Hi, crafty friends. Today’s the third Thursday of the month. Kind of hard to believe – true, nonetheless. It’s what you get when the month starts on a Thursday, and it also means it’s time to get cracking on Christmas. Just over 3 months to go, it really is time to get started on Christmas cards if you haven’t already. At the very least, it’s time to start thinking about it.
I’ve created a very simple card this time, featuring this cute little car from the new Snowglobes stamp set from Lili of the Valley, which came out earlier this week. The stamp set includes a snowglobe, six different scenes to put inside and a few sentiments. I actually omitted the snow globe entirely for this card, I thought the car to go inside worked well on its own and decided to go for a no line version.
I did some simple no line coloring of the image. I hadn’t done no line in a while when I created this, so opting for this tiny image was perhaps not the most brilliant idea ever. It’s kind of what I do, though, I jump in. I used a grey Copic to give the illusion of someone sitting in the car, used a couple of blues for some simple shading near the tires and kept everything very simple.
Using four different shades of blue ink (Distress Inks in the colors Chipped Sapphire, Faded Jeans and Stormy Sky, in addition to Iceberg ink from Altenew), I softly ink blended an ombre sky before sprinkling on Chunky White embossing enamel for a snowy effect that I love having on my cards. I heated the panel from the back, melting the granules and adhered the panel onto a top fold card base I created from white cardstock from Papertrey Ink.
Using the sentiment die from The Penguin’s Waddle die set from Mama Elephant, I created a chunky sentiment by adding several die cuts together for a stacked, dimensional look. I adhered it to the top center of my card and finished it off by placing a few snowdrift sprinkles from Little Things from Lucy’s Cards near the car.
I love a dimensional die cut sentiment, it kind of says I mean business and adds so much to a simple card!
Simple color palette for this one. It’s a simple card with a tiny image, so it’s kind of a given.
This set comes with sooo many images, and I’ve actually used 11 different ones for this card. I added the lines for the shelf with a black pen, but everything else in the scene comes in the one stamp set.
I’m known on the design team for occasionally printing my images very small. This time I might have set a new record, the mouse and the eyeballs in this scene were so small, they were tricky to color, but I really wanted them this size to fit the scene and the card design.
Once I finished the coloring, I trimmed the panel down to 3 1/4 x 4 1/2″, and put it aside while I worked on the rest of the card.
I created a card base from Cement Gray cardstock from My Favorite Things, added three 1/4″ strips of cardstock in colors that matched the scene (Royal Velvet from Papertrey Ink, Orange Zest from Papertrey Ink, Sour Apple from My Favorite Things), before I mounted the scene on top using plenty of foam tape.
I stamped and white heat embossed the sentiment from the Itty Bitty Boos stamp set from My Favorite Things, added a few more layers of cardstock behind it for stability and dimension and finished off the card with a trio of acetate ghosts from the Candy Corn mix from Little Things from Lucy’s Cards.
Lots of Copics for this little scene.
As soon as I saw this stamp set, I knew these snow globes would make the perfect shaker cards. The stamp set comes with the snow globe and six different scenes you can stamp inside. I, of course, opted for the penguin, but there’s also a snowman, a car with a tree on the roof, a house, a tree with presents and a village, as well as a few sentiments.
I stamped and colored the empty snow globe on a quarter sheet of X-Press It blending card. I stamped the penguin on a separate piece of blending card and colored that for the inside of my snow globe. I glued a few Kort & Godt pearls around the penguin and put him aside while I worked on the rest of the card.
I cut the center out of the snow globe and adhered a piece of acetate to the back of the white cardstock, before adding foam tape on the back of the shaker area, making sure not to leave any gaps. With glitter inside the shaker window, you don’t want it to escape.
I put a mix of clear Distress glitter from Ranger and some micro beads inside the shaker area, before adding my colored penguin to the exposed adhesive of the foam tape to close the shaker.
I initially put too much inside (I always seem to put too much inside) and had to pour some out to get the perfect amount. I then adhered my popped up snow globe to a card base I created from Enchanted Evening cardstock from Papertrey Ink. I used the merry script die from Mama Elephant to cut the word merry three times from Blue Breeze cardstock from My Favorite Things, stacking the die cuts for a dimensional look. Near the bottom of the letters I softly ink blended a bit of Blueberry Sky ink from Papertrey Ink to add a little bit of a gradient. I stamped the word Christmas from the 
This is a fairly simple looking card, but it’s got tons of dimension and a shaker card is always fun, right?
