Hi, crafty friends. I have a slimline card to share today, featuring the Advent Characters stamp set from Lili of the Valley. There are 12 characters in this stamp set, and I chose 3 for my card today. The penguin was a given, so was the reindeer, and I added the elf because I wanted something human like in there as well.
I colored the characters with Copics, fussy cut them leaving a white border, then added black glaze to their eyes and then a white dot on top with a Gelly Roll 05. Rudolph got special treatment with a little bit of Glossy Accents on his nose for additional shine.
I used the Slim Card Basics die set from Mama Elephant to create my window panel. I die cut one from Blueberry Sky cardstock from Papertrey Ink and four white ones that I adhered behind it for dimension. I die cut the bigger scalloped rectangle in the Slim Card Basics set from Spring Rain cardstock, also from Papertrey Ink, and adhered it to a white card base.
I used the Silhouette Snow Trees die set from Mama Elephant to create white trees to go into the window openings behind my characters.
I stamped a sentiment from the Christmas Greetings stamp set from Lili of the Valley using Blueberry Sky ink from Papertrey Ink, cut it down to a strip, adhered a couple of additional layers behind it and glued it to the frame between two of the characters.
I finished off the card with a few pearls from the Glossy Porcelain mix from Little Things from Lucy’s Cards.
I love dimension on my cards, and this one certainly has that.
Between the shine on Rudolph’s nose, all the blue and all the dimension, this card makes me happy. I just wish it was easier to photograph slimline cards.
I used way too many Copics for these three.
I colored the mouse with Copics and fussy cut her, leaving a thin white border. I used a black Glaze pen to create some shine in her eyes, and once the black was dry I added a dot of white using a Gelly Roll 05.
Onto a white cardstock panel, I ink blended Amarena Cherry and Wild Cherry inks from My Favorite Things for an ombre effect. I then used a die cut as a stencil to add some snowflakes to the background with modeling paste from The Crafter’s Workshop. The die I used to die cut the makeshift stencil is the Snowflake Confetti fancy die from Hero Arts, which is one of my all time favorite Christmas/winter dies.
I cut the ink blended panel down a little and adhered it to a panel of Amarena Cherry cardstock from My Favorite Things that covers the front of a top fold white card base I created from Stamper’s Select White cardstock from Papertrey Ink.
From white cardstock, I die cut the Polaroid Shaker Frame die from My Favorite Things five times for a stacked look, stamping a sentiment from the Christmas Greetings stamp set from Lili of the Valley to the top layer using Amarena Cherry ink from My Favorite Things. I added the cute little mouse on top of the frame, and my card was complete.
If you look closely, you can see the shine in the eyes in this photo.
Very Christmas-y color palette for this one.
The design of these snowmen peeking out from behind something offers so many possibilities for fun card designs. For my previous card using one of these, I created a tri fold card with the snowman peeking out behind one of the flaps. This time, I have a snowman sticking out above the top of the card.
I colored my snowman with Copics, cut away everything below the line in the image and adhered him to the top of a quarter sheet of Stamper’s Select White cardstock from Papertrey Ink, before cutting around him.
I adhered my panel to a top fold white note card I created from Stamper’s Select White and cut off the bottom of the card, so that it’s 5 1/2″ tall including the snowman.
I glued on white snowflakes all across the front. I used the Snowflake Confetti Fancy die from Hero Arts and die CR1335 from Marianne Design to create the snowflakes. I like the white on white look. This adds a tiny bit of dimension and interest to the background.
I then used the Big Happy Holidays die from Mama Elephant to die cut five times from Blue Yonder cardstock from My Favorite Things, before stacking them and adhering my chunky die cut in the center of the card.
I stamped and white heat embossed Let’s be jolly! onto a strip of Enchanted Evening cardstock from Papertrey Ink. The sentiment is from the 
Small image, but as usual, I went overboard when coloring the snow, so there are quite a few Copics used anyway.
