Hi, crafty friends. I’m sharing a sweet birthday card today, featuring a cute duck from the Streamside Studios A Ducky Day stamp set. This set exists both as a digital set and a photopolymer set.
I’ve had this duck colored for quite a while, but sometimes, life just gets busy. I fussy cut him, leaving a white border around the edge and did the same with the butterflies and the balloon from the same stamp set. I ink blended clouds on a piece of Stamper’s Select White cardstock from Papertrey Ink using Harbor ink from Concord & 9th and the Rolling Clouds stencil from My Favorite Things. I die cut my panel using the largest die in the Blueprints 27 die set, also from MFT.
I covered my white card base with a piece of light pink glitter cardstock from Kort & Godt. I added a few layers of cardstock behind my die cut panel to give it a little lift and adhered it in the center, before placing stacked die cut words on top. I used the Hipp hurra die set from Kort & Godt to create these, cutting four of each words from white cardstock and the top from the same pink glitter cardstock I used to cover the front of the card. I threaded black sewing thread through the balloon and the wing of the duck. I added a bow to the balloon using the same thread and mounted both the duck and the balloon onto the card using foam tape. I adhered the butterflies above the balloon, before heat embossing a sentiment from the A06 stamp set from Norsk Stempelblad AS. I cut it down to a strip, put a few additional layers of cardstock on the back of it and adhered it below my die cut sentiment, before finishing off with a few gems from the Rapunzel mix from Streamside Studios.
Yellows and pink and nothing else for this one.
I used the panda peeking out from behind a fence or a wall or whatever you’d like it to be, as well as the bamboo. I used the bamboo multiple times to create a “wall” of bamboo behind my panda. I created mirrored versions so they wouldn’t all look the same, and I made sure to make them different heights. I erased the bottom of the bamboo so they’d end at the horizontal lines going out from the paws of the panda. Once I printed my image, I used a 0.35 Copic multiliner to extend the horizontal lines, making it look like a wall. I colored in my image, making sure to use a couple of green combos for the bamboo leaves for a little bit of variety.
I used the largest die in the A2 Stitched Rectangle STAX Set 2 die set from My Favorite Things to create a nice faux stitch border around the edge, before adhering it to a black card base I created from True Black cardstock from Papertrey Ink. With my pink wall, I felt like I had to make a baby card, but I didn’t want to, so I opted for the black. I used the Sweet Sentiments die set from Altenew to die cut my thanks word. I stacked three black die cuts for dimension and die cut the shadow from Stamper’s Select White cardstock, also from Papertrey Ink. I rarely use shadow dies, but I knew I was going to white heat emboss the rest of the sentiment, so I figured it would work. I also tend to pop up my sentiments, but actually adhered this one flat down onto the card. It still has dimension because of the stacking. I stamped and white heat embossed a sentiment from the Bitty Thanks & Gratitude stamp set from My Favorite Things, cut it down to a strip and adhered it on top of my stacked die cut. I put an extra strip behind it for a little bit of strength. I also added a black glaze pen to the eyes and nose, before going in with a white Gelly Roll 05 on top once the black was dry. This adds some shine to my little panda. I decided not to add any embellishments to this card, which is really rare for me.
Not a ton of colors used for this one. I used E81 and the blender with the tip to tip technique to color the “white” fur.
I colored my raccoon with Copics, deciding to go with a triadic color combo of primary colors for his paints and accessories. I obviously used green for the grass, but the rest of this is all red, blue and yellow. I used the second largest die in the Watercolor Rectangle STAX die set from My Favorite Things to give it a playful, loose look on the edges, then used the Say Anything stencil, also from My Favorite Things, to ink blend a speech bubble using Harvest Gold ink from Papertrey Ink.
In the speech bubble, I stamped a couple of sentiments from the Mini Messages & More stamp set from My Favorite Things, using Obsidian ink from Altenew. I took the various ink splatter stamps in the same stamp set and stamped in various colors across my panel, to amp up the crafty feel of the card. I used Watermelon, Harbor and Dove inks from Concord & 9th, as well as more of the Papertrey Ink Harvest Gold color that I used for the ink blending. Onto a card base I created from Cement Gray cardstock from My Favorite Things, I added some strips of cardstock to break the lines in my design. I used Watermelon cardstock from Concord & 9th, Blue Breeze from My Favorite Things and Harvest Gold from Papertrey Ink. I added my panel in the center using foam tape, and finished off with a few sequins from the Starry Night mix from Little Things from Lucy’s Cards. I actually also used a black glaze pen to create shine and a tiny bit of dimension to the eyes. On the raccoon, I also used a dot of white Gelly Roll 05 to each of the eyes once the black was dry.
I used a fairly small amount of Copics for this one.
I stamped and masked 
Once all my coloring was complete, I stamped on top of my critters, this time using Obsidian ink from Altenew. This is a very crisp pigment ink, and it makes the critters really stand out, but it’s not Copic friendly, so all the coloring needs to be complete when doing this. To finish off, I stamped a sentiment from 
Lots of Copics for this one.
I knew I wanted a large sentiment for this card, so I printed the bee pretty much top center of a quarter sheet of X-Press It blending card, which is my preferred cardstock for Copic coloring. I’ve been using it since 2012, and in my mind, there’s no better cardstock for Copics, so it’s pretty much all I use. I colored the image with my Copics and cut off a little bit on each side of the panel before adhering it to a top fold card base I created from Summer Splash cardstock from My Favorite Things.