Not a whole lot of Copics for this one. I did also use B90, which is a color I made myself using an empty marker, some B91 refill and blender refill.
I printed the image with a 10% opacity onto X-Press It blending card before coloring. Whenever I want to color things that are supposed to look close to white (ice, snow, polar bears +++), I prefer doing a no line version. To me, there’s something very distracting about black lines on an image that’s supposed to look white, so I prefer the softer no line version. I colored the image with Copics, starting with the sky, then ocean, ice floe, polar bear and finally the penguin and his little scarf. I prefer doing the black towards the end, it’s just good practice to avoid getting it into nearby areas where you don’t want it.
Once I finished the coloring, I die cut the panel using the second largest die in the A2 Stitched Rectangles STAX 1 set from My Favorite Things, before mounting it on foam tape onto a white card base I created from white cardstock from Papertrey Ink. I die cut the word klem (hug) twice from white cardstock using a die from Kort & Godt. It’s actually a Christmas die that says juleklem (Christmas hug), but by using only the latter part of the word, I have a completely different use for the die, which I love. That’s the whole card, I decided not to add any embellishments, I wanted to keep the focus on the image.
Loooots of Copics for this deceptively simple scene.
Using the Itsy Bitsy Polka Dot Backdrop die from Lawn Fawn, I die cut a panel of white cardstock from Papertrey Ink to add a little bit of texture to the front of my card. I adhered it to a quarter panel of Blue Breeze cardstock from My Favorite Things, before using the Selfie Square die, also from My Favorite Things, to die cut a window in the top center.
I put foam tape on the back of my polka dot panel and adhered it to my colored piece, making sure to line up the image so it would show trough the window the way I wanted it to. I then grabbed a quarter panel of Jalapeño Popper cardstock from My Favorite Things and used my G99 Copic marker and scribbled it close to the edge of the green cardstock to make the color match my car a little bit better. Green cardstock is tricky, and I don’t often find the right kind of green that I want for my projects. This was an easy hack, but if anyone out there has a suggestion for a green cardstock that is close in color to G99 (or G94), please let me know.
I adhered my improved green cardstock to an A2 top fold white note card and mounted the polka dot piece with the colored window using foam tape – lots of it. I then used the same Blue Breeze cardstock that I used previously to cut the word merry three times using the Merry Script die from Mama Elephant. I love their script dies! On the top layer I spritzed sheer shimmer craft spray from Imagine for a bit of sparkle to the letters. Unfortunately, details like that are tricky to photograph, but it’s definitely noticeable in real life, trust me 🙂
Onto a leftover scrap of X-Press It blending card, I scribbled an even layer of G99 to create a dark green cardstock that would match my colored image. Onto it, I white heat embossed the word 
I love my Copics and used quite a few for this rather simple image.
I colored up 
Once the coloring was complete, I used the largest die in the A2 Double Stitched Rectangles STAX die set from My Favorite Things to turn my panel into a rectangle with a nice faux stitch around the edges. I then added a thick layer of Glossy Accents to the heart and let that dry.
Using the Geometric Landscape stencil from Altenew, I ink blended a bit of yellow in the top right corner using Distress Inks in the colors Mustard Seed and Squeezed Lemonade, letting the lighter shade of the two fade to white. I then adhered my panel onto a top fold card base I created from Stormy Sea cardstock from Papertrey Ink.
I die cut the word wishes four times from the same color cardstock using a die from Mama Elephant. I stacked the die cuts for a dimensional look and adhered them on top of my ink blended section.
Using two stamp sets from My Favorite Things (Bitty Birthday Wishes and Itty Bitty Gifting), I heat embossed sub sentiments onto strips of Canyon Clay cardstock from Papertrey Ink. I die cut those using the Itty Bitty Strips dies, also from My Favorite Things, before finishing off the card with a few yellow enamel dots from the Pocketful of Sunshine pack of enamel dots from Altenew.
This was a fun color palette to work with, and I think the finished card echoes that. I’d say it’s my usual style of card, just not my usual color palette. I need to branch out more often, I had a blast using these colors.
There’s a stamp set in the release which includes a wreath and six different critters you can put inside, as well as a few individual stamps that go well with the wreath. I chose the wreath and the reindeer in the set for this card, making sure Rudolph was stamped a little crooked peeking into the front of the card from the side, I thought that made for a dynamic card design.
Using my Copics, I colored Rudolph and the wreath and also one of the smaller images, which I also fussy cut.
