Hi, crafty friends. There’s an IG hop today to celebrate the launch of the Streamside Studios website. Shawne’s been selling her photopolymer and digi stamps on Etsy for a while now, but now she has her own website (she has embellishments, just sayin’), and we’re celebrating with an instagram hop.
I’ve made a cool card (pun intended) with the Ice Cream Critters stamp set. I chose three of the popsicles in the stamp set and colored them with my Copics before fussy cutting them, leaving a thin white border.
Using the Watercolor Wash Free Form stencil from My Favorite Things along with Icy Water and Frayed Leaf inks from Altenew, I did some very soft ink blending to create a little bit of interest to my background. I then ran the panel through my printer to add the sentiment, chopped off a little on each side of the panel and mounted it onto a top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink.
I put foam tape on the back of each of my popsicles and adhered them above the sentiment.
I finished off the card with pearls, crystals and dew drops from the Fresh Mint mix from Little Things from Lucy’s Cards.
Soft color palette for this one.
Meet 
I paired them with sentiments from the 
There are some differences between these. Kale is stamped and colored on the tag, while Flo is fussy cut and popped up. I used similar techniques for the background, but kept a lot of the same elements across both tags.
For Kale, I masked him off and ink blended around him using Coral Bliss and Pink Pearl inks from Altenew, as well as Scattered Straw Distress ink. I used the largest die in the Stitched Traditional Tag STAX set from My Favorite Things to turn him into a tag and then used the Falling Snow stencil from Simon Says Stamp with Light & Fluffy Modeling Paste from The Crafter’s Workshop to create snow coming down. I used Snowfall Grit-Paste from Ranger at the bottom of the tag and sprinkled on Rock Candy distress glitter before the paste dried. I then added a snowflake charm and some ribbon at the top of the tag and tied it together with Cotton Candy twine from Whisker Graphics.
On the back of the tag I did soft ink blending using the same colors and stamped a to/from stamp from the B06 stamp set from Norsk Stempelblad AS using Coral Bliss ink from Altenew.
Not a lot of colors used for this adorable bunny.
I used the same tag die, stencil, paste and inks for blending on this tag, but decided to add a little extra. I die cut the Silhouette Snow Trees from Mama Elephant from Stamper’s Select White cardstock from Papertrey Ink, and on the trees I added Grit-Paste and Rock Candy Distress Glitter.
I let the trees dry, used liquid glue to adhere them to the tag and added Flo on top using foam tape.
I also used foam tape on the back of the speech bubble and used ribbon, a snowflake charm and some twine at the top for this one too.
Another stamp from the B06 stamp set from Norsk Stempelblad AS on the back of this one.
I used very bright colors for Flo.
My original plan was to color in their accessories in a peachy pink color and a dark green combo that I love for my Christmas cards. There’s usually a lot of detail to the Lili of the Valley accessories (stripes and dots), making it easy for images to look messy if you choose too many colors. I tend to opt for a lighter and darker version of the same color, which makes it better for the eyes. Once I’d done the peachy pink, I went in with the lighter of the greens, because I didn’t know how dark I wanted it. When the light green was in place, I realized I really liked the light color with the pink, so I decided not to add too much of the darker greens.
Once the coloring was complete, I used the largest die in the Wonky Stitched Rectangle STAX set from My Favorite Things to turn it into a panel with a fun faux stitch edge. I then used Winter Lake, Icy Water and Polar Bear inks from Altenew to ink blend a soft sky from the top, before sprinkling on Chunky White embossing enamel from Stampendous and melting the granules from the back of the paper with my heat gun.
I adhered the panel to a top fold card base I created from Berry Sorbet cardstock from Papertrey Ink. From Grapefruit cardstock from Condord & 9th, I die cut the oh so merry from The Penguin’s Waddle die set from Mama Elephant. I cut three and ink blended on the bottom using Berry Sorbet ink from Papertrey Ink, before stacking them together for a dimensional look and adhering them to the card. I finished the card with a few Coral Heart droplets from Little Things from Lucy’s Cards.
I realize now that the green mitten probably belongs to the snowman on the far left, which means I should have colored it pink. Oh well, next time. The faux stitching, the snow and the ink blend on the letters add a bit of texture and detail to the card without adding bulk. Of course, I love my dimension, so I layered up the die cuts and added the heart droplets, but this card is still fairly mail friendly, I’d say.
The cardstock from Concord & 9th, which is what I used for my stacked sentiment, is not a very thick cardstock, so it’s great to use if you don’t want too much dimension on your cards. I just really wanted that color, which is why I chose it, but it also die cuts really well.
Last, but not least, my color palette. I still go overboard when I color snow, I have a feeling that won’t ever change.
I colored the image and fussy cut it right up against the black lines. When you do, you lose the cute little extra lines on the outside that is part of Rachelle’s signature, which is a bit of a shame, but for the card design I had planned, it was a necessary sacrifice. I could have kept a little white trim (and thus, the wispy lines) around the image, but I feel that would have made the image less of an integrated piece of the overall design, so I went with the close cut.