My original plan was to color in their accessories in a peachy pink color and a dark green combo that I love for my Christmas cards. There’s usually a lot of detail to the Lili of the Valley accessories (stripes and dots), making it easy for images to look messy if you choose too many colors. I tend to opt for a lighter and darker version of the same color, which makes it better for the eyes. Once I’d done the peachy pink, I went in with the lighter of the greens, because I didn’t know how dark I wanted it. When the light green was in place, I realized I really liked the light color with the pink, so I decided not to add too much of the darker greens.
Once the coloring was complete, I used the largest die in the Wonky Stitched Rectangle STAX set from My Favorite Things to turn it into a panel with a fun faux stitch edge. I then used Winter Lake, Icy Water and Polar Bear inks from Altenew to ink blend a soft sky from the top, before sprinkling on Chunky White embossing enamel from Stampendous and melting the granules from the back of the paper with my heat gun.
I adhered the panel to a top fold card base I created from Berry Sorbet cardstock from Papertrey Ink. From Grapefruit cardstock from Condord & 9th, I die cut the oh so merry from The Penguin’s Waddle die set from Mama Elephant. I cut three and ink blended on the bottom using Berry Sorbet ink from Papertrey Ink, before stacking them together for a dimensional look and adhering them to the card. I finished the card with a few Coral Heart droplets from Little Things from Lucy’s Cards.
I realize now that the green mitten probably belongs to the snowman on the far left, which means I should have colored it pink. Oh well, next time. The faux stitching, the snow and the ink blend on the letters add a bit of texture and detail to the card without adding bulk. Of course, I love my dimension, so I layered up the die cuts and added the heart droplets, but this card is still fairly mail friendly, I’d say.
The cardstock from Concord & 9th, which is what I used for my stacked sentiment, is not a very thick cardstock, so it’s great to use if you don’t want too much dimension on your cards. I just really wanted that color, which is why I chose it, but it also die cuts really well.
Last, but not least, my color palette. I still go overboard when I color snow, I have a feeling that won’t ever change.
This is the card closed. I created this by gluing 2 side fold A2 card bases together; the half with the snowman with the fold on the left and the other one with the fold on the right.
I used the Snowflake Confetti fancy die from Hero Arts to die cut from Gina K Masking Magic to create a stencil to ink blend through. I used Iceberg ink from Altenew to create subtle blue snowflakes in the background on the front of the card to the left of the snowman and also on the other flap.
I adhered an 1/8″ gold glitter cardstock strip from Kort & Godt for the snowman to hold on to for a defining edge and used the Stacked Merry die from My Favorite Things to die cut 6 times for a stacked look. 5 layers from white cardstock, the top layer from a piece of X-Press It blending card that I colored to match the green on the snowman. I stacked the six layers and adhered them in the center of the left front panel, stamped and white heat embossed a sub sentiment from the 
I embellished with a combination of gold pearls around the sentiment and tiny confetti stars all across the background. Both are from the Vanilla Kiss mix from Little Things from Lucy’s Cards. I also added a bit of black glaze pen to the eyes of the snowman. It adds a tiny bit of dimension and some shine. Once dry, I went over with a dot of white, using a Gelly Roll 05.
On the inside flap, behind the snowman, I stamped another sentiment from the Christmas Greetings stamp set from Lili of the Valley, this time using Jalapeño Popper ink from My Favorite Things.
Simple color palette for this one. Lots of colors for the snow, though, I can’t seem to help it.
The cold weather’s been perfect for Christmas in July, though, and this 
I colored both the penguin and the letters with Copics and fussy cut them. I left a white border around the penguin, but cut the letters up to the black lines.
I created a circular card base from Stamper’s Select White cardstock from Papertrey Ink, and added a circle on top that I created from Sno Cone cardstock from My Favorite Things. I dry embossed the Magic Snow Cover die from Mama Elephant onto the colored cardstock for a little bit of added interest in the background, before mounting the penguin in the center of the card and adding the letters around him.
To finish off the card I added a few Snowdrift sprinkles from Little Things from Lucy’s Cards to the letters. I tried using pearls first, but these worked better with the card. She’s stopped selling these clay sprinkles, so I kind of hoard the ones I have.
Super simple color combo for this guy.
