Happy birthday

June 16, 2021June 16, 2021 ElinLeave a comment

Hi again! My second post for today, if you’re looking for some Mo Manning inspiration, you’ll find this morning’s post here. This one is a fairly clean and simple birthday card, featuring a cat from the Pawty Time stamp set from My Favorite Things.

I colored up this cute cat with my Copics back in September last year, so it’s definitely taken me a while to turn my colored piece into a card. I’d stamped the cat in My Favorite Things Extreme Black ink in the center of a 1/4 sheet of X-Press It blending card and colored it with Copics. I may have had plans for fussy cutting, but I took out one of my faux stitch rectangle dies from My Favorite Things and turned it into a rectangular panel instead.

I cut down a 6×6″ sheet of patterned paper from the Dots & Stripes Pastels paper pack from Sunny Studio and adhered it onto a top fold card base I made out of Summer Splash card stock from My Favorite Things. The colors match very nicely, and the polka dot paper goes really well with the dots on the balloon.

I adhered my colored panel in the center of the card using foam tape for a little bit of lift and dimension.

In the top left corner of my colored panel, I decided to put my remaining elements. I like putting things close together instead of spreading them out, I think the cards look cleaner and less cluttered this way. I adhered a mini paper doily from Doodlebug in the corner, and used that as a base for my other elements.

I’ve had this happy wood veneer from Studio Calico for years, and decided that it was time to use it. Using liquid glue (Gina K. connect, which is the only liquid glue I like), I added it directly onto the paper doily, with just a little bit of the h hanging off the edge for added visual interest. I stamped and white heat embossed the word birthday from the Birthday Wishes stamp set from Mama Elephant onto piece of Gravel Gray cardstock from My Favorite Things and used one of the Itty Bitty Strips dies from MFT to die cut it. I added a few more layers of gray cardstock behind it for dimension, so the strip sits flush with the veneer. To finish off the card I added three enamel dots from the Sea Shore pack from Altenew.

Very limited color palette for this one.

Wish BIG on your birthday

May 26, 2021May 26, 2021 ElinLeave a comment

Hi, there. Second blog post of the day. If you’re looking for a Mo Manning creation, it’s right here. This time I’ve got a bright, slimline birthday card to share, featuring lots of goodies from My Favorite Things. It’s no secret that I love their products, and I rarely make cards without at least using MFT dies.

I stamped the images from the Picture Perfect Party Animals stamp set using MFT Extreme Black ink, which is a hybrid ink that works well with Copics. I cut each of the squares right up against the lines and mounted them on foam tape onto a piece of Limelight card stock that I die cut using a die from the Slimline Starter die set. I adhered the green card stock directly to the white card base.

Using the Big Birthday Wishes die, I die cut the word wish four times from Tropical Teal card stock and stacked them for a little bit of dimension. I adhered the letters to the green card stock and mounted a sub sentiment on top using some 1/16″ foam tape from Gina K. That sub sentiment is part of a sentiment from the Pawty Time stamp set, and just for a little bit of a different look, I used Milk Chocolate card stock for that. To finish off the card, I added quite a few enamel dots from Papirdesign to pick up the orange from my coloring.

Normally, I’d have my Copic colors at the end of the post, but I colored these images for Kathy Racoosin’s 30 day coloring challenge last July, and don’t recall what colors I used.

Happy birthday monsters {Mo’s Digital Pencil}

May 26, 2021May 24, 2021 Elin2 Comments

Hi, everyone! I’ve got a simple, colorful, dimensional birthday card to share today, featuring some adorable monsters from Mo Manning. They’re from the Cupcake Monster set. It exists as a merged version, and a separated version, which is what I used today. I didn’t even use the big monster, just the smaller ones.

There are 7 small monsters in this stamp set – perfect for a rainbow. I actually colored all 7, the last little (red) monster’s on the inside of the card, you’ll have to trust me on that 🙂 Once I was done coloring, I fussy cut them all, leaving a thin white border on the outside edge of each. I usually prefer cutting right up against the line, but these are so small, and those candles so thin, that there was just no way to do it.

