Hi, crafty friends. I thought I’d share a gift tag today, featuring this adorable penguin from Lili of the Valley. If you know me, you know I can’t resist a penguin, and the Lili of the Valley penguins are soooo darn cute!!
I colored him with Copics and fussy cut him leaving a white trim around the edges. This particular image would be easy to cut up against the lines, but the wispy lines so characteristic of Lili of the Valley images would be lost, so I opted for the white border. I put black glaze pen in his eyes for shine, and then a dot of white using a 05 Gelly Roll, and put him aside while I worked on the rest of my tag.
I used a die from the Stitched Traditional Tag STAX die set from My Favorite Things to die cut from Classic Kraft cardstock from Papertrey Ink. I sprinkled Chunky White embossing enamel from Stampendous on top and melted it from behind for a snowy background look.
I used the Silhouette Snow Trees die set from Mama Elephant to die cut trees from Stamper’s Select White cardstock from Papertrey Ink, before I added some snowy texture to them using a Snow Pen from Rayher.
I stamped and white heat embossed Just for you from the Christmas Greetings stamp set from Lili of the Valley onto a piece of Amarena Cherry cardstock from My Favorite Things, before using a banner die in the Everyday Gift Box die set from My Favorite Things to turn it into a nice strip. I added a couple of layers of cardstock behind it for dimension and adhered it to the top right of my tag.
I used some ribbon and twine from my stash, as well as a charm, to finish off the front of this tag. The ribbon, banner and the penguin’s earmuffs create a visual triangle of red elements on this otherwise very neutral tag.
I die cut the same tag from white cardstock to use on the back. I added a couple of kraft colored branches that I die cut with the Pine Branches die set from Craft Emotions, as well as a to/from from the Tag Builder Blueprints 6 die set from My Favorite Things.
Lots of colors for this little penguin.
I colored the strawberries and fussy cut them right up against the black lines. I put them aside while I worked on the rest of my card. I created a top fold landscape A2 card from Stamper’s Select White cardstock from Papertrey Ink, used the Number Jumble background stamp from My Favorite Things to stamp on the front with VersaMark ink, then heat embossed using Iridescent Sparkle embossing powder from Judikins. I ink blended on top of the embossing in the center using Grass Field and Limeade inks from Altenew, as well as Squeezed Lemonade Distress Ink from Ranger.
Into a separate panel of white cardstock, I die cut the letters SWEET using the Impact Alphabet dies from My Favorite Things. I stamped a sentiment from the Scripty Bday stamp set from Mama Elephant below using Wild Cherry ink from My Favorite Things. I cut the panel down slightly, added two more layers of cardstock behind it for dimension and adhered it to the card front. I adhered one of the strawberries using liquid glue, popping the other one up using foam tape for dimension, before finishing off the card with a few bubbles from the Festivities mix from Little Things from Lucy’s Cards.
You wouldn’t think I’d use this many colors on images this small, but that’s kind of what I do.
I knew I wanted lots of green on this card, and as soon I was done coloring skin, hair and the ground, I grabbed a few green combos and colored in all the elves. I hit a bit of a snag when I got to Mrs. Claus’ dress, because I felt like there were no good color options. Grey would have been boring, brown would have been sad, red wouldn’t work with the amount of green I had and I felt a little lost, to be honest. Color buddy Liz to the rescue. She suggested the RV90s, and they worked beautifully. I’ve combined RV90s with green plenty of times in the past, but usually for florals, and I have to admit it’s been a while, so it was fun to use an old classic again.
