Hi, crafty friends. Today I’m sharing with you a fairly simple birthday card featuring this cute puppy from the Spring Farm digi release from Lili of the Valley. This guy’s from the puppy set.
I colored him in very simply with just a few Copics, hinted at a sky behind him and grass below him using some very soft colors, trimmed my panel down and put it aside while I worked on the rest of my card.
Using Spring Moss cardstock from Papertrey Ink and the By the Numbers impression plate, also from PTI, I created a soft, yet textured background that I adhered to my top fold A2 card base created from Stamper’s Select White cardstock from Papertrey Ink. I love their white cardstock, it’s the whitest I’ve found, and it’s thick and wonderful to work with.
I glued a strip of silver glitter cardstock above and below my little puppy, before mounting it on foam tape on the top half of the card.
I die cut Gratulerer using the Gratulerer 6 die from Papirdesign three times: two from white cardstock, once from the silver glitter cardstock I’d already used. I stacked these for a little bit of dimension. I stamped a sentiment from the A06 stamp set from Norsk Stempelblad AS onto a piece of Pale Peony cardstock from Papertrey Ink using VersaMark ink, then heat embossing using clear embossing powder from Ranger. I added two more layers of pink cardstock behind it so it’d be flush with the die cut word above it.
To finish the card I added a few Sparkling Clear sequins from Pretty Pink Posh. These might be my favorite sequins, and I’m almost out of them, so I’m desperately searching for new ones. They seem to always be sold out.
Very soft and simple color palette used for this card.
This bunny is the Clover Bunny from the newly released 
Once my image was colored, I decided to turn this into a very simple card by adding a frame around it and not much else. Using Fire Coral cardstock from My Favorite Things along with the largest die in the A2 Stitched Rectangles STAX 2 Set and the Selfie Square die, both of these also from MFT, I created my frame.
I used the Circular Lace Stencil from Simon Says Stamp with Fire Coral ink from MFT onto the Fire Coral cardstock for a little bit of subtle interest to the background.
Next to the bunny, I stamped a sentiment from the Scripty Bday stamp set from Mama Elephant using Fire Coral ink once again. I love it when everything matches on a card.
I added foam tape behind my frame and adhered it all to a top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink. I added a bit of clear Wink of Stella to my “flower”, but decided not to add any embellishments. Super simple, right?
The color palette is even super simple. I rarely use as few colors as this.
I colored the scene in using my Copics, before using Iceberg ink from Altenew with the Slimline Cloud Edges stencil from My Favorite Things to create soft clouds in the background. I then sacrificed one of my stamp storage pockets from Avery Elle, using about half of it for this card to create the pocket for the colored panel to slip into. I know there are full shaker covers on the market, but I don’t have any, and the storage pocket was easy enough to alter.
I filled my shaker pocket with sequins and gems from the Candy Corn mix from Little Things from Lucy’s Cards. This is a great Halloween mix with clear, yellow and orange sequins, as well as some little gems and even acetate ghosts. I loooove the ghosts, but of course I removed them from the part of the mix I used for this birthday card.
I die cut the word Gratulerer twice from white cardstock and once from Pure Poppy cardstock from Papertrey Ink using the Gratulerer 8 die from Papirdesign, stacked them and used liquid glue to add the die cut to the front of the window.
I stamped a sub sentiment from the Go’klem stamp set from Norsk Stempelblad AS onto a separate piece of Pure Poppy cardstock using VersaMark. I heat embossed it using super fine detail embossing powder from Ranger in white, cut the sub sentiment down to a strip and added a couple of additional cardstock layers behind it, before adhering it to the front of the shaker using score tape.
Simple, but fun color palette for this one.
I printed the dragon on a piece of X-Press It blending card and colored him with my Copics, before using the largest die in the A2 Stitched Rectangles STAX 1 die set from My Favorite Things. I covered my card base with a 4 1/4 x 5 1/2″ piece of patterned paper from Kaisercraft (Charmed from the Key to my Heart collection) to match the green. I cut the panel with the dragon at funky angles at the top and left side to create a convex quadrilateral that I mounted on foam tape in the top left corner of the card.