Onto the card base, I ink blended Icy Water and Winter Lake inks from Altenew to create a soft blue sky. I die cut the Winter Forest cover die from Mama Elephant from Heavyweight vellum from My Favorite Things and adhered it on top. Using the same die, I also die cut the background from a couple of colors of gray cardstock. I used Mushroom from Concord & 9th and Soft Stone from Papertrey Ink and adhered the little gray notches into the openings of my vellum trees. On parts of the lighter ones, I ink blended with Charcoal ink from Hero Arts for a little variation in my grays.
I adhered my little scene on top of the vellum trees. I glued it flat down on the edges and used 2 mm foam squares near the top of the image for some dimension. I used a black glaze pen to add some shine to their eyes, and added a white dot on top once the black was dry using a Gelly Roll 05.
I die cut the Winter Forest cover die one final time, this time from white cardstock. I cut away the trees, but kept the frame and slope near the bottom and stamped a sentiment from the Together stamp set from Purple Onion Designs using Gravel Gray ink from My Favorite Things.
This image is so sweet and can be used for a variety of occasions. Rachelle’s images always have such a cosy vibe, and this one fits perfectly with all the other images she’s illustrated.
I see I’ve forgotten to add the greens I used in my Copic graphic. They were YG17, YG03, YG01 and G40.
I stamped Mimi using Extreme Black ink from My Favorite Things, colored her with Copics and stamped on top using Obsidian ink from Altenew, which is a super crisp pigment ink that doesn’t play well with alcohol markers, but is perfect for stamping at the end after the coloring’s done. I fussy cut her leaving a white trim, and put her to the side while I worked on the rest of the card.
I chose one of the green papers in the Watercolor Wash 6×6″ paper pad from My Favorite Things to cover the front of a landscape oriented top fold A2 card base I created from Stamper’s Select White cardstock from Papertrey Ink. I cut down a white piece of cardstock and created texture using the Crystal Distortion embossing folder from Simon Says Stamp, before mounting the panel in the center of the card front using lots of foam tape.
I then used the Stitched Happy Birthday Rectangle die from Memory Box to die cut once from the green patterned paper I’d already used and 10 or 11 times (I lost count) from white cardstock to create a shaker well. I cut the words out of the white frames, stacked them, added acetate to the back of my layered frame and adhered it in the center of the card. I then filled the shaker well with the Candy mix from Little Things from Lucy’s Cards. This mix has pearls, little flower shapes, sequins without holes, some hearts and raindrops. I topped it with another piece of acetate, then adhered the patterned paper die cut on top.
By creating the well from so many layers of cardstock, my little embellishment mix has a lot of room to shake around. A few of the pieces in there are quite large, and I didn’t want any of them getting stuck.
I added Mimi to the side of the frame. I put three layers of foam tape behind her for dimension, so she’d be level with the frame. This card has a lot of dimension, it’s almost 1/2″ at its thickest.
Simple color palette for Mimi, she’s pretty quick to color.
This is the card closed. I created this by gluing 2 side fold A2 card bases together; the half with the snowman with the fold on the left and the other one with the fold on the right.
I used the Snowflake Confetti fancy die from Hero Arts to die cut from Gina K Masking Magic to create a stencil to ink blend through. I used Iceberg ink from Altenew to create subtle blue snowflakes in the background on the front of the card to the left of the snowman and also on the other flap.
I adhered an 1/8″ gold glitter cardstock strip from Kort & Godt for the snowman to hold on to for a defining edge and used the Stacked Merry die from My Favorite Things to die cut 6 times for a stacked look. 5 layers from white cardstock, the top layer from a piece of X-Press It blending card that I colored to match the green on the snowman. I stacked the six layers and adhered them in the center of the left front panel, stamped and white heat embossed a sub sentiment from the 
I embellished with a combination of gold pearls around the sentiment and tiny confetti stars all across the background. Both are from the Vanilla Kiss mix from Little Things from Lucy’s Cards. I also added a bit of black glaze pen to the eyes of the snowman. It adds a tiny bit of dimension and some shine. Once dry, I went over with a dot of white, using a Gelly Roll 05.
On the inside flap, behind the snowman, I stamped another sentiment from the Christmas Greetings stamp set from Lili of the Valley, this time using Jalapeño Popper ink from My Favorite Things.
Simple color palette for this one. Lots of colors for the snow, though, I can’t seem to help it.
I colored up these two sloths from the Hang Out and Celebrate stamp set. I stamped using Extreme Black ink from My Favorite Things, which is a hybrid ink safe to use with alcohol markers. I colored the sloths with Copics, then re-stamped over the black lines, this time using Obsidian ink from Altenew. This is a pigment ink that is super crisp, but it’s not compatible with Copics, so I need to stamp with an alcohol friendly ink first, do my coloring, then stamp on top with the pigment ink. Once the ink was dry I used the coordinating dies to cut out these cute sloths.
