Hi, crafty friends. Today’s the last day to take advantage of the 30% bundled discount offer for the new Charmed by the Sea release from Purple Onion Designs. The design team and guest designers have shared lots of amazing cards over the last two weeks featuring stamps from this release, and if you haven’t purchased this collection yet, I have another card for you today that I’m hoping will inspire you that little bit more.
Meet Slumber. This little mouse taking a nap in a hammock tied to palm trees won me over as soon as I saw it. Can you imagine relaxing by the ocean, listening to the sound of the waves rushing to shore? Heaven! I stamped and masked the surf board from the beach accessories set, the crab and the bottle from the seaside accessories set, then stamped Slumber, did more masking, then added the shoreline background, all using Extreme Black ink from My Favorite Things. With the masks still in place, I stamped the sunrise sunset background using Fadeout ink from Inkon3 for a soft, no line look.
Whenever I color scenes like this, I always start with the background elements. For this card, I started with the sky and sun, then colored the ocean, the sand and the palm trees, leaving the accessories and the mouse for last. These are the most colorful elements. I even opted to color the crab blue. I didn’t want it to be brown and not show up in the sand, so I decided a blue swimmer crab was a good fit for this scene. It stands out against the other elements in the foreground, but still works with the overall design, because there’s already lots of blue on the card with the ocean and sky. Three completely different blue combos, but they work together still. Also, the blue swimmer crab makes me want to move back to Australia, even though it’s winter in Australia at the moment, and soooo cold (at least winter’s cold in Adelaide, where I used to live)!
I’ve used the sunrise sunset background on more than half the cards I’ve made with this release, and I’ve tried to color it differently for each card. I love love love the versatility of this stamp, and never in a million years did I guess in advance that this would wind up being my favorite stamp of them all, but there you go. It’s just THAT good.
To finish off the card, I stamped a sentiment from the coordinating Seaside sentiment set using Classic Kraft ink from Papertrey Ink, and I also used a white Sharpie to add dots to the sand to mimic foam.
Lots of colors used for this one, and I realize I’ve even left out a few in my graphic. I used W3, W1 and W00 for the mouse, in addition to R21 and R000 for his cheek and ears.
This time I’m focusing on 
I colored the image with Copics, then used the largest die in the Blueprints 27 die set from My Favorite Things to turn it into a rectangle with faux stitching and a scalloped edge, just for something different from my usual faux stitch rectangles. I die cut another piece from white cardstock to put on the inside of the card.
Before adhering my panel, I sprinkled on Chunky White embossing enamel from Stampendous, and melted the granules from the back of the panel. I also used a black glaze pen from Sakura to create a tiny bit of dimension and shine to the penguin’s eyes. I adhered the panel directly to a top fold card base I created from After Midnight cardstock from My Favorite Things, which is a nice dark blue color.
From the same color cardstock, I die cut God jul four times using a die from Papirdesign. I stacked the layers and adhered it to the left of the image, before finishing off the card with a few hearts from the Festivities mix from Little Things from Lucy’s Cards.
This is a fairly flat card for me. Other than the sentiment and the white hearts, there’s nothing that adds a lot of dimension. I considered mounting the panel on foam tape, but in the end decided against it. The sentiment and the hearts still pop and add interest, as does the snow, which has a bit of texture to it.
I used mostly blue Copics for this card. Not really a surprise, huh?
This time, I made a birthday card. I stamped and masked 
I had the scene all figured out, but struggled with the colors for this one. I’m usually confident in my color choices, but had a hard time with this card. I didn’t want to repeat the color combinations I’d used for the cards I’d already made using stamps from this release, and the combo I tried just didn’t work with the bright aqua. The door, windows and the trim of the beach house all have so many layers of different colors, and the end result is a mottled, rusty look. The rusty look, while not what I was going for, is cool, and I leaned into it by coloring one of the birds in the same color, as well as Iris’ skirt.
The end result is more of a fall vibe than a summer feel, but some people still go to the beach late in the season, and little Iris looks like she’s running away, so that part at least feels appropriate.
