Hi, crafty friends. I’m back today with another card featuring one of the cute images from Rachelle Anne Miller. This time it’s Kitty Love, and who doesn’t love a litter of kittens? I grew up with cats, and they’re the absolute cutest.
I colored the image with Copics and fussy cut around it, leaving a white border. This image is pretty easy to fussy cut, so it didn’t take long. I’m trying to get out of my standard “full panel with cluster” mode, and fussy cutting the image gives me endless possibilities.
I needed something in the background behind my image, and decided to create a circle stencil to ink blend into. I used Distress Ink from Ranger in Abandoned Coral, Spiced Marmalade and Squeezed Lemonade, before I removed the stencil and looked through my stash of background stamps I could use to add some more interest. I wound up with a mixture of stamps from Inkido, Tim Holtz and My Favorite Things, and used Distress Ink once again for the stamping. This time Spiced Marmalade and Mustard Seed for a bit more of an intense yellow on top of the ink blending.
I mounted the image using foam tape, and die cut the word happy from the Bold Happy Birthday die set from My Favorite Things. I die cut four of each letter and stacked them for a dimensional look, overlapping them on my card to make them fit.
I stamped and white heat embossed a sentiment from the Anything-but-Basic Birthday Wishes stamp set from My Favorite Things onto a piece of Caribbean Sea cardstock, also from MFT. The sentiment actually says Commencing Happy dance, but since I already had a diecut happy, I only needed the first and last word for my card. I added three additional strips of cardstock behind the words for dimension, and finished off the card with a few enamel dots. The teal ones are from the Cool Summer Nights pack from Altenew, the orange ones from a Halloween pack from Papirdesign. I also added a dot of black Glaze pen to the kittens’ eyes and the boy’s eyes, then a white dot using the Gelly Roll 05 from Sakura once the black had dried on the boy.
Fairly simple color palette for this one.
I colored the image with My Copics and decided to fussy cut around it this time. I tend to turn my colored pieces into panels for my card and work from there, but I wanted to do something a little different today.
I left a white border around the image to make it easier on myself. You tend to lose some of the details in the hair if you cut up close to the line, and I wanted to keep the hair intact. I also added Glossy Accents to his glasses for shine and a touch of dimension.
I wanted to include his name on the card, but had printed my image fairly large. My solution was to make a landscape A7 card (7×5″). I rarely make landscape cards (trickier to photograph) and the same goes for A7, but it’s fun to shake things up. I also shook things up by adding cardstock strips going across the card. I tried with cool colors first, but the image got lost, so I went through my solid colors of cardstock again and made a version with warm tones. From top to bottom they are:
I used the Impact Alphabet die set from My Favorite Things to spell the name. I die cut four of each letter and stacked them for a dimensional look, gluing them right onto the stripped background, before adding the sentiment and date in white on black.
I mounted the image on foam tape and added a few enamel dots from Altenew (teal dots from the Cool Summer Night pack) and Papirdesign to finish the card.
I colored the donut with my Copics and fussy cut it, leaving a thin white border around the edge. I printed a panel of several donuts in light gray for a bit of added interest in the background, popped up my panel onto a card base I created from Rustic Cream cardstock from Papertrey Ink, while I worked on the rest of the card.
Using the Parker alphabet die set from Memory Box, I die cut the letters to spell sweet from Grapesicle cardstock from My Favorite Things. I stacked six of each for a dimensional look.
I stamped and white heat embossed partial sentiments from the Itty Bitty Basics and Itty Bitty Gifting stamp sets from My Favorite Things to complete my sentiment, adhered it all to the card and finished with a few sequins from the White Orchid Sequin mix from Little Things From Lucy’s Cards.
Soft pastels were all I used for this one. It’s a little different for me.
I colored my image with Copics, before using one of the stitched rectangle dies from My Favorite Things to create a nice faux stitching detail along the edges of the panel. I then sprinkled on a generous amount of chunky white embossing enamel from Stampendous and melted the granules from the back of the panel.
I created a card base from Vintage Timber cardstock from My Favorite Things and mounted my colored panel in the center using foam tape. Using the Believe die from Simon Says stamp, I die cut four white believe that I glued together for a stacked look and added one more on top that I colored with blue Copics (B91 and B0000) before die cutting. It gives the word a little bit of added interest. I stamped and white heat embossed a sentiment from the Holiday Messages stamp set from Mama Elephant onto Wild Cherry cardstock from My Favorite Things and cut the sentiment down to strips, adding a few extra layers of cardstock behind for dimension and strength.
I have a coloring/card making buddy in Liz Vefall and sometimes ask her for suggestions when I’m stuck and/or can’t make up my mind. I always run with her ideas and the cards usually end up looking great, but I seem to have lost the ability to turn her suggestions into a final product that I’m happy with. The black pants and the brown card base were both suggestions from her, and I’m not comfortable with the end result, somehow. Diecutting the white word with a little bit of blue at the bottom was also her suggestion, and I wound up loving that, so I ended on a positive, at least
Fairly standard Christmas color palette, with a couple of odd ones thrown in there for good measure.
Cue 
I’ve always been a fan of creating blue Christmas cards, but in the past couple of years, green has grown on me, and I think I made more green Christmas cards this year than blue ones. It helps that I’ve found a green Copic combo that I really like.