I created an A2 top fold card base from Stamper’s Select White cardstock from Papertrey Ink and decided to do a little ink blending near the top right. Using the Watercolor Circle stencil from My Favorite Things (which was also new in the July release), I ink blended Eastern Sky and Iceberg inks from Altenew to create a soft sky. I eventually realized it needed to be darker for my clouds to show up over top, so I also went in with Ultramarine, which is one shade darker than Eastern Sky. These three blues are all in the same color family from Altenew.
With the circle mask still in place, I added the Tiny Clouds stencil from My Favorite Things on top, and used Fresh Snow hybrid ink from Papertrey Ink to create soft clouds on top of the blue I’d already ink blended.
At the bottom center of the card, I stamped a sentiment from the stamp set with the sloths, this time using Caribbean Sea ink from My Favorite Things. I also stamped “Make a” from the older Birthday Chicks stamp set and adhered die cut letters between my stamping to complete the sentiment. I die cut the word with from the Wish Big Today die that also came out in the July release from My Favorite Things (it was such a good release). I used Sour Apple cardstock, and at the base of the letters I ink blended using Sour Apple ink, and a little bit of Jalapeño Popper ink for extra oomph. I put three additional die cuts behind each letter and adhered them to my card.
Time for the sloths. I die cut three additional layers of cardstock to go behind each of my die cut sloths, and glued them directly to the card base. I cut off a portion of the balloon on the back layers, so I could overlap the colored one with the other sloth. I added a dot of black glaze pen to the eyes of the sloth that’s awake, and Glossy Accents to the balloon for a bit of shine.
To finish off the card I used some sequins from the Waterfall mix from Little Things from Lucy’s Cards. I packed a lot into this card, and the sentiment wound up taking much more space than I’d sketched out in advance, but I still like it. This is the part where I usually show a graphic of the Copics I used, but I simply can’t locate the post-It I used to write them down.
I started by stamping this bird on a piece of X-Press It blending card using Extreme Black ink from My Favorite Things. I colored the bird to look like a bullfinch using my Copics. In this little corner of the world, no bird says Christmas like a bullfinch. Once I finished my coloring, I stamped on top of my initial stamping, this time using Obsidian ink from Altenew to get really crisp lines. I love how crisp this ink is. It’s not compatible with Copics, so I need to stamp after my coloring’s complete, but that’s not a problem with a stamp positioning tool.
Onto a piece of Classic Kraft cardstock from Papertrey Ink, I stamped a few branches using Classic Kraft ink for a soft backdrop for my sentiment, which I stamped in Dark Chocolate ink, also from Papertrey Ink. I popped up the 3 1/2″ wide kraft panel in the center of a top fold white cardbase using foam tape, added foam tape behind my die cut image and placed it near the top center of the card, before finishing off with a gold heart for a little bit of embellishment.
Simple color palette for this image.
Hot pink and orange/yellow/gold. It’s not a Christmas color palette you see every day, and when I did the actual coloring, I wasn’t sold on this. I wasn’t sold when the card was done, either, but it’s grown on me, and I’m now in a place where I like it. That might change again, though, ask me tomorrow 😉
I printed the image on the bottom half of a quarter sheet of X-Press It blending card, did my coloring, then used the Basket Weave stencil from My Favorite Things to add a little bit of interest to the panel. Above the image, I used Puffy Heart and Rose Quartz inks from Altenew, underneath the image I used Scattered Straw Distress Ink. I trimmed off 1/4″ on each side and mounted it with foam tape onto a card base I created from Ripe Raspberry cardstock from My Favorite Things.
I added black glaze to the eyes for some shine and Glossy Accents to the lightbulbs, before stamping and white heat embossing a sentiment from the Holiday Messages stamp set from Mama Elephant onto a scrap piece of pink cardstock. I cut the sentiment down to a strip, added a few more layers behind it and added it to my card, before finishing off with a few gold jewels from the Fesitivities mix from Little Things from Lucy’s Cards.
The Glaze, Glossy Accents, sub sentiment and gems all work together to add interest to what is otherwise a very simple card.
The coloring is pretty simple too 🙂
I stamped three of the little penguins using Extreme Black ink from My Favorite Things, colored them all in using my Copics, then restamped using Obsidian ink from Altenew, which is a pigment ink that stamps extra crisp and extra dark to bring the details of the linework back in.
Onto a separate piece of cardstock, I stamped a sentiment from the Mini messages stamp set from Mama Elephant using Hunter Green ink from Altenew.
Using the Circle Frames die from Avery Elle, I die cut the openings from Evergreen cardstock from Concord & 9th. I also die cut a few panels from white cardstock to layer behind the green, so my penguins would be recessed a little bit.
Using the Snowflake Confetti Fancy die from Hero Arts, I die cut a bunch of snowflakes from white cardstock (Stamper’s Select White from Papertrey Ink, which I also used for my card base) that I adhered around my circle openings to draw the eyes in toward those cute penguins and the sentiment. Easy peasy card, right?
Quick and easy peasy to color too.
Papirmølla 