I used the Simply hexagons die from Pinkfresh Studio to create some hexagons from Soft Stone cardstock from Papertrey Ink. I love this soft grey for a neutral on neutral look. I adhered the hexagons in the center of a white top fold card base using foam tape.

I put the monsters on 1 mm foam squares, cutting the squares into little slivers to put behind their feet and the candles. These monsters really are tiny, but I wanted the dimension, so I think it was still worth the extra effort.

I stamped and heat embossed a sentiment from the Over under easy stamp set from Papertrey Ink onto Smokey Shadow cardstock, also from Papertrey Ink. I love the cardstock colors from PTI, they’re my favorite!! I cut the sentiment down to two strips and adhered them at wonky angles with foam tape, before finishing off the card with a few sparkling clear sequins from Pretty Pink Posh.

Lots of Copics for this one. That happens with rainbows 🙂

Birthday wishes {Streamside Studios}

May 11, 2021May 11, 2021 ElinLeave a comment

Hi, there. I have a super simple birthday card to share today, featuring the Turtley Awesome digital stamp set from Streamside Studios. This card is actually part of an Instagram hop, so if you head over to Instagram and hop along, you’re in with a chance to win some prizes. Who doesn’t like prizes, right?

I colored two of the tortoises (the other one’s on the inside of the card) and fussy cut both. I printed one of the watercolor splashes from Lili of the Valley at 50 % opacity straight onto the card base. I love the watercolor look, but hate getting inky fingers, and this way, there’s no drying time, and I can use my nice white cardstock and not have to rely on the more yellow watercolor paper.

Here you can see a little of the tortoise I glued to the inside of the card. On the front, I added a stacked wishes sentiment (die from Mama Elephant). It’s six die cuts thick for some real dimension.

I stamped and white heat embossed part of a birthday sentiment from a Simon Says Stamp/Concord and 9th Stamptember collaboration set onto a piece of Smokey Shadow card stock from Papertrey Ink, mounted it on foam tape and adhered it above the w.

To finish off the card, I added some sparkling clear sequins from Pretty Pink Posh. It’s a great mix of sequins in four different sizes, I really love using them on my cards.

One for the books {Purple Onion Designs}

May 9, 2021May 1, 2021 ElinLeave a comment

Hi, everyone! I have another card to share featuring the new spring release from Purple Onion Designs. This card is very different. First of all, it’s a slimline card, which I don’t make too many of (on account of them being difficult to photograph). Secondly, I only used 6 Copic markers for the entire card. I’ve dabbled with grayscale images in the past, but always with a pop of color somewhere. This one is all about those grays. Oh, and those fabulous new images, of course.

I stamped and masked George the raccoon on a piece of X-Press It blending card that I’d already die cut using the slimline starter die set from My Favorite Things. I stamped Room with a view so George is standing firmly on the balcony, then stamped the book store (minus the roof of the book store) below it and then the balcony railing directly over top of the raccoon once I’d removed the mask.

I colored the entire panel with my 6 chosen Copics, adhered the panel onto a card base I made from Stamper’s Select White card stock from Papertrey Ink.

Deciding to keep the grayscale going on the inside of the card, I stamped one of the sentiments in the “Around the Town” sentiment set using VersaMark ink on a piece of Steel Gray card stock from My Favorite Things, and heat embossed it in white, before adhering the sentiment to the inside of the card. Super simple.

The Ns and Ts are my favorite Copic grays. For this card, I went with the Ns.

Paint the town {Purple Onion Designs}

May 1, 2021May 1, 2021 Elin1 Comment

Hi, there. I have a card to share featuring stamps from the brand new “A Happy Little Place” collection from Purple Onion Designs, illustrated by the one and only Stacey Yacula.

As soon as I saw Polly the hedgehog with her cans of paint, I knew exactly what I wanted to do. She needed to paint a rainbow. I don’t really free hand draw much on my cards, but arches aren’t too daunting.

I stamped Polly and her paint cans using Extreme Black ink from My Favorite Things, before masking the paint cans and stamping some country flowers behind them. Using a mechanical pencil, I drew in faint lines for the rainbow, before masking the section that needed to be in front of the countryside scene on the horizon, and then stamping that in fadeout ink from Inkon3 for a no line look in the background. I wanted the focus to be on the hedgehog and rainbow.