Once the coloring was complete, I used the largest die in the A2 Double Stitched Rectangle STAX die set from My Favorite Things to create a nice detailed edge around my panel and adhered it to a top fold card base I created from Autumn Rose cardstock from Papertrey Ink. I used most of a mini doily from Doodlebug in the top right corner of the card for a little bit of soft texture, and added a small scrap of the same doily in the lower left corner for a little bit of balance. I used a tag die from the Everyday Gift Box die set from My Favorite Things to create my tag, and stamped and white heat embossed a sentiment from the Mini messages stamp set from Mama Elephant in the center of it. I tied some Green Apple Divine twine into a bow and mounted the tag using a couple of foam squares before finishing off the card with a few gems from Crafty Meraki. These are the Green Illusion Sparkle and they change color when you tilt them in the light. They appear green and somehow shift to a pink/purple tone, they’re really cool, and the colors worked perfectly for this card.
Lots of green for this one. I used four different green combos to color in the elves so they wouldn’t all look the same. I also used RV97, a color I’ve created myself, for the dress on Mrs. Claus.
I colored the characters with Copics, fussy cut them leaving a white border, then added black glaze to their eyes and then a white dot on top with a Gelly Roll 05. Rudolph got special treatment with a little bit of Glossy Accents on his nose for additional shine.
I used the Slim Card Basics die set from Mama Elephant to create my window panel. I die cut one from Blueberry Sky cardstock from Papertrey Ink and four white ones that I adhered behind it for dimension. I die cut the bigger scalloped rectangle in the Slim Card Basics set from Spring Rain cardstock, also from Papertrey Ink, and adhered it to a white card base.
I used the Silhouette Snow Trees die set from Mama Elephant to create white trees to go into the window openings behind my characters.
I stamped a sentiment from the 
I finished off the card with a few pearls from the Glossy Porcelain mix from Little Things from Lucy’s Cards.
I love dimension on my cards, and this one certainly has that.
Between the shine on Rudolph’s nose, all the blue and all the dimension, this card makes me happy. I just wish it was easier to photograph slimline cards.
I used way too many Copics for these three.
The design of these snowmen peeking out from behind something offers so many possibilities for fun card designs. For my previous card using one of these, I created a tri fold card with the snowman peeking out behind one of the flaps. This time, I have a snowman sticking out above the top of the card.
I colored my snowman with Copics, cut away everything below the line in the image and adhered him to the top of a quarter sheet of Stamper’s Select White cardstock from Papertrey Ink, before cutting around him.
I adhered my panel to a top fold white note card I created from Stamper’s Select White and cut off the bottom of the card, so that it’s 5 1/2″ tall including the snowman.
I glued on white snowflakes all across the front. I used the Snowflake Confetti Fancy die from Hero Arts and die CR1335 from Marianne Design to create the snowflakes. I like the white on white look. This adds a tiny bit of dimension and interest to the background.
I then used the Big Happy Holidays die from Mama Elephant to die cut five times from Blue Yonder cardstock from My Favorite Things, before stacking them and adhering my chunky die cut in the center of the card.
I stamped and white heat embossed Let’s be jolly! onto a strip of Enchanted Evening cardstock from Papertrey Ink. The sentiment is from the 
Small image, but as usual, I went overboard when coloring the snow, so there are quite a few Copics used anyway.
Meet 
I paired them with sentiments from the 
There are some differences between these. Kale is stamped and colored on the tag, while Flo is fussy cut and popped up. I used similar techniques for the background, but kept a lot of the same elements across both tags.
For Kale, I masked him off and ink blended around him using Coral Bliss and Pink Pearl inks from Altenew, as well as Scattered Straw Distress ink. I used the largest die in the Stitched Traditional Tag STAX set from My Favorite Things to turn him into a tag and then used the Falling Snow stencil from Simon Says Stamp with Light & Fluffy Modeling Paste from The Crafter’s Workshop to create snow coming down. I used Snowfall Grit-Paste from Ranger at the bottom of the tag and sprinkled on Rock Candy distress glitter before the paste dried. I then added a snowflake charm and some ribbon at the top of the tag and tied it together with Cotton Candy twine from Whisker Graphics.
On the back of the tag I did soft ink blending using the same colors and stamped a to/from stamp from the B06 stamp set from Norsk Stempelblad AS using Coral Bliss ink from Altenew.
