Hi, crafty friends. I’m back with more gift tags, this time featuring my favorite Christmas critter: penguins! The Playful Penguins from Amanda Jayne Designs are adorable, and I printed them tiny, colored them and turned them into simple gift tags.
I colored the penguins with Copics and fussy cut them all, leaving a white border around the edge. I used the Fold-Up Tags from My Favorite Things to die cut four tags from the Hvite juleblomster patterned paper from the Gledelig Jul collection from Papirdesign before I adhered each penguin to each of the tags using 1 mm foam squares.
I stamped and white heat embossed several sentiments from the Jul stamp set from Norsk Stempelblad AS onto Classic Kraft cardstock from Papertrey Ink. I also die cut reinforcements for the tags from the same cardstock, and some tiny snowflakes from white cardstock (also from PTI) using the Snowflake Confetti Fancy die from Hero Arts. I mounted the sentiment strips on foam squares, adhered the snowflakes using liquid glue and added a 2 mm white pearl from Kort & Godt to the center of each of the snowflakes. I used natural twine from May Arts through the reinforcements and threaded two gold bells to each piece of twine before securing the twine to the tags.
On the back of the tags I stamped to/from labels from the B06 stamp set from Norsk Stempelblad AS using Dark Chocolate Ink from Papertrey Ink. I stamped the labels before adding the reinforcements. In hindsight, I wish I’d kept the stamps in my MISTI and restamped after the reinforcements were glued on, so the label would be continuous on the back, but I didn’t think of it as I was creating. I’ll try to remember for my next batch of tags.
Simple color palette for these simple tags.
Three same, but different gift tags using all the gingerbread people in the stamp set. I created the tags themselves using dies (two of them are actual tag dies, I used the topper from the ornament die set to create a topper for the heart to create a tag from that too). I used the Itty Bitty Gifting stamps and the Itty Bitty Strips dies, both from My Favorite Things, for all my to/from strips.
I used Classic Kraft and Stamper’s Select White cardstock for most of my die cutting, both from Papertrey Ink. For the ornament I also used a piece of silver cardstock from Rayher. I did all my Copic coloring on 120 lb white cardstock from Simon Says Stamp. This isn’t the cardstock I normally use with my Copics, but it’s great for one layer cards and elements that you can see the back of, because the markers don’t bleed through. Getting smooth color blends with Copics is trickier on this cardstock than my beloved X-Press It blending card, but the thickness saves me from having to fussy cut each of those gingerbread twice to cover up any bleed through. It’s worth the trade off, I think.
For the yellow one, I used the Snøfnugg, stor die from Papirdesign to create the snowflake tag. I added Nuvo Jewel Drops in the Key Lime color to the green buttons on the belly, and used a couple of pearls from the Igloo mix from Little Things from Lucy’s Cards for a little bit of embellishment. I put a piece of Divine Twine in the Lemon color through the hole at the top, making it easy to add to a gift.
For the pink one I used the Hjerte 3 die from Papirdesign to create the tag (and the Julekule die to create the hole at the top). The sequins are from the same Igloo mix that I used for the yellow, and I also added Jewel Drops in the color Key Lime to the buttons on her belly. The twine is Divine Twine in the Cotton Candy color.
And finally the green one. I used the Julekule die set from Papirdesign to create the actual tag, Nuvo Jewel Drops in the Limoncello color for the star on his sweater, and green dots from Papirdesign to embellish. The twine is Divine Twine in the color Green Apple.
Very simple color palette for these.
I love Mo’s elves, and this is 
Once the image was colored, I used the largest die in the A2 Stitched Rectangles STAX 1 set from My Favorite Things to create a faux stitch border. I then white heat embossed a sentiment from the Mini Messages stamp set from Mama Elephant in the center of the darkest bauble, before adhering the panel onto a top fold card base I created from Enchanted Evening cardstock from Papertrey Ink. I added a few diamonds from the Urban Chic mix from Little Things from Lucy’s Cards to finish off the card.
Simple color palette for this one. It was super fast to color too, which isn’t usually the case with no line coloring.
