Juleklem {Papiria}

Hi, crafty friends. I’m back with a card I actually shared a few weeks ago on the Papiria blog. It’s a very clean and simple one, using only white cardstock, a few dies and some blue ink.

I started with the Snowfall Backdrop Landscape die from Lawn Fawn, which I die cut from white cardstock (Stamper’s Select White from Papertrey Ink). I did a bit of ink blending with Fresh Dye inks from Altenew, using Arctic Mountain, Winter Lake and Icy Water inks going from top to bottom for a gradient effect.

I used the Snøkrystall ramme 2 die from Papirdesign to cut my border of trees and snowflakes. This die set actually has two borders – one that cuts out the trees and snowflakes I used here, and the other one does snowflakes and stars. I thought the trees went well with my snowfall backdrop, which is why I opted for that.

I trimmed down my snowfall backdrop, adhered it to a white cardbase and layered my die cut border on top, before adding a sentiment that I created with the Juleklem die from Kort & Godt. I cut two layers from the same white cardstock I’ve used throughout the card and one layer from an ink blended piece using the same inks that i used for the sky for a very clean look. This card is so simple, and you could easily mass produce this if you wanted to. I only make one offs, but it’s totally up to you.

Merry & bright {Papiria}

Hi, crafty friends. Can you believe we’re in October already? I don’t know where the time’s gone, but I do know that if you haven’t started your holiday cards yet, you might want to think about it soon. Enter Kristina Werner. She’s now launched her own line of products, and they’re SO good. Her September release sold out pretty much on the first day, and it’s no wonder, it’s THAT good. I was lucky enough to grab the things I wanted before they sold out, though, and the products are now back in stock.

I wanted to create a blue Christmas card. Blue’s my jam, and I had this idea as soon as I saw the release. I started with the Merry Trees stencil set, which is a set of two stencils that creates a line of trees. Each of the stencils has two “layers”, and if you layer all four you have the full line of trees in up to four colors. I used the Northern Shore family of Fresh dye inks from Altenew for my stenciling, it’s a great blue family of inks.

Using the Merry Trees die set, I took the big MERRY die and die cut it straight out of my ink blended trees. I also die cut an additional four layers of using After Midnight cardstock from My Favorite Things. I cut off a little on each side of the white panel, adhered it to a card base in that same dark blue color and puzzle pieced the letters back in. The fact that they’re stacked with a dark color makes the word easier to read than if I’d used white to stack.

I white heat embossed a couple of sentiments from the Merry Greetings builder stamp set onto After midnight cardstock and cut them down to sentiment strips using the Merry Greetings builder die set. I usually use a steel ruler and craft knife to create my sentiment strips, but there’s something about the roundness of the edge that you get by using a die. I added a few more strips of cardstock behind each of the sentiment strips for dimension and placed them above and below the die cut MERRY to complete the sentiment.

I decided not to use any embellishments on this card. Sometimes I feel like the colors and cardstock do all the work for me, and I love how this one turned out.

Have a cool yule {Lili of the Valley}

Hi, crafty friends. I’m back with another Christmas card in non-traditional colors, this time using a snowball image from the new Polar Christmas release from Lili of the Valley. The set is available for pre-order here.

I colored the little snowball with Copics and fussy cut him, adding a touch of black glaze pen to his eyes to make them shiny, and then a tiny white dot of Gelly Roll 05 once the black was dry. I used the Fa la la inlay die from Concord & 9th and die cut a white panel. I trimmed off a little on each side and glued it to a card base I created from Grapefruit cardstock from Concord & 9th, inlaying the white letters back into place. I cut a few in the grapefruit color, stacked them and emphasized one line in the background using this color, which left just enough room on the right for the snowman to sit on some foam tape.

I stamped and white heat embossed a sentiment from the older Christmas Greetings stamp set from Lili of the Valley onto a piece of Aqua Sky cardstock from Concord & 9th. The cardstock color was a little bit light for the white letters, so I ink blended on top using Aqua Sky ink to make the sentiment more visible. The exposure in the photo makes it lighter than it is in real life, it’s actually very easy to read it in person. I used the Snowflake Confetti Fancy die from Hero Arts to die cut small snowflakes from Aqua Sky cardstock. I stacked two of each for a tiny bit of dimension and used them as embellishments on the card.

Very limited color palette for this one.

Merry Christmas {Rachelle Anne Miller}

Hi, crafty friends! It’s a well known fact that I’m a sucker for penguins, so I was over the moon for this month’s release from Rachelle Anne Miller. It’s the Penguin Party scene creator set, which is geared toward celebrations with balloons, party hats, presents and little pennant flags. I created a birthday card with this set earlier in the month. Today, I chose a penguin that doesn’t have any accessories besides a scarf and created a holiday card.