Not a lot of colors used for this adorable bunny.
I used the same tag die, stencil, paste and inks for blending on this tag, but decided to add a little extra. I die cut the Silhouette Snow Trees from Mama Elephant from Stamper’s Select White cardstock from Papertrey Ink, and on the trees I added Grit-Paste and Rock Candy Distress Glitter.
I let the trees dry, used liquid glue to adhere them to the tag and added Flo on top using foam tape.
I also used foam tape on the back of the speech bubble and used ribbon, a snowflake charm and some twine at the top for this one too.
Another stamp from the B06 stamp set from Norsk Stempelblad AS on the back of this one.
I used very bright colors for Flo.
I was planning on coloring this in green with a soft pink. I knew which greens I wanted use, but referred to my Copic color chart for the pink. My color chart is old and Copics fade with time, so the soft pink on my color chart wasn’t as soft in real life once I started coloring. I should color in a new chart, but I LOVE the hot pink with the green, so it all worked out.
This stamp is what you see on the right. The tip of her hat goes a little further to the right, but I wanted a more dynamic design with her coming in from the edge, so I chopped it off. I copied one of the baubles in her hands and put it on the left of the panel before printing, I thought it added a little bit of extra interest.
Isn’t she cute carrying those baubles? I love that they’re so big she has to use her forehead to balance them, because her arms just aren’t long enough to carry them on their own.
I knew I wanted to use this Scripty merry die from Mama Elephant. I tried a pink one and a green one and the green just worked better. I didn’t have any green cardstock that matched my coloring, so I used the colors I’d used on the image to create a piece of green cardstock I could die cut from, which I adhered on top of four white ones that I also die cut. I used the same technique for the base and created an ombré effect going from dark at the base to lighter at the top.
Using the Scripty Xmas stamp set from Mama Elephant, I stamped the word Christmas. The sentiment actually says merry Christmas, but I wanted to use the die cut merry, so I masked off the stamp version and stamped using Picked Raspberry Distress Ink, then stamped again using Worn Lipstick Distress Ink. I didn’t have a pink in that matched my coloring, but these two created the perfect blend.
I mounted my panel onto the card front using foam tape, adhered the stacked merry die cut to nestle in perfectly with the stamped part of the sentiment and finished off with sequins and confetti from the Starry Night mix from Little Things from Lucy’s Cards.
I love the dimension from the popped up panel and the stacked merry, as well as the ombre effect on the base and the die cut. The addition of the pink bauble on the ground gives the card a little bit of balance, not everything is happening on the right hand side of the card.
Simple, but fun color palette for this one.
My original plan was to color in their accessories in a peachy pink color and a dark green combo that I love for my Christmas cards. There’s usually a lot of detail to the Lili of the Valley accessories (stripes and dots), making it easy for images to look messy if you choose too many colors. I tend to opt for a lighter and darker version of the same color, which makes it better for the eyes. Once I’d done the peachy pink, I went in with the lighter of the greens, because I didn’t know how dark I wanted it. When the light green was in place, I realized I really liked the light color with the pink, so I decided not to add too much of the darker greens.
Once the coloring was complete, I used the largest die in the Wonky Stitched Rectangle STAX set from My Favorite Things to turn it into a panel with a fun faux stitch edge. I then used Winter Lake, Icy Water and Polar Bear inks from Altenew to ink blend a soft sky from the top, before sprinkling on Chunky White embossing enamel from Stampendous and melting the granules from the back of the paper with my heat gun.
I adhered the panel to a top fold card base I created from Berry Sorbet cardstock from Papertrey Ink. From Grapefruit cardstock from Condord & 9th, I die cut the oh so merry from The Penguin’s Waddle die set from Mama Elephant. I cut three and ink blended on the bottom using Berry Sorbet ink from Papertrey Ink, before stacking them together for a dimensional look and adhering them to the card. I finished the card with a few Coral Heart droplets from Little Things from Lucy’s Cards.
