Hi, crafty friends. I’m usually pretty good at making Christmas cards all year. What I’m not usually so good at is creating Christmas tags to go on presents. It’s often one of those things I do last minute, even after the gifts are wrapped. I’m trying to be better, though, and today I have three tags to share featuring the Snow Cute stamp set from Lili of the Valley, I just can’t get enough of this set.
These penguins are about 4 cm tall, which makes them the perfect size to create gift tags from. By stamping them on a sheet of X-Press It blending card (or your cardstock of choice) with a little bit of space between them, you can die cut some and fussy cut the remaining ones. I decided to fussy cut the one in the center, while using dies for the other two.
I colored all the penguins with Copics and used a black glaze pen to create a little bit of shine and dimension to their eyes. Once the black was dry, which didn’t take long, I used a white Gelly Roll 05 on top of the black to put the white back into their eyes.
I’m starting with this fussy cut penguin. In a drawer, I had a scrap of a snowy background that I created last fall using Rustic Cream cardstock from Papertrey Ink, the Falling Snow stencil from Simon Says Stamp, modeling paste from The Crafter’s Workshop and Rock Candy distress glitter from Ranger. I decided to put it to use and die cut it using the 210 die from Kort & Godt, I really like the heart shaped hole it creates at the top. I mounted the penguin using foam tape and added a sentiment strip below. The sentiment is from the Christmas Greetings stamp set from Lili of the Valley, it’s got heaps of great sentiments for the holidays. I used a bit of red lace ribbon, a couple of bells and a piece of thread to the top of the tag to embellish it a little.
On the back, I added die cut letters to spell the words to and from. The words are from the Tag Builder Blueprints 6 die set from My Favorite Things, die cut from Amarena Cherry cardstock, also from MFT.
Simple color palette for this one.
Next up is the circular tag. I used the Tag Builder Blueprints 6 die set for this one as well, as well as another sentiment from the Christmas Greetings stamp set from LOTV. I added Divine Twine in the color Cherry to the top, a bell charm and a few red enamel dots from Papirdesign to finish it off.
On the back, I used the to/from circle die that I used for the first tag, but for this one, I used the negative of the die cut, popping in the centers of the o’s to complete the look. I figured it would be easier to see the writing on white cardstock instead of the red in the dim light on Christmas Eve when we open our presents, so this is meant to be practical too.
A few additional colors for this one, I wanted to ground my penguin and also needed some color on that candy cane.
For the blue one, I used the Fold-Up Tags die set from My Favorite Things to create my tag. I made sure not to cut off his scarf by fussy cutting that and putting it behind the die as I ran it through my die cutting machine. I used a piece of Blue Breeze cardstock from My Favorite Things to create the reinforcing element near the top, added some Divine Twine in the color Blueberry, a couple of white bells from UiT Hobby and some thread that’s actually meant to use with a loom (it’s super strong). Once again, I used the Christmas Greetings stamp set for the sentiment, and scattered a few snowdrift sprinkles from Little Things from Lucy’s Cards to finish.
On the back, I used that same die from the Tag Builder Blueprints 6 die set from My Favorite Things that I used for the other two tags, this time die cut from Enchanted Evening cardstock from Papertrey Ink.
Once again, simple color palette. These were such fun to make. I want to make more, and have a bunch on hand when it’s time to wrap Christmas presents, so I’m not rushing last minute to get the tags done.
I colored my scene with Copics on X-Press It cardstock and fussy cut right up against the black lines. This image has very simple outlines, making fussy cutting a cinch.
I covered the entire colored panel with sheer sparkle craft spray from Imagine, it adds so much sparkle, which unfortunately is hard to capture in photos. It’s there in real life, though, trust me. I glued my colored piece onto a thicker white cardstock, both for a bit of stability and to hide the back of the colored panel. Copics bleed through to the back (you want that, it’s actually a sign that you’re using a good cardstock for Copic coloring), and I usually add my panels to card bases, but this one was different. I scored the white cardstock at the bottom and glued the back flap to the back bottom of an A2 card base I created from Lovely Lady cardstock from Papertrey Ink. With hidden magnets between the layers of the card, it stays shut and doesn’t fall open.
You can see some of the shimmer in this photo, a couple of big droplets fell on the mushroom and the rainbow. I added pearls from the Igloo mix from Little Things from Lucy’s Cards for the mushroom, and used a black glaze pen from Sakura to make the eyes stand out.
Lots of Copics for this one.
There’s a stamp in the stamp set with a penguin holding a present. I thought it was perfect for a simple birthday card. I colored the penguin with Copics and added a layer of black glaze pen to the eyes for shine. Once the black was dry (this stuff dries fast), I went back in with a 05 Gelly Roll to add the white dots back in. I fussy cut the penguin and started working on the rest of the card.
Using the Snow Drifts Cover-Up die from My Favorite Things, I decided to create some waves on the front of my card. I die cut four layers from white cardstock and used various shades of aqua tones for the top layer. From bottom to top they are: Tropical Teal from My Favorite Things (bottom two waves), Caribbean Sea from MFT, Hawaiian Shores from Papertrey Ink, Summer Splash from MFT, Sno Cone from MFT and Stamper’s Select White from PTI (top two waves).