I colored my penguin with Copics, fussy cut him and used a black Glaze pen to add shine to his eyes, before putting him aside while I worked on the rest of my card.

I really wanted to use the big MERRY greeting in the Merry Trees stamp set from Kristina Werner. I love her cleanly designed products, they’re right up my alley, and this greeting makes a statement. I stamped with VersaMark onto Juniper cardstock from Concord & 9th, before sprinkling on super fine detail embossing powder from Ranger, which I then heat set. I die cut an additional four layers of the letters from white cardstock and stacked them with the green on top.

I used the Berries & Boughs embossing folder from Concord & 9th to create a little bit of interest to the background. I trimmed my white dry embossed panel slightly and adhered it to a black cardstock panel that I adhered to a top fold white card base. I arranged my merry letters on the front of the card, added my penguin with foam tape and also added a white on black heat embossed sub sentiment from the Christmas Greetings stamp set from Lili of the Valley.

I added a few pearls from the Glossy Porcelain mix from Little Things from Lucy’s Cards to finish. I love how I was able to turn this cute party penguin into a holiday penguin, and I’m kind of liking the untraditional Christmas palette of green and black.

I messed around with a few greens to find the right combo to somewhat match my green cardstock. If it hadn’t been for that, this would have been a very limited color palette.

Christmas hug {Kort & Godt}

Hi, crafty friends. I’m sharing a simple card today with some goodies from Kort & Godt.

I had a dry embossed white panel in my stash I thought I’d put to good use (I used the Snowflake Confetti fancy die from Hero Arts with an embossing mat to create this texture).

I die cut a scribbled circle and a couple of layers of a poinsettia from Ocean Tides cardstock from Papertrey Ink. I used the same color cardstock to create my card base and mounted my white panel at an angle to create a dynamic design.

I adhered the circle with a tiny bit of glue where my leaves would cover it, making the rest of the circle float above the rest.

I cut apart the poinsettia petals to use as leaves and inked over them with Eucalyptus and Rainforest inks from Concord & 9th. I adhered the large ones with a bit of foam behind each leaf for dimension, but glued the smaller ones straight down at the base of the leaves.

Using liquid glue, I added three large berries to the center of my leaf arrangement before finishing off with a sticker, which I put slivers of foam on the back of for even more lift. I like that it kind of floats above the rest.

Kort & Godt products used:

Die 355 (scribbled circle)

Die 302 (poinsettia)

ST1020 (sticker sentiment)

PB201 (berries)

God jul {Kort & Godt}

Hi, crafty friends. I shared this very simple Christmas card on the Kort & Godt gallery blog last week, but thought I’d share here, as well.

I love the new image sheets from Kort & Godt, and the Christmas ones they just released are AWESOME! I used one of the blue ones for this card and decided to fussy cut the wreath. This is pretty easy to fussy cut leaving a white border. I used the Snowflake Oval Frame embossing folder from Simon Says Stamp on a piece of Fine Linen cardstock from Papertrey Ink to create some texture to my background. I cropped off quite a bit on the edges and used a blue cotton thread from Kort & Godt to add a little something to the design.

I mounted my embossed panel onto a card base I created from Blue Beyond cardstock from My Favorite Things. I used the same color cardstock to die cut my sentiment. I stacked two, so they would be a little sturdier, mounted the wreath in the top center, adhered God directly to the wreath and jul onto the embossed piece. And that’s it, I didn’t add any embellishments to this.

Kort & Godt products used:

MA1027 (image sheet with wreath)

DIE-347 (sentiment)

TR-115 blue cotton thread

God jul {Mo’s Digital Pencil}

Hi, crafty friends. Guess what? Christmas is in five months. At least it is if you celebrate on the 24th. I love creating Christmas cards, and since it’s Wednesday, also known as Mo day, I couldn’t resist creating a holiday card with this Feed the birds image from Mo. I flipped it, so the girl faces right instead of left.

I printed the image on a piece of X-Press It blending card, colored it with my Copics and used a die in the Additional A2 Layers die set from Waffle Flower to trim the rectangle down a bit. You could also use a trimmer for this. Into the panel, I die cut the words god jul using dies from Kort & Godt. The two words are actually from separate die sets, but work perfectly together like this.

I adhered my panel to a top fold card base I created from Autumn Rose cardstock from Papertrey Ink, paper pieced the counters back into place, sprinkled on Chunky White embossing enamel from Stampendous and heated the granules from the back. I should have done this before adhering my panel to the card base to spend less time with the heat gun (melting the powder through two layers of cardstock takes significantly longer than doing it through just the one layer), but I honestly forgot about it. It does work through two layers, it’s just a matter of patience.

Once my snow was in place, I die cut four layers of each of the words from black cardstock. I stacked them, added the colored one on top and puzzle pieced them in where they belonged, before adding a few Snowdrift sprinkles from Little Things from Lucy’s Cards to finish the card.