I realize now that the green mitten probably belongs to the snowman on the far left, which means I should have colored it pink. Oh well, next time. The faux stitching, the snow and the ink blend on the letters add a bit of texture and detail to the card without adding bulk. Of course, I love my dimension, so I layered up the die cuts and added the heart droplets, but this card is still fairly mail friendly, I’d say.
The cardstock from Concord & 9th, which is what I used for my stacked sentiment, is not a very thick cardstock, so it’s great to use if you don’t want too much dimension on your cards. I just really wanted that color, which is why I chose it, but it also die cuts really well.
Last, but not least, my color palette. I still go overboard when I color snow, I have a feeling that won’t ever change.
I colored the image and fussy cut it right up against the black lines. When you do, you lose the cute little extra lines on the outside that is part of Rachelle’s signature, which is a bit of a shame, but for the card design I had planned, it was a necessary sacrifice. I could have kept a little white trim (and thus, the wispy lines) around the image, but I feel that would have made the image less of an integrated piece of the overall design, so I went with the close cut.
Onto the card base, I ink blended Icy Water and Winter Lake inks from Altenew to create a soft blue sky. I die cut the Winter Forest cover die from Mama Elephant from Heavyweight vellum from My Favorite Things and adhered it on top. Using the same die, I also die cut the background from a couple of colors of gray cardstock. I used Mushroom from Concord & 9th and Soft Stone from Papertrey Ink and adhered the little gray notches into the openings of my vellum trees. On parts of the lighter ones, I ink blended with Charcoal ink from Hero Arts for a little variation in my grays.
I adhered my little scene on top of the vellum trees. I glued it flat down on the edges and used 2 mm foam squares near the top of the image for some dimension. I used a black glaze pen to add some shine to their eyes, and added a white dot on top once the black was dry using a Gelly Roll 05.
I die cut the Winter Forest cover die one final time, this time from white cardstock. I cut away the trees, but kept the frame and slope near the bottom and stamped a sentiment from the Together stamp set from Purple Onion Designs using Gravel Gray ink from My Favorite Things.
This image is so sweet and can be used for a variety of occasions. Rachelle’s images always have such a cosy vibe, and this one fits perfectly with all the other images she’s illustrated.
I see I’ve forgotten to add the greens I used in my Copic graphic. They were YG17, YG03, YG01 and G40.
I had to go for my traditional Christmas colors for this one with blue, brown and grey, it’s such a good combo. I made all the lights the same color. I know some people prefer the differently colored lights, but as a Scandinavian minimalist, my color palette for Christmas is very toned down, including my Christmas lights, which are all white.
Once I’d colored my image, I used the largest die in the Stitched Rectangles STAX 2 set from My Favorite Things to create a faux stitch border around my panel. I then took the Plaid builder stencil set from My Favorite Things and ink blended using Blue Yonder ink from My Favorite Things in the top right corner with the stencil with the wide stripes. On top of the stencil with the smaller stripes, I used Light & Fluffy Modeling Paste from The Crafter’s Workshop for a little bit of added dimension and interest to the background.
I adhered my panel to an A2 top fold card base I created from Enchanted Evening cardstock from Papertrey Ink. Using the scripty wishes die from Mama Elephant, I die cut three layers of white and one blue on top for a stacked look and adhered it on top of my stenciled background. I also stamped and white heat embossed a couple of sentiments from the Holiday messages stamp set from Mama Elephant to add to the wishes to make my sentiment complete. I cut them down to strips and added a few layers of cardstock behind each of them for dimension, before finishing off the card with a few sequins from the Starry Night mix from Little Things from Lucy’s Cards, as well as Glossy Accents for the lightbulbs.
I love the glow and shine from the lightbulbs.
Fairly simple color palette for this one.
Papirmølla 