I colored in the entire scene with my Copics. To be honest I probably spent more time on the rainbow than anything else. I only have five arches, but it was tricky enough to try to color five (the bands are very thin) without the curves getting too jagged, I don’t even want to think about how hard it would have been with seven.

At the end of the rainbow, I created a dripping edge with a puddle of paint on the grass. Isn’t Polly cute holding that paint can and brush?

I stamped a sentiment from the “Around the town” sentiment set onto my colored piece using VersaFine Onyx Black ink, holding my breath as I did so. I didn’t want to mess up my panel and have to start over at this point.

I used the largest die in the A2 Stitched Rectangles STAX 2 set from My Favorite Things to turn my colored piece into a finished panel, making sure the ink in the sentiment was dry before running it through my Gemini Jr. I added my panel onto a white card base with a top fold, and my card was complete.

Lots and lots of Copics. That happens with rainbows 🙂

Are you sure you’re a year older? {Mo’s Dream Team}

April 28, 2021April 25, 2021 ElinLeave a comment

Hi, there! It’s Wednesday again, and you know what that means. Time for another Mo Manning creation around here. This time, I’ve kind of gone back to my roots, but not really. It’s a layered card, which used to be the norm for me, but the image is fussy cut, which most certainly has never been my signature.

I received an order for a 50th birthday card for an electrician. The card needed to be “messy”, which is kind of difficult for me. My usual style is pared back and very simple, I just don’t have enough elements on my cards to be able to make a mess of any kind. Thus going back to my roots of using lots of patterned paper. I colored up Mr. Fixit in my favorite colors and fussy cut him.

I had to go looking for inspiration online. The last “old style” card I made was in June of last year, which means I’m rusty. I found a card I liked and used it as a guide to create this one, which is actually an A7 card (5×7″). I dug through my patterned papers, both 12×12″ sheets and scraps, and found a few from Papirdesign, Maja Design and a small scrap from My Mind’s Eye that I used to die cut the gears and numbers. I arranged all the elements on my card, some using foam tape and others adhered straight down, and wound up with this. I used old dies from Sizzix for the gears, forcing me to pull my BigShot out of retirement for a few minutes. Those dies are too thick for my Gemini Jr., which is the machine I use for nearly all my die cutting. The last time I used my BigShot was over two years ago, so there’s a reason it’s retired in the closet. I added a piece of Snip Art chipboard and a film strip piece from Tim Holtz for a little bit of added interest and something that wasn’t just made of paper.

On the inside, I adhered left over pieces of the gears, just to use it all, and stamped a sentiment from Norsk Stempelblad AS using Dark Indigo ink from Papertrey Ink. There’s plenty of room on the right for a personal message, this is a side fold card (another anomaly from me, I prefer top fold).

On the back of the card, I repeated a lot of the elements that I used on the front. The tag dies I used are from My Favorite Things, and I used my recently acquired personal stamp from Create a Smile on one of the die cut tags, stamped in Dark Indigo ink.

Not a lot of Copics used for this one, I mostly stuck to blues.

Birthday card galore {Hobbykunst}

April 26, 2021April 3, 2021 ElinLeave a comment

Hi, there! Remember the 4 bar birthday cards I shared a couple of weeks ago? Well, I have another batch today. Still using the Happy birthday collection from P13, still all 4 bar cards.

I’m starting with what’s probably the simplest one, certainly the cleanest one. I die cut a wonky grid from white card stock and adhered it directly to the card base, before adding the fussy cut bunny with foam tape.

I stamped and white heat embossed a sentiment from the Bitty Bears stamp set from My Favorite Things and popped it up using foam tape, before adding some clear crystals from Little Things from Lucy’s Cards in clusters to the background. I even fussy cut another, smaller bunny and glued him to the inside of the card, which you can sort of see in this photo.

This card looks a little bit busier, simply because I added some patterned paper to the background. Once again I adhered the fussy cut image using foam tape.

I white heat embossed a sentiment from the Pawty Time stamp set from My Favorite Things, added it with foam tape and finished off with a few clear crystals from Little Things from Lucy’s Cards.

This is probably the most involved of the cards, simply because I created a faux stitch rectangle from the patterned paper in the background, instead of just leaving it plain and letting it cover the entire card base.

