Hi, crafty friends. Today I’m sharing with you a fairly simple birthday card featuring this cute puppy from the Spring Farm digi release from Lili of the Valley. This guy’s from the puppy set.
I colored him in very simply with just a few Copics, hinted at a sky behind him and grass below him using some very soft colors, trimmed my panel down and put it aside while I worked on the rest of my card.
Using Spring Moss cardstock from Papertrey Ink and the By the Numbers impression plate, also from PTI, I created a soft, yet textured background that I adhered to my top fold A2 card base created from Stamper’s Select White cardstock from Papertrey Ink. I love their white cardstock, it’s the whitest I’ve found, and it’s thick and wonderful to work with.
I glued a strip of silver glitter cardstock above and below my little puppy, before mounting it on foam tape on the top half of the card.
I die cut Gratulerer using the Gratulerer 6 die from Papirdesign three times: two from white cardstock, once from the silver glitter cardstock I’d already used. I stacked these for a little bit of dimension. I stamped a sentiment from the A06 stamp set from Norsk Stempelblad AS onto a piece of Pale Peony cardstock from Papertrey Ink using VersaMark ink, then heat embossing using clear embossing powder from Ranger. I added two more layers of pink cardstock behind it so it’d be flush with the die cut word above it.
To finish the card I added a few Sparkling Clear sequins from Pretty Pink Posh. These might be my favorite sequins, and I’m almost out of them, so I’m desperately searching for new ones. They seem to always be sold out.
Very soft and simple color palette used for this card.
I colored the scene in using my Copics, before using Iceberg ink from Altenew with the Slimline Cloud Edges stencil from My Favorite Things to create soft clouds in the background. I then sacrificed one of my stamp storage pockets from Avery Elle, using about half of it for this card to create the pocket for the colored panel to slip into. I know there are full shaker covers on the market, but I don’t have any, and the storage pocket was easy enough to alter.
I filled my shaker pocket with sequins and gems from the Candy Corn mix from Little Things from Lucy’s Cards. This is a great Halloween mix with clear, yellow and orange sequins, as well as some little gems and even acetate ghosts. I loooove the ghosts, but of course I removed them from the part of the mix I used for this birthday card.
I die cut the word Gratulerer twice from white cardstock and once from Pure Poppy cardstock from Papertrey Ink using the Gratulerer 8 die from Papirdesign, stacked them and used liquid glue to add the die cut to the front of the window.
I stamped a sub sentiment from the Go’klem stamp set from Norsk Stempelblad AS onto a separate piece of Pure Poppy cardstock using VersaMark. I heat embossed it using super fine detail embossing powder from Ranger in white, cut the sub sentiment down to a strip and added a couple of additional cardstock layers behind it, before adhering it to the front of the shaker using score tape.
Simple, but fun color palette for this one.
I printed the dragon on a piece of X-Press It blending card and colored him with my Copics, before using the largest die in the A2 Stitched Rectangles STAX 1 die set from My Favorite Things. I covered my card base with a 4 1/4 x 5 1/2″ piece of patterned paper from Kaisercraft (Charmed from the Key to my Heart collection) to match the green. I cut the panel with the dragon at funky angles at the top and left side to create a convex quadrilateral that I mounted on foam tape in the top left corner of the card.
Using a scrap of patterned paper from the Fremtidsdrømmer collection from Papirdesign, I die cut Gratulerer using the Gratulerer med dagen 3 die set, also from Papirdesign. I die cut an additional 3 layers of white cardstock to glue behind it, but decided that even that wasn’t enough dimension, so I cut tiny slivers of clear foam tape from Rabbit Hole Designs to add to the back of the letters. That did the trick, and it looks like the die cut is floating. I stamped a sub sentiment from the A06 stamp set from Norsk Stempelblad AS onto another piece of the same patterned paper using Jalapeño Popper ink from My Favorite Things, cut it down to a strip, added a couple of white cardstock strips behind it and more of the clear foam tape to make it float, before finishing off the card with a few enamel dots from the Pocketful of Sunshine pack from Altenew.
Fairly simple color palette, but I went through too many teal colors before I decided on the right one for the straws and the sprinkles.
I actually created two cards this time. No Copic coloring on these, which is rare for me. I bought the Wreaths and Mulled Wine stamp set from Ciao Bella last year, but didn’t have time to use it. Get Cracking to the rescue. I took one of the wreaths in the stamp set, stamped it in VersaMark ink onto watercolor paper (I used Fabriano Artistico Extra White 140 lb hot pressed paper for this) and created two similar, yet different cards.
For this blue one I used Iridescent Sparkle embossing powder from JudiKins for my heat embossing. I used Prussian Blue paint from my Mijello Mission Gold watercolor set and watered it down quite a bit to get the light blue I was after. I used a 3/4″ flat brush across the surface, and the heat embossing resisted the watercolor I put on top. I love the edges of watercolor, so I just walked away and let this air dry, I didn’t want to mess with it.