Using a scrap of patterned paper from the Fremtidsdrømmer collection from Papirdesign, I die cut Gratulerer using the Gratulerer med dagen 3 die set, also from Papirdesign. I die cut an additional 3 layers of white cardstock to glue behind it, but decided that even that wasn’t enough dimension, so I cut tiny slivers of clear foam tape from Rabbit Hole Designs to add to the back of the letters. That did the trick, and it looks like the die cut is floating. I stamped a sub sentiment from the A06 stamp set from Norsk Stempelblad AS onto another piece of the same patterned paper using Jalapeño Popper ink from My Favorite Things, cut it down to a strip, added a couple of white cardstock strips behind it and more of the clear foam tape to make it float, before finishing off the card with a few enamel dots from the Pocketful of Sunshine pack from Altenew.
Fairly simple color palette, but I went through too many teal colors before I decided on the right one for the straws and the sprinkles.
The stamp actually comes with all the candles in a row, but for this design I wanted to shake things up a bit. I colored my candles in a bit of a rainbow order and used a lot of candles (I printed the whole row of candles three times). After they were all colored came the fun part: fussy cutting.
I don’t normally mind fussy cutting, I find it relaxing, but these candles are tiny and there are plenty of them, so it took a while. Well worth it, though. I prefer cutting right against the black lines of the image when I fussy cut, and that’s what I did here, for everything but the wick of the candle, which has a bit of white showing on either side.
Using clear foam tape, I mounted each of the candles onto a panel I created from Soft Stone cardstock from Papertrey Ink. I then mounted that panel onto my card base, which I created from Stamper’s Select White cardstock, also from PTI. I love the cardstock from Papertrey Ink, it’s my favorite!
Using the Happy Birthday die from My Favorite Things, I die cut the words three times from True Black cardstock from Papertrey Ink and the shadow twice from 40 lb vellum from Bazzill. I stacked the black cardstock and covered my layered die cut with VersaMark ink, then sprinkling on Super fine detail black embossing powder from Ranger and heat set. I don’t usually use black embossing powder, it tends to create a mess, but to create shiny die cuts like this, it works great. I repeated the embossing process a couple more times to make it extra shiny and glossy and even.
Before die cutting the vellum, I put a piece of adhesive sheet on the back of one, so I’d be able to glue them together without any adhesive showing. The trick with adhesive and vellum is to have an even layer on the back, whether it’s liquid glue or another type of adhesive. Of course you can add your adhesive in strategic places behind the vellum or put embellishments on top, but I didn’t want to have to think about that for this card, and doubling up the vellum makes it a little less transparent and it stands out more against the colorful candles behind it. I actually didn’t put any embellishments on this, I thought there was enough going on with all the candles and dimension already there.
Lots of colors for this. Three colors in most of the combos, some use four. Yes, I go overboard, I’m aware 😉
I actually made this card for my dad, whose birthday was last week. He loves his cakes and desserts, and has a stationary bike that he works on on almost daily (while watching police car chases on YouTube; no joke), and I thought this image would be perfect for him, with the little bear on his bike and the cupcake trailing behind. I colored the image with my Copics and used the Stitched Mini Slimline STAX die set from My Favorite Things to turn it into a panel that would fit nicely on a mini slimline card. I then die cut the letters to spell HURRA three times from Jalapeño Popper cardstock from My Favorite Things and stacked them for a dimensional look, before deciding that the green was too dark. I didn’t want to start over, so I using the same dies (the Connected die set from My Favorite Things), I cut an additional layer from Parsley cardstock from Concord & 9th and glued that on top of the dark green. I like the lighter green better.
I adhered my panel to a card base I created from Blueberry cardstock from My Favorite Things. I added Glossy Accents to the hearts in the image, stamped a sentiment from the A06 stamp set from Norsk Stempelblad AS using Jalapeño Popper ink from My Favorite Things and added a few more strips of cardstock behind it for dimension. I finished off the card with a couple of enamel dots from Papirdesign.