Pink and dirty green. This is about as close as I (willingly) get to using red and green together on a card.

God jul {Streamside Studios}

Hi, crafty friends. I know you’re probably not thinking about Christmas since we’re still 10 months away, but I love creating holiday cards all year and have a cute one to share today, featuring the Christmas Squishies digi stamp set from Streamside Studios. You know I can’t resist penguins, and these are adorable.

I colored up the penguins with my Copics and fussy cut them right up against the black lines. These are very simple shapes and easy to fussy cut. I put the penguins aside while I worked on the rest of my card. Onto a card base I created from Blue Breeze cardstock from My Favorite Things, I stamped tiny snowflakes from North Star Design using Spring Rain ink from Papertrey Ink for a subtle tone on tone look. This is super subtle, my ink pad needed reinking, but I went with it and didn’t reink until after the project was complete, I didn’t want to stop half way.

I used the Stitched Snowflake Backdrops die from Lawn Fawn to create an impressed snowflake pattern on a piece of Stamper’s Select White cardstock from Papertrey Ink. I added a few extra layers of cardstock behind it and adhered it to the card base. Using the Postage Collage Die and coloring stencil from Waffle Flower, I created postage stamps for my penguins to sit on. I stamped the snowflakes on these as well, and ink blended a little in from the edges to define them a tiny bit. It’s still subtle, I hadn’t reinked my ink pad at this point. I added dimension behind each of the postage stamps, adhered them to the card and mounted the penguins on top. I used the Hjerte 3 die set from Papirdesign to die cut my sentiment from Berry Sorbet cardstock from Papertrey Ink. I die cut four and stacked them together for a dimensional look, before adding a heart from the Christmas in Your Heart embellishment mix from Streamside Studios as a finishing touch.

Simple coloring for simple images.

Happy holidays {Mo’s Digital Pencil}

Hi, crafty friends. It might seem early to be making holiday cards this time of year, but Christmas is only 11 months away. Just sayin’. I love creating holiday cards all year, and this Got the Wreath image from Mo’s Digital Pencil is one I’ve used plenty of times in the past, so I felt I had to come up with color palette I hadn’t previously used on this image.

I colored the image with Copics, then used a die from the Blueprints 27 die set from My Favorite Things to give the panel a nice border around the edge. I added a few layers of cardstock scraps behind the panel for strength and dimension. I created a top fold card base from Lavender Moon cardstock from Papertrey Ink and ink blended from the bottom using Autumn Rose ink, also from Papertrey Ink. This gave my card base a nice ombre effect.

I used the Big Happy Holidays die from Mama Elephant to die cut four layers from Lavender Moon cardstock. I used the same ink blending trick for the top layer that I used for the card base, ink blending it before I die cut and stacked all four together for a nice, dimensional sentiment. To finish off the card I added a few die cut snowflakes. I used the Snowflake Confetti Fancy die from Hero Arts and CR1335 from Marianne Design to create my snowflakes, and my card was complete.

I always go overboard when I color snow, even though there was very little of it this time.

Let it snow {Mo’s Digital Pencil}

Hi, crafty friends. You might think it’s early to be sharing the first Christmas card of the year already, but with the amounts of snow we’ve currently got, this Winter is coming image from Mo’s Digital Pencil was the perfect one to use. It’s been snowing, it’s been windy, it’s been chaos. I spent longer getting home from work than I spent AT work today. All the buses in the city were cancelled, trains across the entire eastern part of the country weren’t running, I tried the metro, but that didn’t work either, and they even had to shut down the main airport because the snow and wind combo was too much for the plows to handle, they couldn’t clear the runways before they filled back up with snow. This has only happened three times in the last 12 years, so it was kind of crazy. Evidently, the trams were running, but they’re mostly downtown and nowhere near me, so this card? Very fitting today.

I really don’t want the sentiment to come true right now, I don’t remember there ever coming this much snow in the city in such a short time, and I’d very much like to not have to walk to work tomorrow. I saw plenty of people out with their shovels today when I walked home, their cars were snowed in, their driveways were full of snow and they could barely open their front doors. It’s winter, we get it, but it’s enough now, we don’t need more snow.

I’m done venting. I think. I was originally planning on adding a stacked die cut where all the snow is, but then I came up with the idea of a shaker card instead. It’s kind of like the little person under the beanie is trapped inside the shaker with all the shaker bits, which I thought was a fun concept.

I used the Giant Let It Snow die from Lawn Fawn, covered my window with acetate and filled my shaker well with Distress Mica Flakes, a little bit of Rock Candy Distress Glitter and a small pile of embellishments from the Starry Night mix from Little Things from Lucy’s Cards.

I added my shaker panel to a top fold card base I created from Blueberry cardstock from My Favorite Things and decided not to add anything else.

Very simple color palette for this one.