To finish off the card I stamped a sentiment from the coordinating 
Fairly limited color palette, actually, considering how many colors I tried for the beach house trim.
I printed my image so it would fit a mini slimline card nicely, and didn’t feel like choosing colors, so I asked my color buddy Liz for suggestions. She really wanted to challenge me and said “red (not E), green (not BG) and gold”. She knows I don’t like red and green together, she knows I use the Es to create red on my Christmas cards and she knows I use BG colors or greys in combination with those Es. It’s kind of scary how well she knows what I like and use. I admit I was a little reluctant to try this at first, but I always run with her suggestions anyway, and I think it turned out okay (except for the huuuuge white dots on the green scarf).
Once I finished my coloring, I stamped and white heat embossed a sentiment from the Christmas greetings stamp set from Lili of the Valley, white heat embossed a few details in the image, then die cut it using partial die cutting and the largest die in the Slimline Double Stitched Rectangle STAX die set from My Favorite Things. I added a couple of layers of white cardstock behind the colored panel and mounted it all to a card base I created from Amarena Cherry cardstock from My Favorite Things. The finished card measures 6 3/8 x 3 1/2″.
No Es. And even though I used BG99 in my green combo, it still reads green and not BG. BG99 is great to use for dark green.
I printed the image fairly large and chose a summery color palette of hot pink, apple green and bright yellow. I colored the image with Copics and used the largest die in the Additional A2 Layers die set from Waffle Flower to turn it into a nice rectangular panel. I put the panel in my MISTI, and used the A06 stamp set from Norsk Stempelblad AS to stamp sentiments on the plain candles. I used Jalapeño Popper ink from My Favorite Things for the green candles, Raspberry Fizz ink from Papertrey Ink for the pink candles and Spiced Marmalade distress ink from Ranger for the yellow candle, with a little bit of help from VersaMark to prevent the distress ink from beading up on the photopolymer.
Once all my stamping was done, I adhered the panel onto a black card base I created from True Black cardstock from Papertrey Ink. I also die cut a panel to go on the inside from Stamper’s Select White cardstock from Papertrey Ink for a place to write my personal greeting. I used my black Glaze pen from Sakura to create a little bit of shine to the eyes and the nose of the bear, and added sequins from the Seashore and Iced Sherbet mixes from Little Things from Lucy’s Cards for a finishing touch.
Simple color palette for this one 🙂
I actually decided to create a shaker card this time. I colored in the 
I put an adhesive sheet from Altenew on the back of a piece of heavyweight translucent vellum from My Favorite Things, before using the Leafy Cover die from Mama Elephant to die cut a frame to put on my card front. I cut off a couple of leaves where I thought they covered up too much of the image and adhered the rest directly onto the bottom of a large stamp storage pocket from Avery Elle. The storage pocket was just wide enough for my colored panel to fit when I turned it 90 degrees. I trimmed off a tiny bit of my panel (1/16″) so it would be less snug in the pocket, and cut off a couple of inches from the top of the pocket. This way I could put the panel inside the pocket, and there would only be one side of the pocket that needed to be sealed once my shaker bits were in place.
I adhered my shaker pocket to a top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink. I die cut the sentiment using the Celebrate die from My Favorite Things. I used Caribbean Sea cardstock from My Favorite Things for the top layer and a few layers from white cardstock behind it for dimension. I also stamped a sentiment from the Bitty Birthday Wishes stamp set from My Favorite Things onto white cardstock using Caribbean Sea ink, also from My Favorite Things, turned it into a strip and placed it directly underneath the die cut word. To finish the card, I adhered some sequins from the Seashore mix from Little Things from Lucy’s Cards, as well as from the Seaglass mix from Simon Says Stamp. These two mixes work really well together, and they’re also what I used to fill my shaker.
Speaking of, here they are. Full shaker cards are fun, and I’d say they’re a lot easier to create than regular shaker cards, where you need to create dimension for the shaker bits to shake around.