I die cut HAPPY from the Big Happy Holidays die from Mama Elephant three times from Sour Apple cardstock from My Favorite Things, stacked them for a dimensional look and adhered the stacked die cut right beneath the bee’s feet. Using the Parker alphabet die set from Memory Box, I die cut the letters to spell bee-day, using an exclamation point that I trimmed down a little to create a hyphen. This word is actually multi-colored. That was not my intention, but I wasn’t happy with the color I chose initially, which was Bright Buttercup from Papertrey Ink. It’s a great color, but it wasn’t the right yellow to match my colored bee. On top of three die cuts of that, I added a layer of Honey Nut cardstock, also from Papertrey Ink. It matched my bee, but it was a little too brown for my taste, and my card felt sad. I didn’t want a sad birthday card, so I topped it with a layer of Summer Splash cardstock from My Favorite Things, which is what I used for the card base. I was much happier with this, and it matches the wings nicely.
To finish off the card I added a few sequins from the Starry Night mix from Little Things from Lucy’s Cards. Here you can also see the multi-colored letters in the word bee-day, which adds another layer of interest to this fairly simple card.
Simple color palette for this one.
I created a fun water scene with 
I stamped a sentiment from the coordinating 
Considering I colored the entire card front on this card, I don’t think I used too many markers.
I love the super sized sentiment dies from My Favorite Things. They have several in this style, and they’re great for all sorts of techniques. Today I used the negative of the Big Birthday Wishes die, cut into X-Press It blending card. I normally use this paper for coloring only, but I wanted the white background to match the white trim on my die cut bears, which are colored on the same paper. I added foam tape to the back of my negative die cut for dimension, making sure to keep the counters so I could put them back in. I added a strip of solid colored cardstock from Concord & 9th behind each of the lines in the die cut. I used Honeysuckle at the bottom, Clementine in the center and Buttercup for the top. I then adhered everything to a card base I created from Blue Breeze cardstock from My Favorite Things.
I stamped the bears from the Bitty Bears stamp set from My Favorite Things and colored them in with Copics and used the coordinating dies to cut them out. I added three white die cuts behind each of the bears for dimension and placed them on the card. I didn’t want to cover up too much of the letters, so I made sure to create a wide border around the die cut words. I also wanted a chunky border around the white, so this card is quite large and measures about 5 1/4 x 6 1/2″.
At first, I wasn’t sure how to add dimension behind the small counters, especially on the triangle in the A, because it’s very very small, but I wound up putting foam tape behind some X-Press It, then die cut the letters I needed once more to get counters with dimension. It worked really well, so I’ll remember this trick in case I need to do something similar in the future.
Yellows, oranges and pinks, just like the strips of cardstock behind the letters.
I colored the image with Copics, fussy cut right up against the black lines and put the image aside while I worked on the rest of my card. I used the second largest die in the Watercolor Rectangle STAX die set from My Favorite Things to cut my white panel down with a fun border. I also used a small circle die to cut a hole behind where I wanted the image to go, as this is a pendulum card. The watermelon rocks back and forth when you tilt the card, which adds a fun element to an otherwise simple design. I stamped part of the sentiment from the 
I used a strip of acetate with a washer at one end to create my pendulum mechanism. On the other end of the acetate strip, I added a button. I lined up my acetate piece on the back of my white die cut panel so the button would go through the hole and adhered the image to the button using liquid glue. I put foam tape on the back of the panel, making sure to leave enough open space for the pendulum to swing freely, then adhered everything to a top fold note card I created from Fire Coral cardstock from My Favorite Things, which is the same color cardstock that I used for the die cut letters. To finish off the card, I added sequins from the Waterfall mix from Little Things from Lucy’s Cards, making sure to place the top ones so Flappy wouldn’t catch when he rocks. Of course, you can’t see him rock in still photos, but if you head to my post on 
Simple color palette for this one.
I started by choosing an image to be the focal point of my card. I ink smooshed Gravel Gray and Eiffel Tower inks from My Favorite Things onto the background to mimic the background in the photo. This adds a little bit of interest to the background without being too distracting. I also used the Kaleidoscope embossing folder from Simon Says Stamp on the card base for added texture.
I placed the image at an angle in the bottom left corner of the card and cut off the excess hanging off the side and the bottom. I decided to mount it on foam tape for a little more interest, then used pre printed stickers to add my sentiments. I love these things, they make adding sentiments soooo easy. I put foam squares on the back of these for even more lift off the card base – dimension is life, after all. I used black gems to frame the sentiments as a finishing touch.
Dimension really is life!
I die cut the word konfirmant and the individual letters for the recipient’s name in white cardstock and adhered them to a black envelope. The black and white ties in with the card nicely.
I stamped one of the images in the stamp set using black ink and used the coordinating layering stencils to color it in. It’s no secret I’m a fan of Copic coloring, but this was soooo much faster, and maybe it’s okay to cheat a little once in a while. I used the Dried Petals set of inks for the pink in the flowers and the Forest Trail set for the green. For the yellow I used Sunflower and Buttercup inks from Concord & 9th, as I don’t have yellow inks from Altenew.
I created a card base from Sno Cone cardstock from My Favorite Things and used the Angled Mosaic 3D embossing folder from Altenew to add some texture and interest. I mounted my flowers in the bottom center using foam tape, then added a black sentiment sticker strip from Kort & Godt with a couple of layers of cardstock behind it for a little bit of lift, before finishing off the card with Sparkle & Shine ombré glitter drops from Pinkfresh Studio.
Papirmølla 