I trimmed my panel down so that it was 1/2″ more narrow than the card base and mounted it on foam tape onto a 4 1/4 x 5 1/2″ piece of Clover cardstock from Concord & 9th. They have the most gorgeous color range! Their cardstock isn’t very thick, so I don’t use it for card bases, but their colors are magical. This panel I adhered to a top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink.
I stamped a sentiment from the 
To finish off the card, I decided to add a layer of black glaze pen to Rudolph’s eyes. This makes them shiny and also adds a tiny bit of dimension. Once dry, I put a white dot in each eye using a 05 Gelly Roll pen. I also added Glossy Accents from Ranger to the berries and Rudolph’s nose for some extra shine.
Rudolph and his shiny nose say hi. It’s really shiny!
Fairly simple color palette. This card was so much fun to make, I love the playfulness of Rudolf with his head tilted in from the side of the card.
These penguins are about 4 cm tall, which makes them the perfect size to create gift tags from. By stamping them on a sheet of X-Press It blending card (or your cardstock of choice) with a little bit of space between them, you can die cut some and fussy cut the remaining ones. I decided to fussy cut the one in the center, while using dies for the other two.
I colored all the penguins with Copics and used a black glaze pen to create a little bit of shine and dimension to their eyes. Once the black was dry, which didn’t take long, I used a white Gelly Roll 05 on top of the black to put the white back into their eyes.
I’m starting with this fussy cut penguin. In a drawer, I had a scrap of a snowy background that I created last fall using Rustic Cream cardstock from Papertrey Ink, the Falling Snow stencil from Simon Says Stamp, modeling paste from The Crafter’s Workshop and Rock Candy distress glitter from Ranger. I decided to put it to use and die cut it using the 210 die from Kort & Godt, I really like the heart shaped hole it creates at the top. I mounted the penguin using foam tape and added a sentiment strip below. The sentiment is from the 
On the back, I added die cut letters to spell the words to and from. The words are from the Tag Builder Blueprints 6 die set from My Favorite Things, die cut from Amarena Cherry cardstock, also from MFT.
Simple color palette for this one.
Next up is the circular tag. I used the Tag Builder Blueprints 6 die set for this one as well, as well as another sentiment from the Christmas Greetings stamp set from LOTV. I added Divine Twine in the color Cherry to the top, a bell charm and a few red enamel dots from Papirdesign to finish it off.
A few additional colors for this one, I wanted to ground my penguin and also needed some color on that candy cane.
For the blue one, I used the Fold-Up Tags die set from My Favorite Things to create my tag. I made sure not to cut off his scarf by fussy cutting that and putting it behind the die as I ran it through my die cutting machine. I used a piece of Blue Breeze cardstock from My Favorite Things to create the reinforcing element near the top, added some Divine Twine in the color Blueberry, a couple of white bells from UiT Hobby and some thread that’s actually meant to use with a loom (it’s super strong). Once again, I used the Christmas Greetings stamp set for the sentiment, and scattered a few snowdrift sprinkles from Little Things from Lucy’s Cards to finish.
On the back, I used that same die from the Tag Builder Blueprints 6 die set from My Favorite Things that I used for the other two tags, this time die cut from Enchanted Evening cardstock from Papertrey Ink.
Once again, simple color palette. These were such fun to make. I want to make more, and have a bunch on hand when it’s time to wrap Christmas presents, so I’m not rushing last minute to get the tags done.
I colored my scene with Copics on X-Press It cardstock and fussy cut right up against the black lines. This image has very simple outlines, making fussy cutting a cinch.
I covered the entire colored panel with sheer sparkle craft spray from Imagine, it adds so much sparkle, which unfortunately is hard to capture in photos. It’s there in real life, though, trust me. I glued my colored piece onto a thicker white cardstock, both for a bit of stability and to hide the back of the colored panel. Copics bleed through to the back (you want that, it’s actually a sign that you’re using a good cardstock for Copic coloring), and I usually add my panels to card bases, but this one was different. I scored the white cardstock at the bottom and glued the back flap to the back bottom of an A2 card base I created from Lovely Lady cardstock from Papertrey Ink. With hidden magnets between the layers of the card, it stays shut and doesn’t fall open.
You can see some of the shimmer in this photo, a couple of big droplets fell on the mushroom and the rainbow. I added pearls from the Igloo mix from Little Things from Lucy’s Cards for the mushroom, and used a black glaze pen from Sakura to make the eyes stand out.
Lots of Copics for this one.