I used a Papirdesign die to create the white die cut going across the center of the card, and added my fussy cut piece using foam tape. The sequins used for this card are from the White Orchid Sequin mix from Little Things from Lucy’s Cards.

An elephant with some balloons, ready to party is next up. I used part of a die cut to span across the card for a little texture in the background, before adding the elephant with foam tape.

The sentiment is from the Bitty Bears stamp set from My Favorite Things, and I added a few pearl white crystals from Pretty Pink Posh for a finishing touch.

Die cut patterned paper in the background for this one, with that faux stitching I love so much. Once again, lots of foam tape behind the image.

Sentiment from the Bitty Bears stamp set added using 1 mm foam squares, with a few Papirdesign enamel dots to finish.

You cake my day! {Rachelle Anne Miller Creative Studios}

April 25, 2021April 25, 2021 ElinLeave a comment

Hi, there! I have a simple card to share today, featuring the Birthday Cake image from Rachelle Anne Miller.

I colored up the image with Copics in super bright colors. I used a border die from Lawn Fawn to add faux stitching above and below the image, and put lots of foam tape on the back.

I used the quilted backdrop die (also from Lawn Fawn) to die cut from a piece of Raspberry Fizz card stock from Papertrey Ink. The piece I used wasn’t big enough to cover a regular size card front, so I adhered it to a white top fold card base and cut off the excess white, before adding my colored piece on top. The card measures around 5 1/8 x 4″. I added a few clusters of 2 mm and 3 mm pearls from Kort & Godt to the colored panel, a little bit of Lemon divine twine tied in a bow at the fold, and my card was finished. Super simple, right?

A nice little Copic selection.

Quick, simple birthday cards {Hobbykunst}

April 16, 2021April 3, 2021 ElinLeave a comment

Hi, everyone! I have a few cards to share today, mostly focusing on patterned paper from P13 and their Happy birthday collection. All the cards are 4 bar size, and they’re all pretty similar, using sheets 1-6 from the collection from P13. They number their patterned papers, they don’t name them.

My first card is the only landscape one. I covered the card base with that yellow patterned paper and added a white die cut on top. I fussy cut the boy with the present and mounted the image on foam tape, before adding a sentiment strip with additional pieces of foam tape for even more dimension. The sentiment is from the Pawty Time stamp set from My Favorite Things. I finished off the card with a few sequins from the White Orchid Sequin mix from Little Things from Lucy’s Cards.

Card number 2. Covered up the card base again, this time with a patterned paper that barely even has a pattern on it. It’s white with a dotted grid printed in yellow. I die cut the wonky square grid pattern from some of the red patterned paper and adhered it in the center of the card.

I mounted a fussy cut image onto foam tape in the center of the card, and a sentiment strip on top of that with even more foam. The sentiment is from Mathia, heat embossed in white on a piece of red pattened paper. I added a few Pearl White crystals from Pretty Pink Posh to finish the card.

This one is pretty similar to the last one. I die cut the wonky grid from yellow patterned paper, and adhered it directly to the card base on the left hand side of the card, before adding the fussy cut image with foam tape.

I stamped and white heat embossed a sentiment from the Bitty Bears stamp set from My Favorite Things and added it with foam tape on top of the image, before finishing off with some raindrops from the Crystal Collection from Little Things from Lucy’s Cards.

How festive is this elephant balancing an ice cream cone? I used the white patterned paper with the yellow dotted grid lines for this one as well as a die cut hole pattern that I tore at the egdes.

I adhered the fussy cut elephant using foam tape, and a sentiment strip using some 1 mm foam squares, before finishing off with a few sequins from the White Orchid Sequin mix from Little Things from Lucy’s Cards.

This last one also has the hole pattern with torn edges, I think it adds a little more playfulness and interest to these very simple cards. I adhered the fussy cut image with foam tape for this one too. I like that little bit of dimension. I even used my thick foam tape for the sentiment on this one, so this card is extra dimensional.

Heat embossed sentiment strip once again, and as with so many of the other cards, I used the Bitty Bears stamp set for that. Finished off with a few Pearl White crystals from Pretty Pink Posh.