There are five adorable penguins in this stamp set, and I chose two to color, with a vague idea for a card in the back of my mind as I was coloring. Once I’d colored both penguins and fussy cut them, I realized splitting them up and creating two cards would be better. For this card, I placed the Grid stencil from My Favorite Things at a bit of an angle directly on my top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink. Using Sno Cone ink from My Favorite Things and a blender brush, I created a soft blend near the bottom of the card front, fading to white above and below.
The wishes die from Mama Elephant is probably my most used word die, I love it so much. I die cut it five times from Wild Cherry cardstock from My Favorite Things and stacked the die cuts for dimension. Onto the background I stamped a sub sentiment and the word Christmas from the 
The good thing about small(ish) images is that you don’t need heaps of colors. They’re also fairly quick to color.
This time I’m focusing on 
I colored the image with Copics, then used the largest die in the Blueprints 27 die set from My Favorite Things to turn it into a rectangle with faux stitching and a scalloped edge, just for something different from my usual faux stitch rectangles. I die cut another piece from white cardstock to put on the inside of the card.
Before adhering my panel, I sprinkled on Chunky White embossing enamel from Stampendous, and melted the granules from the back of the panel. I also used a black glaze pen from Sakura to create a tiny bit of dimension and shine to the penguin’s eyes. I adhered the panel directly to a top fold card base I created from After Midnight cardstock from My Favorite Things, which is a nice dark blue color.
From the same color cardstock, I die cut God jul four times using a die from Papirdesign. I stacked the layers and adhered it to the left of the image, before finishing off the card with a few hearts from the Festivities mix from Little Things from Lucy’s Cards.
This is a fairly flat card for me. Other than the sentiment and the white hearts, there’s nothing that adds a lot of dimension. I considered mounting the panel on foam tape, but in the end decided against it. The sentiment and the hearts still pop and add interest, as does the snow, which has a bit of texture to it.
I used mostly blue Copics for this card. Not really a surprise, huh?
I printed my image so it would fit a mini slimline card nicely, and didn’t feel like choosing colors, so I asked my color buddy Liz for suggestions. She really wanted to challenge me and said “red (not E), green (not BG) and gold”. She knows I don’t like red and green together, she knows I use the Es to create red on my Christmas cards and she knows I use BG colors or greys in combination with those Es. It’s kind of scary how well she knows what I like and use. I admit I was a little reluctant to try this at first, but I always run with her suggestions anyway, and I think it turned out okay (except for the huuuuge white dots on the green scarf).
Once I finished my coloring, I stamped and white heat embossed a sentiment from the Christmas greetings stamp set from Lili of the Valley, white heat embossed a few details in the image, then die cut it using partial die cutting and the largest die in the Slimline Double Stitched Rectangle STAX die set from My Favorite Things. I added a couple of layers of white cardstock behind the colored panel and mounted it all to a card base I created from Amarena Cherry cardstock from My Favorite Things. The finished card measures 6 3/8 x 3 1/2″.
No Es. And even though I used BG99 in my green combo, it still reads green and not BG. BG99 is great to use for dark green.
I printed the image fairly large and chose a summery color palette of hot pink, apple green and bright yellow. I colored the image with Copics and used the largest die in the Additional A2 Layers die set from Waffle Flower to turn it into a nice rectangular panel. I put the panel in my MISTI, and used the A06 stamp set from Norsk Stempelblad AS to stamp sentiments on the plain candles. I used Jalapeño Popper ink from My Favorite Things for the green candles, Raspberry Fizz ink from Papertrey Ink for the pink candles and Spiced Marmalade distress ink from Ranger for the yellow candle, with a little bit of help from VersaMark to prevent the distress ink from beading up on the photopolymer.
Once all my stamping was done, I adhered the panel onto a black card base I created from True Black cardstock from Papertrey Ink. I also die cut a panel to go on the inside from Stamper’s Select White cardstock from Papertrey Ink for a place to write my personal greeting. I used my black Glaze pen from Sakura to create a little bit of shine to the eyes and the nose of the bear, and added sequins from the Seashore and Iced Sherbet mixes from Little Things from Lucy’s Cards for a finishing touch.
Simple color palette for this one 🙂
Papirmølla 