Hi, crafty friends! Today I’m sharing a fun Christmas card. Yes, I’m still making holiday cards. It’s been a foggy day today, the fog is so thick I can barely see across the street, and the all white outside kind of matches a Christmas card making session, I think.
To me, this card is different. Not just because of the colors, but I usually create a panel from my coloring and go from there. For this card, I fussy cut the yeti from the Yeti Yeti Yeti stamp set from Streamside Studios, and built a scene and part of the sentiment from die cuts.
I created a top fold landscape cardbase from Stamper’s Select White cardstock from Papertrey Ink, die cut the Snowfall Background: Landscape die from Lawn Fawn out of Sno Cone cardstock from My Favorite Things and adhered the die cut panel to the cardbase. I die cut the Country Landscape die from Memory Box using more white cardstock, and put tiny pieced of yellow cardstock behind the window openings for a little pop of color.
I stamped the sentiment from the Holiday messages stamp set from Mama Elephant using Sno Cone ink from My Favorite Things right onto my die cut horizon piece, before adding three additional layers of cardstock behind it for dimension, and then adhering it to the card. Using the Connected die set from My Favorite Things, I die cut the letters to spell out OR NOT three times from white cardstock, stamped the letters from the coordinating stamp set in Sno Cone ink and adhered my three layers together for a stacked, dimensional look.
For the word YETI, I used the Impact Alphabet die set from MFT and die cut three layers of white cardstock and the top letters from X-Press It that I’d colored with Copics to match my yeti. I didn’t have the right shade of purple cardstock in my stash to match, so I created my own. The ombré effect is a nice bonus. I glued all my stacked die cut letters to the card, put three layers of cardstock behind the yeti’s head to add some stability and adhered the yeti to the card using liquid glue, before finishing off with a few snowflakes I die cut using the Snowflake Confetti fancy die from Hero Arts. I also glued a few snowflakes to my matching envelope, which is an envelope from MFT in the color Summer Splash. It goes really well with the Sno Cone color.

Simple color palette for my little yeti.
For this slightly larger than normal slimline card, I stamped the
I cut down my background so that it would fit on my cardbase, which I created from Sprout cardstock from Concord & 9th. I stamped a sentiment from the
It shows better in this photo that the dogs are slightly raised off the background. It adds a fun detail to an otherwise very simple card. This is the point where I’d normally share the Copics I used, but I seem to have misplaced my post-it note where I’d written it down. Things were kind of hectic before the holidays when I made this.
For my first card, I chose to feature this adorable image from Lee Holland. Last year, he asked his followers and fans what more we wanted of his dragons (he is known for his dragons, he has lots of different ones), and I suggested one hugging a penguin. He came through big time, and created this image, which I, of course, had to get. I colored it in noline, because I love the look, before sprinkling Chunky White embossing enamel on top and melting the granules from the back of the paper to create that wonderful snowy look.
I taped a square die inside a rectangle die from Waffle Flower and die cut the two dies four times from Stamper’s Select White cardstock from Papertrey Ink to create a chunky polaroid frame for my little fellas to fit into. By taping the two dies together, they won’t shift and the square opening will be in the same spot for all my diecut pieces. I stacked my diecuts and put the image behind my chunky frame, before adhering it all to a cardbase I created from Stormy Sea cardstock from Papertrey Ink. Using a die from Kort & Godt, I die cut the word klem three times from the same color cardstock. The die actually cuts the word juleklem (Christmas hug in Norwegian), but it’s so big the first part didn’t fit my card, so I just chose the latter half of the word. I stacked three together for dimension, adhered it at an angle to my card, and put a white heat embossed sub sentiment from Norsk Stempelblad AS below. This too, has additional layers of cardstock behind it for dimension. To finish off the card, I die cut a few white snowflakes using dies from Hero Arts and Marianne Design, and I stacked two of each snowflake on top of each other to make them stand out a bit.
Fairly simple color palette for this image.
Today I’m sharing a simple one, featuring
I stamped the image with Extreme Black ink from My Favorite Things onto X-Press It blending card, colored the image with Copics and fussy cut, leaving a thin, white border. I prefer cutting right up against the stamped lines when I fussy cut, but with the snowflake garland, that just wasn’t an option.
I used an oval die from Spellbinders to cut a window into a white cardstock panel. I then used the Snowflake Oval Frame embossing folder from Simon Says Stamp to create a little bit of texture to my plain white cardstock. This embossing folder has an oval in the center that doesn’t emboss (where you can stamp a sentiment), but I wanted a window for my card and cut out an oval before using the embossing folder.
I created a card base from Spring Rain cardstock from Papertrey Ink and stamped part of a sentiment from the
I put lots of foam tape on the back of the white cardstock with the dry embossed snowflakes and adhered that to my card, and then added foam tape behind my colored image and placed it in the center of the card.
Simple color palette for this card.
I colored the cat, tree and ground with my Copics, before deciding that I really wanted a dark, intense night sky. I stamped and fussy cut masks for both images, then did some free hand cutting of a snowbank at the back, before I went in with my Copic airbrush system and some dark blue colors to quickly create the sky.
I used the largest of the dies from the Slimline Double Stitched Rectangle STAX set from My Favorite Things to cut down the panel to fit on the front of my card, and stamped a sentiment from the
I sprinkled on chunky white embossing enamel from Stampendous, making sure no granules covered the sentiment or Hazel’s eye before melting the granules from the back of the panel. I adhered my snowy scene to a card base I created from Stamper’s Select White cardstock from Papertrey Ink, and my card was complete. I didn’t want to add anything else to it.
For such a simple scene I sure used quite a few colors. The ones that come after the jump in this graphic are the ones I used to airbrush the sky.