I colored up the scene using Copics, then used the largest die in the Slimline Double Stitched Rectangle STAX die set from My Favorite Things to add faux stitching to both sides. There’s no reason you can’t use slimline dies for an A2 sized card, and this worked out really well, the die was the perfect width for my image.
I used a black glaze pen from Sakura to get some shine and dimension into the eyes of these cute critters (you can see it in real life when you tilt the card in the light, I promise), then sprinkled on Stampendous chunky white embossing enamel that I melted from the back of the panel.
Using lots of foam tape, I adhered my panel to a top fold card base I created from Blueberry Sky cardstock from Papertrey Ink. This blue is gorgeous, and it’s perfect for the B90 Copic family.
I white heat embossed a sentiment from the Christmas Greetings stamp set from Lili of the Valley onto a piece of Amarena Cherry cardstock from My Favorite Things. I cut the sentiment down to a strip and added it to the card using foam tape.
To finish off the card I added a few die cut heart outlines. These are from the Wax Seals die set from Waffle Flower. There are two different sized hearts in the die set, I used both for this card and cut them from Amarena Cherry cardstock before adhering them to the card.
Simple color palette for this one. Lots of colors used for the snow, that’s pretty much a given when I color snow.
I colored up the image yesterday, actually, while watching Tim Holtz’ live on Instagram. Once the coloring was complete, I used the largest of the dies in the Wonky Stitched Rectangle STAX die set from My Favorite Things to give it a nice faux stitch edge.
I adhered my colored and die cut panel to a quarter piece of Classic Kraft cardstock from Papertrey Ink, then adhered it all to a top fold note card I created from white cardstock, also from Papertrey Ink.
I thought the sentiment was perfect for this little image, and decided to print it in brown onto Classic Kraft cardstock. I then used a 1″ circle punch from EK Success to cut it, then added it to the card using foam tape for a little bit of dimension.
I kept the card very simple and decided to only add a few sequins. I love the sequin mixes from Little Things from Lucy’s Cards and use them very often on my cards. These particular ones are from the White Orchid sequin mix.
A little bit of a side view shows the dimension and those sequins a little bit better.
Not a lot of Copics used for this card, this came together really quickly.
This is one of the penguin chicks from the 
I colored the penguin very simply with my Copics, sprinkled on chunky white embossing enamel to my panel and added it to a top fold note card I created from Blue Breeze cardstock from My Favorite Things. I then die cut the Let it snow sentiment using a die from Mama Elephant. I die cut three layers of the same blue color cardstock and adhered them for a stacked look in the top center of the card before finishing off with a few snowdrift sprinkles from Little Things from Lucy’s Cards.
Very simple color palette for this one.
This set comes with sooo many images, and I’ve actually used 11 different ones for this card. I added the lines for the shelf with a black pen, but everything else in the scene comes in the one stamp set.
I’m known on the design team for occasionally printing my images very small. This time I might have set a new record, the mouse and the eyeballs in this scene were so small, they were tricky to color, but I really wanted them this size to fit the scene and the card design.
Once I finished the coloring, I trimmed the panel down to 3 1/4 x 4 1/2″, and put it aside while I worked on the rest of the card.
I created a card base from Cement Gray cardstock from My Favorite Things, added three 1/4″ strips of cardstock in colors that matched the scene (Royal Velvet from Papertrey Ink, Orange Zest from Papertrey Ink, Sour Apple from My Favorite Things), before I mounted the scene on top using plenty of foam tape.
I stamped and white heat embossed the sentiment from the Itty Bitty Boos stamp set from My Favorite Things, added a few more layers of cardstock behind it for stability and dimension and finished off the card with a trio of acetate ghosts from the Candy Corn mix from Little Things from Lucy’s Cards.
Lots of Copics for this little scene.
As soon as I saw this stamp set, I knew these snow globes would make the perfect shaker cards. The stamp set comes with the snow globe and six different scenes you can stamp inside. I, of course, opted for the penguin, but there’s also a snowman, a car with a tree on the roof, a house, a tree with presents and a village, as well as a few sentiments.
