Hi, everyone! I’m back today with another card featuring a cutie from Mo Manning. This is Sheriff, and I turned him into a birthday card. The design of this card, and the super bright colors are a bit unusual for me, but I’m trying to use more of my supplies, and also use them differently than I have in the past. I also don’t normally put this many enamel dots on my cards. 7 is a LOT, I usually go for 2 or 3.
I colored up the image with my Copics. Nothing unusual about that, but these blues are brighter than the ones I normally use. The colored panel was too narrow to fill the width of a regular card, so I decided to put a frame around it. I used one of the wood frame nested dies from Hero Arts to create my frame from Classic Kraft card stock from Papertrey Ink, and built up layers by adding a few more frames behind the top one. I created a card bas from Lush Lagoon card stock from Papertrey Ink, and used the By the numbers impression, also from PTI, to create a debossed look to the card base. There’s quite a bit of blue showing outside the frame, so I wanted a little bit of texture there.
Using Limelight card stock from My Favorite Things, I die cut the number (from the By the numbers die set from Papertrey Ink) four times and stacked them for a dimensional look. I adhered the number to the frame using liquid glue, and glued a white heat embossed black sentiment strip on top, with two more layers of black card stock behind that, for even more dimension.
I added a bunch of green enamel dots from Papirdesign, and rummaged through my old patterned paper for one I could make an envelope from. I struck gold with this green one from Pion Design from 2010. I don’t use a lot of patterned paper anymore (at least not big pieces), but I can’t exactly throw it away, either, so I figure it’s perfect to create envelopes from. This way, they get used!
Super bright colors. Well, except for all the browns. I actually used five colors for his sheriff’s badge before I ended up with a color I liked.
After coloring the image, I used a die from the nested stitched doily set from Cottage Cuts to turn my colored piece into a circle with some nice detailing along the edge. I die cut two more from white cardstock and added them to the back for a little bit more strength and stability.
Using the Detail Ringlet Plate from Simon Says Stamp, I created a white panel with subtle texture. I wanted something that wasn’t too plain while at the same time not being too distracting from the image. I cut down four more pieces of white card stock, added them to the back of the die cut one and adhered it to a card base I made from Berry Sorbet card stock from Papertrey Ink.
A stacked die cut sentiment (die from Papirdesign) and a heat embossed sub sentiment from Norsk Stempelblad AS were added to the front, and finally a couple of matte gold sequins from Little Things From Lucy’s Cards. Before adhering it to the card, I used a shimmer spray on my colored piece, you can sort of see it in this photo, but it’s a lot more sparkly in person.
I colored the image using my Copics, die cutting it with a faux stitch rectangle die from My Favorite Things for a nice finished loo, before stamping the definition of friend (stamp from Norsk Stempelblad AS) using VersaFine Onyx Black ink.
I added shimmer to the bird and bee using my clear Wink of Stella brush. The sparkle is hard to catch in photos, but in real life it’s very shimmery. I found a scrap piece of patterned paper from Kaisercraft that was already cut down to the perfect size and adhered it to my card base, before adhering the colored panel on top of that. The color of the patterned paper matches the bird nicely. It’s a closer match in real life than I’ve managed to capture in this photo.
I added a couple of sparkling clear sequins from Pretty Pink Posh and left it at that, this is a very simple card. In this photo you can see a little bit of the sparkle in the bird and the bee.
Super limited color choices for this one. I also used BG71, which is a color I’ve made myself using refill of BG72 and blender solution.
I went with a combo of cool Copic colors and even used the E80s, which I hardly ever use. I cut my colored piece down using a faux stitch rectangle die from My Favorite Things.
I used some old scraps of patterned paper to create this card. On my desk I have a container of scraps of patterned paper that I’ve cut down to 4 1/4 x 5 1/2″, making them very convenient to use. The paper I used to cover the entire front of the white card base is from My Mind’s Eye (it’s the same sheet as the one I used for the sentiment banner), the one with the white lines running through it is from Autumn Leaves, from their Manhattan line, which happens to be from 2007. I definitely have some old papers in my stash. The lightest piece is from Kaisercraft. I decided to add dark blue enamel dots from Papirdesign to break a little from the monochromatic patterned paper I had going, and also to reintroduce the blue from the image, even though I really like the grayish teal of the jacket and the patterned paper scraps.
I stamped the sentiment from Norsk Stempelblad AS using VersaFine Onyx Black ink and die cut it using one of the fishtail flag frames dies from My Favorite Things.
Quick and easy coloring of this one without too many colors. As usual when I color snow, quite a few of the colors were used for the snow alone. I also used BG71 on the jacket, which is a color I’ve made myself.
I had trouble deciding whether to make a card for a baby girl or for a baby boy, so I decided to go somewhat neutral with a combo of yellow and green. I colored the image with my Copics, added a clear coat of glitter on the green areas using a Wink of Stella glitter brush.
I stamped a sentiment from Norsk Stempelblad AS using Fresh Leaf ink from Altenew, and decided to even add some clear crystals of various sizes from the Crystal Collection from Little Things from Lucy’s Cards.