I colored up my penguins with Copics, using a combo of red and teal for their hats and scarves. I’m not a fan of complementary colors, and I do my best to avoid using green with red, but teals, blues and greys all work well.
I didn’t really have a card idea in mind when I printed my image, but I printed it towards the bottom of a 4 1/4 x 5 1/2″ piece of X-Press It blending card. Once I sat down with my colored panel to actually create the card, an idea formed straight away. It doesn’t always happen like that, but I’m grateful every time it does. I created a card base from Summer Splash cardstock from My Favorite Things, cut down my panel to 4 x 5 1/4″ and adhered it to the card base.
Using a snowflake border die from Papirdesign, I die cut a snowflake border above their heads. I used the same X-Press It blending card for this as I wanted the whites to match. I die cut an additional two pieces, and glued them together for a stacked look. The die is actually meant for slimline cards, but it worked really well for this.
I used the Sending You Hugs die from My Favorite Things to die cut my sentiment twice from Summer Splash cardstock. I used the negative piece of the die cut for placement, and layered my letters together for a little bit of dimension. On a piece of Amarena Cherry cardstock from My Favorite Things, I stamped and white heat embossed the word holiday from the Itty Bitty Holiday stamp set, also from MFT. I cut it down to a thin strip, added another layer of Amarena Cherry cardstock behind it for a bit of dimension and stability, and glued my little strip to the H in hugs, before finishing off the card with a couple of sequins from the Sparkling Clear mix from Pretty Pink Posh.
I could have gone crazy with tons of colors for the accessories on these cute penguins, but I limited my color palette by keeping the coloring simple.
Meet
I stamped my images using Extreme Black ink from My Favorite Things, and colored in the scene using my Copics.
After trimming down the panel, I stamped a sentiment from the
I adhered my colored panel onto a square card base I created from Blue Yonder cardstock from My Favorite Things. When I first started making cards, they were all square; 6×6″ is the standard size for handmade cards in Norway, and I admit it’s a fun size to go back to. This isn’t actually fully square, it measures 5 7/8 x 5 1/2″, but it’s the size that best fit my scene, so I went with it.
There’s something cozy and serene about this entire scene, and I really like how it turned out.
Very muted color palette for this one. I see now that I forgot to add the green, but I believe they were BG99, G46, 43, YG61 and G20.
I cut down my panel of X-Press It blending card significantly when my coloring was done, and mounted it on foam tape onto the cardbase, which I’d covered with a scrap piece of patterned paper from the Hjem til jul collection from Papirdesign.
I added a small cluster towards the top right corner of the card, using a mini doily from Doodlebug, as well as some die cut scraps of patterned paper from Maja Design and Sunny Studio. I stamped a sentiment from Norsk Stempelblad AS using Dark Chocolate ink from Papertrey Ink onto Classic Kraft cardstock, also from Papertrey Ink. The dies I used in my cluster are a combination of My Favorite Things (Fishtail Flag Frames and Itty Bitty Strips) and X-Cut (Happy Days Ticket Stubs). I also used the Hero Arts Snowflake Confetti fancy die to die cut snowflakes that I scattered across the card, and I put a white pearl from Kort & Godt in the center of each snowflake to finish the card.
This color combination of blue and bright pink sure was fun, and these are brighter blues than the ones I normally use. I also used a ton of colors for the snow in this little scene. I just can’t help myself.
I printed the image on a piece of X-Press It blending card and colored my birds with Copics in colors that match the Cool Collab paper pad from My Favorite Things, because I really wanted to use it. Red and teal is a color combo I really like, and this paper pad has lots of it. Once my coloring was complete I did some partial die cutting using the largest die in the Slimline Double Stitched Rectangle STAX die set, also from My Favorite Things. It gave me a nice double stitched edge around my colored image.
I adhered my panel to a card base I covered with one of the papers in the pad, which gave me a nice frame. I also die cut the word gledelig from another piece of paper in the pad, with three white die cuts behind for dimension. I stamped the word jul (stamp set from Norsk Stempelblad AS) below it using a combination of Peacock Feathers Distress Oxide ink and Caribbean Sea ink from My Favorite Things to get the perfect color. To finish off the card I added a few heart droplets from the Crystal Collection Glass mix from Little Things from Lucy’s Cards.
Simple color palette for this one.
This image is so quirky and playful, and the look of that cat just puts a smile on my face! This card actually came together pretty quickly and easily. I’d colored all my images for this release over a couple of days, and I spent a couple of hours fussy cutting all the images I wanted to have fussy cut, so when it was time for assembly, this one was a cinch.
Onto a top fold white card base I added a panel of white cardstock that I die cut using the Snowflake Confetti Fancy die from Hero Arts. I love this die, I’ve had it for years, and it’s great for die cutting lots of tiny snowflakes to put on cards, which is what I usually use for. I do, however, keep the bigger die cut pieces in the packaging with the die, and for this card I just pulled one out and adhered it to the card base. Super simple when the die cutting job is done in advance. I like the subtle texture the tone on tone die cut gives. It adds a little bit of interest, but doesn’t steal the show from the focal point of the card.
Seriously, look at that cat. He’s so funny and quirky and awesome!! As I’m writing this blog post, I’m realizing that I’ve kind of colored him to look like Garfield. Totally unintentional, but I’ll just run with it! Now that I think about it, it’s not a him, it’s a her, her name’s Felicia.
I die cut the words god jul (Merry Christmas in Norwegian) twice from Jalapeño Popper cardstock from My Favorite Things using a die from Papirdesign. I glued the two layers together and adhered them on top of my colored image, and my card was complete.
Very limited amount of colors for this one.