adding a couple of blank die cuts behind it for dimension.
I used the Twist Pattern press plate from Pinkfresh Studio along with some Pistachio Fresh Dye ink from Altenew to create a subtle pattern in the background. I die cut it using the coordinating die and added two more die cuts behind it before adhering it to the front of a top fold card I created from Stamper’s Select White cardstock from Papertrey Ink, which is the same white cardstock I used for everything except the sentiment.
Speaking of the sentiment – I used the Sweet Sentiments die set from Altenew. The top layer is from white mirror cardstock from Kort & Godt, the black is black mirror cardstock from Kort & Godt, and then I put three additional die cuts of the shadow die behind for dimension. I finished off the card very simply with Iridescent Dew Drops from Pinkfresh Studio.
I looked for a kickboixng image I could color up, as I wanted that to be the main focus on the card – it was his main hobby. I didn’t have one, nor could I find one, but I found this greyscale sketched image with boxing gloves that was perfect.
The gloves cover the entire front of the card. I still needed something to color, because a black and white image isn’t very interesting on its own. I settled on 
I mounted the colored image on pieces of foam tape, making sure to add a magnet in a strategic spot to keep the flap from opening on its own. I put another magnet behind the image of the gloves to keep both magnets hidden. They’re still plenty strong enough to work through a couple of layers of cardstock.
Once you open the glove fully, there’s a sentiment from an old confirmation stamp set from Stempelglede, stamped in Wild Cherry ink from My Favorite Things. I used one of the dies in the Essential Stitched Sentiment Strips die set from My Favorite Things to create a flag end to pull the glove open when the card is closed. The magnets are so strong, it won’t open on its own, and by adding the little flag end, it gives the recipient a little clue to look behind the glove.
Back to the front of the card when it’s closed. I stamped an white heat embossed the word KONFIRMANT from the A05 stamp set from Norsk Stempelblad AS onto a piece of Red Hot cardstock from My Favorite Things, and then die cut it using a banner die from MFT – they have lots! I popped it up and made sure the end crossed into the image, to tie the two together. I did the same thing with my letters, die cut using the In Stitches Alphabet die set from My Favorite Things, also from Red Hot cardstock. I stacked a few layers for dimension and stability, the L and the U are only barely attached to the glove and the back of his left leg, so they needed a little bit of strength.
I finished off the front with a few red enamel dots from Papirdesign.
On the inside, I printed and cut out a checkerboard pattern, which I thought worked well with the car racing theme. There’s still plenty of room to write a personal message. I also used the Wax Seals die set from Waffle Flower to create a rosette badge with a Norsk Stempelblad AS confirmation sentiment heat embossed in the center. I used the Itty Bitty Strips dies from My Favorite Things to create the ribbon ends hanging down from the actual rosette.
On the back of the card, I used more of that checkerboard pattern, stamped another confirmation sentiment (it’s actually an Emerson quote) and used the Splash die set from Papirdesign to create some water splashes from Summer Splash cardstock from My Favorite Things. I thought they tied in well with the super soakers in the colored image on the front of the card.
A simple color palette to finish off. This card was a hard nut to crack, but once I got going I had a blast (no pun intended) creating it.
I actually decided to watercolor this one with my Zig Clean Color Real Brush markers. I prefer using a paintbrush with water with these, but there’s also a blender that you can use. Marcel is small, but I still used three different browns and a pink for him (064 Oatmeal, 607 Milk Tea, 068 Deep Brown and 200 S. Almond Pink). For Elliot and the die cut letters I used 312 Overcast Sky only. I did use a little pink for the bow on his tail, but for the actual elephant, it was just the one blue. I love the movement you get with watercolor, it’s something you can’t really achieve with Copics.
I fussy cut my image, leaving a thin white border. Using the Impact Alphabet die set from My Favorite Things, I die cut the letters to spell out STOR (big) four times from white cardstock and once from Black cardstock from Concord & 9th. I used the Parker lowercase alphabet die set from Memory Box to die cut the letters for klem (hug), again four layers of white, this time topped by a layer of the watercolor paper.
I stacked my layers, and sandwiched the image between the white and black letters for the large word. I created a black mat on the card front, covered that with a piece of green patterned paper from the Watercolor Wash 6×6″ paper pad from My Favorite Things and mounted the letters and image in the center. I adhered the klem letters directly on top of the larger letters and added a sub sentiment sticker strip from Kort & Godt below it. I popped it up a bit to level it with the black letters, before finishing off with a few dew drops from the Spring Leaves embellishment mix from Little Things from Lucy’s Cards.
I started by running a panel of white cardstock through my die cut machine with an embossing folder. I chose the Crystal Distortion embossing folder from Simon Says Stamp, which leaves some fun texture in the background without being too distracting.
I added the tigers to the panel with some foam squares. The texture on the dry embossed panel makes it uneven, and the foam squares help – I also love the dimension it adds. I cut off the parts of the tigers hanging off the edge, trimmed the panel down and mounted it on foam tape to a card base I created from Canyon Clay cardstock from Papertrey Ink.
The large sentiment is from the same sheet of stickers as the tigers, which means the colors fit perfectly. I added some foam squares to the back and adhered it above the bottom tiger.
I added some black bling in a couple of different sizes to finish the card. This is actually the third card I’ve shared in a row without any stamping. I’m sure I’ll use some stamping soon, but it’s fun to use other products and techniques.
Play really is the right word to use, because this is the Pattern Play die set from Concord & 9th. It’s one of those die sets where you have a large die that creates a road map and several smaller dies that cut out the shapes to go on top of the map. It’s like a puzzle, and I love playing with tiny pieces of paper, so this is right up my alley.
I die cut the smaller pieces from Pebble, Sprout, Sunflower, Sorbet and Harbor cardstocks, all C9 colors. I stacked the Sprout four layers thick for dimension, the Harbor three layers and the Sorbet two, while gluing the Sunflower and Pebble directly to the map. This creates more movement and interest to the background, and it makes the card very tactile. I cut off 1/4″ from each side, popped the panel onto foam tape and adhered it in the center of my top fold A2 card base.
With such a colorful background, I knew I needed a bold black sentiment. I chose this hallo (hello) die from Kort & Godt, which I die cut four times from black cardstock and layered for dimension. I also added a tiny sentiment sticker strip (you are cooooooool) on top of the die cut word.
To finish off the card I added enamel dots in colors that match the cardstock. Since they’re the same color as the cardstock behind them, they don’t distract from the sentiment or the background, but they do still add interest to the card.
I used the Twist pattern press plate from Pinkfresh Studio with Nectar ink from Concord & 9th on a piece of Nectar cardstock from Concord & 9th to create a subtle background. I adhered the panel to a top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink.
I mounted the tag in the center using foam tape and added a bow with white cotton thread from Kort & Godt. I adhered a couple of sentiment sticker strips with foam tape.
To finish off the card I adhered a few faceted pearls. This card is so simple, and the soft colors really are perfect for spring.
Papirmølla 