I used a frame die from Mama Elephant and die cut 3 frames; two from white card stock and one from Lemon Tart card stock from Papertrey Ink, which is a very nice soft yellow. I glued all three frames together for a stacked look and spritzed the frame with a sheer shimmer spray from Imagine, before adhering the frame onto the colored piece, and then onto a white card base. I paired it with a Lemon Chiffon envelope from My Favorite Things. It’s not a perfect match, but it’s close enough.
Very limited use of colors for this card.
As usual, I colored my image with Copics. I usually also create a panel with my colored images, but this time I did some serious fussy cutting, that stem is super thin. Ginger, one of the talented crafty people I follow on Instagram (you can find her 
I used the Detail Ringlet Plate cover die from Simon Says Stamp on a piece of Berrylicious card stock from My Favorite Things. I chopped off 1/4″ on each side, added a few layers of card stock behind for dimension and adhered it to a top fold card base I made out of Stamper’s Select White card stock from Papertrey Ink. I die cut two tags from the same white card stock and glued them to the panel that was already there.
I glued the girl onto the tag, making sure to put a couple of extra pieces of card stock for stability behind the part of her head that hangs over the edge of the tag. I also added used my clear Wink of Stella glitter brush on her wings, which you can sort of see in the photo if you look closely. I die cut the word hei (hi) four times from Summer Sunrise card stock from Papertrey Ink and glued them together for a stacked look. The sub sentiment is a stamp from Norsk Stempelblad AS, stamped in VersaMark and white heat embossed on New Leaf card stock from Papertrey Ink. I also built that up with a few additional layers of cardstock behind it for stability and dimension, and finished the card by adding a couple of enamel dots from Papirdesign.
Here you can see that there’s a lot of dimension in this fairly simple card.
No post complete without a list of Copic colors used.
I stamped a sentiment from Norsk Stempelblad AS below the image using Scarlet Jewel ink from Papertrey Ink. Using a faux stitch tag die from My Favorite Things, I die cut four tags, one from the panel with the image and three from scraps of patterned paper from the Fröjdefull Jul collection from Maja Design. I glued two and two back to back, before gluing the two double tags together, offset quite a bit.
On the back, I used another stamp from Norsk Stempelblad AS and the same color ink as I used for the front.
I punched a hole through the top of the tag, added a red eyelet for strength, pulled some twine through and also added a snowflake charm to finish.
Simple image means I didn’t use a lot of colors for this one.
I colored the image with Copics, die cut it using a large faux stitch tag die from My Favorite Things and stamped a sentiment from Norsk Stempelblad AS on the bottom using Scarlet Jewel ink from Papertrey Ink. I created three more tag die cuts from the Fröjdefull Jul collection from Maja Design and glued one of them to the back of my colored panel. I glued the other two back to back and glued my two double tags together, slightly offset. I cut a hole at the top of the tag, used a red eyelet for strength and threaded some red twine through, adding a charm with mittens for that little bit extra.
On the back of the tag I stamped a To/From stamp from Norsk Stempelblad AS using Smokey Shadow ink from Papertrey Ink, which is a nice dark gray. I attached a couple of loops I made from one of the patterned papers and was able to thread a candy cane through, I just hope the dog doesn’t get into the presents and eats the candy cane.
Very limited color palette for this one, not a whole lot to color.
I created this gift tag for my niece. It’s quite a big tag, its diameter is about 5″. The white circle panel isn’t just a panel, it’s dry embossed using an embossing folder from We R Memory Keepers. Unfortunately, dry embossing doesn’t show up very well in photos, and even less so when you’ve used white cardstock. It’s there in real life, though, and it provides a little bit of texture. I colored and die the Christmas Baking image from Rachelle Anne Miller, and popped it up on foam tape in the center of the white panel, before creating a hole at the top, adding an eyelet for strength. Through the hole I thread some cherry red divine twine and a tiny little cookie cutter embellishment, I thought it fit the image well.
On the back I added another diecut circle that I’d already added a To/From stamp to, using Scarlet Jewel ink from Papertrey Ink. I cut a slit above and below that to feed the candy cane to, and double up on the foam tape when I glued it to the larger circle.
Quite a few Copics for this one, and I used B90, which is a color I’ve created myself, on the background.
I decided to go for a version in gray and green, and used a die from Papirdesign to create a scallop heart for the front of my gift tag. I stamped a sentiment from Norsk Stempelblad AS using Ripe Avocado ink from Papertrey Ink.
I diecut a regular tag shape from patterned paper from Maja Design using a die from My Favorite Things and glued the scalloped heart to the regular tag.
For the back of the tag I die cut the regular tag shape again from that same patterned paper as the one for the front, as well as a second scalloped heart from white cardstock. I used the same green ink as I did on the front to stamp the To/From stamp from Norsk Stempelblad AS.
Not a lot of Copics used for this one, but it’s a small image.
Papirmølla 