When all the coloring was done, I stamped and white heat embossed a sentiment from the 
Lots of Copics for this one.
I used a white Gelly Roll 05 pen to create the white dots on the deer, and a die from the A2 Stitched Rectangles STAX 2 set from My Favorite Things to create the faux stitching on the edges of the panel. By not stamping the entire deer, it creates a dynamic effect of having it walk in from the edge of the card.
I stamped a sentiment from the 
The pink and blue green color combination is definitely not traditional for Christmas, but I kind of like it. What do you think, does it work?
Quite a few Copics for such a simple card.
This image is 
I have a tall pine tree outside my craft room window. In it, there’s a huge nest that magpies built a few years back. One morning last week, I heard the magpies making more sound than usual. When I looked outside, there was a squirrel that had taken over the nest. It was adding one twig after another to the nest, I guess it had evicted the magpies. After quite some time, one of the magpies tried to get back in, but was chased away by the squirrel. I must admit I was delighted, I’d much rather have a squirrel outside my window than magpies. The squirrel is much cuter, and it’s a lot quieter too.
Back to the card. Once I finished the coloring, I stamped the word Christmas from the Christmas Greeting stamp set that Lili of the Valley released earlier this year using Jalapeño Popper ink from My Favorite Things.
I then die cut the panel using the second larges die in the A2 Stitched Rectangles STAX 1 die set from My Favorite Things and adhered it directly to a card base I created from Jalapeño Popper cardstock, also from My Favorite Things. On a scrap piece of cardstock the same color, I stamped and white heat embossed the words cosy and wishes to complete my sentiment. I put a couple of additional layers of green cardstock behind each word for a little bit of added dimension.
I added a few sequins from the White Orchid Sequin Mix from Little Things from Lucy’s Cards to finish off this very simple card. A little bit of shine is never a bad idea on a simple card.
You’d think an image this simple would have less Copics used, but I tend to go overboard on snow. This time I also went overboard on the fur, even though it might not look like it.
I had my penguins colored, fussy cut and ready to go. I rummaged through my Christmas themed patterned paper scraps and found a piece from Papirdesign and one from Maja Design that were just big enough to die cut a snowflake from. This snowflake is the Stitched Snowflake Frame from Lawn Fawn that came out last year. I added a white die cut circle to the back of the opening that the die creates and stamped a to/from stamp on the back.
I added the penguin using foam squares and also a white heat embossed sentiment strip. The sentiment is from the Jul stamp set from Norsk Stempelblad. I stamped and white heat embossed a bunch at once on a scrap piece of blue cardstock from Maja Design. I added my strip using foam squares and finished off the tag with a few sequins from the Igloo mix from Little Things from Lucy’s Cards and a bow I tied to the top using Divine Twine in the color Blueberry.
I used the same setup for the second tag, only switching out the sentiment and using pearls instead of sequins. They’re from the same mix from Lucy, though.
I love using 1 mm foam squares. It adds a little bit of raised dimension to something that is very simple, and the bow adds a little bit of texture.
Simple color palette for these two (and the other two penguins that are still lost somewhere in my craft room).
I thought this guy from the Smile and Wave stamp set was too cool not to use, so I colored him with my Copics and did some fussy cutting, leaving a white border around the edge. I wanted him to stand out and to make a super simple card.
I created a mask with some 2″ post-It tape by cutting a sloping hill with a craft knife. This is easy to do free hand, but you can use a curved die if you’d like.
I wanted this guy to really stand out against the background and decided to ink blend using distress inks. I used Abandoned Coral, Worn Lipstick, Spiced Marmalade, Mustard Seed and Scattered Straw for the sky. The yellow and orange tones pick up the colors from his belly, beak and feet and really stand out against the blue of his hat. For the ground I used a little bit of Tumbled Glass Distress Ink near the horizon, fading into white near the bottom.
I sprinkled on Chunky White embossing enamel to the background, making sure no granules covered my stamped sentiment before melting the granules from the back. I mounted the panel onto the white top fold card base using foam tape for dimension.
I mounted the penguin onto foam tape and used some clear iridescent crystals from the Crystal Collection (Glass) from Little Thing from Lucy’s Cards to finish off this very simple card.
Simple color palette.
I thought the ghost stamps in the 
I colored the ghosts with Copics, and used a yellow and a grey marker to color the windows. Most of the rooms have the lights on, but by coloring two windows grey, it gives the illusion that the lights aren’t on in those particular rooms. I also used the grey to add a silhouette of a person in one of the lit rooms, upping the creep factor a tiny bit.
I masked off the ghosts and the house before I ink blended the nighttime sky. I used Eiffel Tower ink from My Favorite Things as well as Distress Inks in the colors Chipped Sapphire, Faded Jeans and Stormy Sky. Evidently, I’d used the paper I laid down to do my ink blending on to catch overspray from another project I added shimmer to, so the sky has a subtle shimmer to it when you tilt the card in the light. Completely unintentional, but not the worst thing in the world. My ink pads are now a little shimmery too, but it’s not too bad.
I decided to also add an acetate ghost outside the top window of the haunted house. The ghost is from the Candy Corn mix from Little Things from Lucy’s Cards.
I added my panel to a piece of white cardstock, and then adhered everything to a card base I created from Orange Zest cardstock from Papertrey Ink.
Very simple color palette for this one.
Papirmølla 