I stamped and colored the empty snow globe on a quarter sheet of X-Press It blending card. I stamped the penguin on a separate piece of blending card and colored that for the inside of my snow globe. I glued a few Kort & Godt pearls around the penguin and put him aside while I worked on the rest of the card.
I cut the center out of the snow globe and adhered a piece of acetate to the back of the white cardstock, before adding foam tape on the back of the shaker area, making sure not to leave any gaps. With glitter inside the shaker window, you don’t want it to escape.
I put a mix of clear Distress glitter from Ranger and some micro beads inside the shaker area, before adding my colored penguin to the exposed adhesive of the foam tape to close the shaker.
I initially put too much inside (I always seem to put too much inside) and had to pour some out to get the perfect amount. I then adhered my popped up snow globe to a card base I created from Enchanted Evening cardstock from Papertrey Ink. I used the merry script die from Mama Elephant to cut the word merry three times from Blue Breeze cardstock from My Favorite Things, stacking the die cuts for a dimensional look. Near the bottom of the letters I softly ink blended a bit of Blueberry Sky ink from Papertrey Ink to add a little bit of a gradient. I stamped the word Christmas from the 
This is a fairly simple looking card, but it’s got tons of dimension and a shaker card is always fun, right?
Not a whole lot of Copics for this one. I did also use B90, which is a color I made myself using an empty marker, some B91 refill and blender refill.
I printed the image with a 10% opacity onto X-Press It blending card before coloring. Whenever I want to color things that are supposed to look close to white (ice, snow, polar bears +++), I prefer doing a no line version. To me, there’s something very distracting about black lines on an image that’s supposed to look white, so I prefer the softer no line version. I colored the image with Copics, starting with the sky, then ocean, ice floe, polar bear and finally the penguin and his little scarf. I prefer doing the black towards the end, it’s just good practice to avoid getting it into nearby areas where you don’t want it.
Once I finished the coloring, I die cut the panel using the second largest die in the A2 Stitched Rectangles STAX 1 set from My Favorite Things, before mounting it on foam tape onto a white card base I created from white cardstock from Papertrey Ink. I die cut the word klem (hug) twice from white cardstock using a die from Kort & Godt. It’s actually a Christmas die that says juleklem (Christmas hug), but by using only the latter part of the word, I have a completely different use for the die, which I love. That’s the whole card, I decided not to add any embellishments, I wanted to keep the focus on the image.
Loooots of Copics for this deceptively simple scene.
Using the Itsy Bitsy Polka Dot Backdrop die from Lawn Fawn, I die cut a panel of white cardstock from Papertrey Ink to add a little bit of texture to the front of my card. I adhered it to a quarter panel of Blue Breeze cardstock from My Favorite Things, before using the Selfie Square die, also from My Favorite Things, to die cut a window in the top center.
I put foam tape on the back of my polka dot panel and adhered it to my colored piece, making sure to line up the image so it would show trough the window the way I wanted it to. I then grabbed a quarter panel of Jalapeño Popper cardstock from My Favorite Things and used my G99 Copic marker and scribbled it close to the edge of the green cardstock to make the color match my car a little bit better. Green cardstock is tricky, and I don’t often find the right kind of green that I want for my projects. This was an easy hack, but if anyone out there has a suggestion for a green cardstock that is close in color to G99 (or G94), please let me know.
I adhered my improved green cardstock to an A2 top fold white note card and mounted the polka dot piece with the colored window using foam tape – lots of it. I then used the same Blue Breeze cardstock that I used previously to cut the word merry three times using the Merry Script die from Mama Elephant. I love their script dies! On the top layer I spritzed sheer shimmer craft spray from Imagine for a bit of sparkle to the letters. Unfortunately, details like that are tricky to photograph, but it’s definitely noticeable in real life, trust me 🙂
Onto a leftover scrap of X-Press It blending card, I scribbled an even layer of G99 to create a dark green cardstock that would match my colored image. Onto it, I white heat embossed the word 
I love my Copics and used quite a few for this rather simple image.
Papirmølla 