I probably used way more colors than I really needed for this card. Three colors for that cherry is kind of ridiculous, it’s not that big, but that’s kind of what I do – I really love my Copics.
I colored my image with Copics and put it aside while I worked on the rest of the card, which I kept fairly simple. I used the largest die in the A2 Stitched Rectangles STAX 1 set from My Favorite Things in combination with the Watercolor Wash Free Form die, also from MFT, to die cut a window from Bright Buttercup cardstock from Papertrey Ink. I adhered the image to the back of this window and adhered it to my card base, which I made from Stamper’s Select White cardstock from Papertrey Ink.
I die cut the Celebrate die from My Favorite Things twice from white cardstock and once from a silver sparkle cardstock and adhered them together for dimension. I also stamped a sub sentiment from the Itty Bitty Birthday stamp set from My Favorite Things onto Hibiscus Burst cardstock from Papertrey Ink and heat embossed it, before using a banner die from the Everyday Gift Box die set from My Favorite Things. I put a couple of additional layers of pink cardstock behind it, adhered it on top of the stacked Celebrate die cut and embellished the card very simply by putting two star enamel dots in spots that have stars in the stamp. Simple, right?
Quick and easy coloring with a fun, summery color palette (it’s been snowing and sleeting and freezing here, which makes me long for summer even more than usual).
I colored in the image with my Copics, used the second largest die from the A2 Stitched Rectangles STAX Set 1 die set from My Favorite Things to create the wonderful stitching on the border of the colored piece and adhered it to a card base I created from Harvest Gold cardstock from Papertrey Ink. I clear heat embossed the Happy Birthday background stamp from MFT on the card base. I stamped a sentiment from the Scripty Bday set from Mama Elephant in VersaFine Onyx Black ink and clear heat embossed, turned it into a circle using a nesting die and adhered it to the card using foam tape, before finishing off the card with a few Sparkling Clear sequins from Pretty Pink Posh.
I love this image, and I went with bright, bold colors for my Copic coloring, before using the largest of the Wonky Stitched Rectangle STAX dies from My Favorite Things to create some interest to the edges of the panel.
I wrapped some Green Apple twine around my panel twice and tied a knot, and adhered the panel to a card base I created from Sour Apple cardstock from My Favorite Things. The twine adds a little bit of dimension behind the panel, so I put some extra layers of cardstock and some foam tape behind it to make the layer even.
I stamped and white heat embossed a sentiment from the Mini messages stamp set from Mama Elephant on a scrap of black cardstock from Papertrey Ink and die cut it with a circle die from Lifestyle Crafts. I adhered the circle on top of the knot of my twine and put a double layer of foam tape behind it for extra dimension.
I added Nuvo Jewel Drops in the color Key Lime to the green sprinkles. It doesn’t show up very well in the photos, but it adds a little bit of shine and dimension in real life. Using Sour Apple ink from My Favorite Things, I stamped the Number Jumble background stamp from My Favorite Things to the flap of the envelope, which is a Limelight envelope from My Favorite Things.
Bright, happy colors for this one. I hope you have a great weekend!
Isn’t this bunny looking up at the moon and the stars so adorable??? I decided to create a birthday card, and made it very simple with a digital watercolor background, a couple of die cuts and a button. You really don’t need much with images as great as this.
I colored the bunny and the number with my Copics, before using the largest of the A2 Stitched Rectangles STAX dies from My Favorite Things to create a faux stitch around the edge. From Autumn Rose cardstock from Papertrey Ink, I die cut the word HURRA four times using a die from Kort & Godt. I added my panel to a card base I created from Papertrey Ink Autumn Rose cardstock, added my stacked die cut below the image and used a paint brush with sheer sparkle shimmer spray to add some sparkle to the die cut letters, as well as the moon and the number itself. It doesn’t show up in photos very well, but is very sparkly in real life. I also added a Kort & Godt button that I had in my stash, and my card was finished.
Not a lot of Copics for this one, it’s a simple image.
Papirmølla 