The storage pocket works so well as a shaker pouch, and because of it, it gives everything a bit of a lift off the card. It looks like the vellum and the die cut sentiment both float on top, even though they’re both adhered directly to the pocket.
I created a white card base from Stamper’s Select White cardstock from Papertrey Ink, and on the left side of the card, between the center and the bottom, I placed a circle I die cut from the Watercolor Wishes paper pack from Lawn Fawn. I cut off the piece of the circle the left of the fold, I actually created a side fold card this time. I die cut a leaf cluster from heavyweight translucent vellum from My Favorite Things using a die from Kort & Godt, and I also die cut for you from the Sweet Sentiments die set from Altenew from Berry Sorbet cardstock from Papertrey Ink. I stacked four die cuts for each of the words, so they’d stand out on my card. I put foam tape on the back of my colored vase, added the vellum behind it and adhered it to my die cut patterned paper circle. The vellum leaves are only adhered to the card behind the vase, the rest is floating. I added my die cut sentiment and finished off the card by adding Nuvo Jewel Drops in the Limoncello color to the yellow berries in my vase.
Super simple color palette for this one.
I used a banner die with faux stitching to create a shaped card. This banner die is about 4″ wide, making it the perfect size for a decent size card. I used partial die cutting to create the card base, but die cut a separate piece that I used for my ink blending, which I then adhered to the card base once finished.
I used the Big Balloon stencil set from My Favorite Things to create my balloons, and used Distress Inks for my ink blending. Faded Jeans, Mermaid Lagoon and Salty Ocean for the blue balloon, Picked Raspberry for the pink balloon and Mustard Seed and Squeezed Lemonade for the yellow balloon. Where they overlap, they create new colors, which is half the fun of ink blending, right? With the balloon stencil still in place, I added the Falling Stars stencil from Simon Says Stamp on top and ink blended white stars onto the balloons using Fresh Snow hybrid ink from Papertrey Ink.
I stamped a sentiment onto the front using Obsidian ink from Altenew and added a stacked die cut HURRA above it. I layered six black die cuts, before adding this glitter one on top and finished off the card with a few black pearls.
Aren’t these guys cute? The image is called 
Using the Hooray Script die from Mama Elephant, I die cut the main sentiment from the same color cardstock. I stacked four layers for a dimensional look and stamped a sub sentiment from the Itty Bitty Birthday stamp set from My Favorite Things onto Bright Buttercup cardstock from Papertrey Ink using Obsidian ink from Altenew. To finish off the card I added a few sequins from the Seaglass mix from Simon Says Stamp, as well as a dot of black glaze pen to their eyes.
A bit of a different color palette for me. Years and years ago, I used the RV90 family a lot, I rarely do anymore. It’s a nice one, though, so I don’t know why I stopped using it. Maybe I should use it more often again.
Kort & Godt Die 335 is a die set with two leaves. One is an open outline, the other closed, and I actually used both for this card. I die cut the open one a few times from Heavyweight Translucent vellum from My Favorite Things, and nestled them in between the solid colored ones, which are (in order from the top going clockwise) Papertrey Ink (PTI) Simply Chartreuse, PTI Aqua Mist, PTI Hawaiian Shores, Simon Says Stamp Island Blue, PTI Amethyst Allure, PTI Raspberry Fizz, PTI Hibiscus Burst, Concord & 9th Poppy, PTI Orange Zest, PTI Summer Sunrise, PTI Harvest Gold, PTI Limeade Ice.
I lightly traced a circle die onto a white cardstock panel that I needed to adhere my wreath to. I only glued down the end of the stem for each of the leaf die cuts and did my best to arrange them evenly around the circle, with the vellum pieces after every third colored leaf.
Using foam tape, I adhered the white panel with my wreath onto a card base I created from Soft Stone cardstock from Papertrey Ink for a neutral on neutral look.
Using Kort & Godt DIE 244, I die cut the word klem (translation: hug) from gold cardstock (Gold Shine cardstock from My Favorite Things), as well as four additional ones from white cardstock to stack behind the gold for added strength and dimension.
Papirmølla 