On the Hawaiian Shores wave, I used one of the big words in the 
I used the Sea Glass mix of embellishments from Little Things from Lucy’s Cards for a finishing touch. This mix was the perfect color for my card, and it’s sometimes fun to add something besides JUST sequins. There are a couple of gems and even confetti stars on this card, too, all from the same mix.
I love the dimension of those waves, it’s very impactful, and the reason I wish I’d added dimension behind my penguin, as well, I feel he’s a little flat compared to the rest. Oh well, next time.
Simple color palette for this one.
I stamped April (the bunny on the swing), masked off the rope of the swing, stamped the 
When I color full panels like this, I usually color the sky blue, but I wanted to shake things up a little for this card and gave it a soft sunset vibe instead. I live far enough north that the sun doesn’t really set until really late at night in the summer, but a girl can pretend, right? Anything goes when it’s a card, it doesn’t have to be very realistic – not that a bunny on a swing (or one holding a flower for that matter) is very realistic to begin with.
I lost track of how many layers of green I added for the grass. I wanted it to be light and soft looking almost fading into white in the background to make the foreground stand out, and darker in the foreground so the critters would look like they belonged to the scene. I started with the lighter colors for my blends, then kept introducing darker greens towards the bottom and fading up into the background until I found the intensity I was after.
Once I finished coloring in the scene, I added a sentiment from the 
I trimmed off 1/16″ on all four sides of my colored panel and adhered it to a white card base I created from Stamper’s Select White cardstock from Papertrey Ink. I thought about leaving the panel a full size, but I really like the border the white cardstock gives, it’s a nice little frame.
I find it odd that I rarely use more colors for full panels like this than just a simple image, but that tends to be how it is around here.
For this card, I’m once again focusing on the 
I created a top fold card base from Enchanted Evening cardstock from Papertrey Ink. This is one of my all time favorite cardstock colors, and I hoard it, always afraid I’m going to run out even though I have several packs of it. I die cut the lighter blue panel from Blue Breeze cardstock from My Favorite Things using the Stitched Snowflake Backdrop die from Lawn Fawn. The die cuts a full size panel for an A2 card, I trimmed mine down slightly to have the darker blue border showing around the edges.
I added a few extra white pieces of cardstock behind my colored panel to make it stand out a little more against the background. I like the dimension it adds.
I used a few words from the 
To finish the card I added a few sequins from the White Orchid sequin mix from Little Things from Lucy’s Cards. I also added a bit of black glaze pen to the penguin’s eyes, and then a white dot of Gelly Roll 05 on top once the black had dried. This makes the eyes stand out a little against the rest, and the shine looks great in real life. It’s hard to photograph, though, so you’ll just have to trust me.
Simple color palette for this one, these penguins don’t require a lot.
Meet 
I colored the image with Copics, trimmed my panel down and added a thin strip of Limeade Ice cardstock from Papertrey Ink above and below for a little bit of extra color and definition.
I used more Copics than I thought I would for this. I even used BG71, which is a color I’ve created myself.
This is 
I stamped a sentiment from the Scripty Bday stamp set from Mama Elephant using Fossilized Amber Distress Oxide ink, then trimmed my panel down slightly and mounted it using foam tape onto a top fold card base I created from Green Parakeet cardstock from Papertrey Ink.
I finished the card by adhering some sequins and a gem from the Seashore mix from Little Things from Lucy’s Cards.
Similar color palette to yesterday’s card, but I colored this dragon weeks ago and had forgotten him when I colored yesterday’s balloon image.
I colored the image with the colors she suggested, adding different colors only to bear. I trimmed my panel down slightly and stamped a sentiment from the Mini Messages stamp set from Mama Elephant using Sour Apple ink from My Favorite Things.
I created my card base from Classic Kraft cardstock from Papertrey Ink. I trimmed a piece of patterned paper from the Party Time 6×6″ paper pad from My Favorite Things down to a strip, and it had just the right colors for my card. I put four layers of white cardstock scraps behind it for dimension, and adhered it to my card. I did the same thing with my colored piece, adhering it to the card left of center, before using the Seashore mix of embellishments from Little Things from Lucy’s Cards to finish off the card.
This color palette makes me happy!
I printed the image in the center of a quarter piece of A4 X-Press It blending card, before coloring it with my Copics. I’ve never colored waves like this before, so I felt like I was in deep water.
I’ve found, however, that the best thing to do is to just jump in. It’s just paper and ink, and not the end of the world if it’s not perfect.
I trimmed my panel down, adhered it to a top fold card base I created from After Midnight cardstock from My Favorite Things and printed a punny sentiment that I put an additional four layers of cardstock behind for dimension, before finishing off with a few raindrops from Little Things from Lucy’s Cards. Super simple.
That little bit of dimension is everything on a simple card like this. Oh, and the raindrops too, I thought they fit well with the aquatic theme.
Lots and lots of blues for this!
Papirmølla 