Using a more concentrated paint of the the same color, I did a flat wash on a scrap piece of watercolor paper that was big enough for me to die cut. I used the Merry Script die from Mama Elephant and die cut three layers of white and one layer from my painted blue piece and stacked them for dimension. I also white heat embossed part of a sentiment from the Itty Bitty Holiday stamp set from My Favorite Things and nestled that in below the merry using some clear foam tape.
I could fiddle with placement of embellishments all day long. Color, size, I wanted everything to be just right, and wound up using a combination of the Igloo mix from Little Things from Lucy’s Cards (pearls and iridescent sparkle sequins), the Crystal Collection – Glass mix, also from Little Things from Lucy’s Cards (clear jewels), and a few blue diamonds from Kort & Godt to fill in the rest.
I used a die from Waffle Flower to create a rectangle from the watercolored piece and mounted in on foam tape on a card base I created from Spring Rain cardstock from Papertrey Ink. It’s no secret that I love blue for Christmas cards, and I thought this soft background with the wreath and the embellishments was a nice combo.
For my second card I used the same wreath stamp that I stamped in VersaMark ink. This time I embossed it in silver, painted the background with Van Dyke Green (also watered down quite a bit) and flipped the panel upside down to have the snowflake in the bottom right “corner” of the wreath instead of the top left.
I used the same Waffle Flower die to create my rectangle from the watercolor piece and was a little unsure of what to do for a card base. I didn’t have any green cardstocks that matched my watercoloring, and I didn’t feel like pulling my paints back out to create a green wash that I could use (although that would have been pretty). I rummaged through my silver cardstocks, but none of them matched the silver heat embossing very well, so I wound up creating my own using the same silver embossing powder that I used for the wreath. I squished my VersaMark pad onto the edges of a 4 1/4 x 5 1/2″ piece of white cardstock, sprinkled on the embossing powder and repeated the process until the embossing was even and covered everything. I adhered my embossed panel onto a white top fold card base and mounted my watercolor cardstock on top using foam tape.
Using the Hjerte 3 die set from Papirdesign, I die cut the words God jul three times and stacked them for a dimensional look. I made sure to cut the top layer from the watercolor paper I’d already used so that the whites would match. I adhered my die cut words to the center of the wreath using liquid glue.
To finish off the card I added Kort & Godt diamonds in three different sizes in clusters around the wreath. They act as little berries and add a little bit of sparkle and shine.
I made quite a few green Christmas cards last year. It’s a color that’s growing on me, and this Van Dyke Green from Mijello is the most perfect green ever.
I had so much fun creating these cards. They’re very different from what I usually create, that might be part of the reason why. The simplicity of this design makes it easy to mass produce, too, if that’s your jam. Break out your embossing powders, different colors of paint and go to town.
Isn’t this image the cutest? The koala with the bunny ears painting the egg with the little bunny watching, it’s sooo sweet. I colored this image using a lot more colors than I normally would, but they’re colors that scream spring to me, so I’m all for it, I definitely long for warmer days.
I put a strip of pink patterned paper from My Favorite Things above and below the image, and added a few more patterned paper pieces (from Lawn Fawn and My Favorite Things) angled behind my colored piece, before die cutting all of them using the A2 Stitched Rectangles STAX 1 die set from My Favorite Things to create that faux stitch look that I love to add to my cards. I used the same die to die cut from yellow patterned paper from Lawn Fawn, adhered that to my card base, then mounted my colored piece on top using foam tape.
Onto a piece of vellum, I stamped a sentiment from an Easter stamp set from Papirdesign (PD18390 Påske) using VersaFine Onyx Black ink and clear heat embossed it, before die cutting it using one of the dies in the Fishtail Flag Frames die set from My Favorite Things.
I tied a bow around my sentiment banner using twine from Whisker Graphics in the color Lemon, and then I finished off the card with a few yellow enamel dots from the Pocketful of Sunshine enamel dot collection from Altenew.
Lots of colors for this one.
I actually made this card for my dad, whose birthday was last week. He loves his cakes and desserts, and has a stationary bike that he works on on almost daily (while watching police car chases on YouTube; no joke), and I thought this image would be perfect for him, with the little bear on his bike and the cupcake trailing behind. I colored the image with my Copics and used the Stitched Mini Slimline STAX die set from My Favorite Things to turn it into a panel that would fit nicely on a mini slimline card. I then die cut the letters to spell HURRA three times from Jalapeño Popper cardstock from My Favorite Things and stacked them for a dimensional look, before deciding that the green was too dark. I didn’t want to start over, so I using the same dies (the Connected die set from My Favorite Things), I cut an additional layer from Parsley cardstock from Concord & 9th and glued that on top of the dark green. I like the lighter green better.
I adhered my panel to a card base I created from Blueberry cardstock from My Favorite Things. I added Glossy Accents to the hearts in the image, stamped a sentiment from the A06 stamp set from Norsk Stempelblad AS using Jalapeño Popper ink from My Favorite Things and added a few more strips of cardstock behind it for dimension. I finished off the card with a couple of enamel dots from Papirdesign.
I probably used way more colors than I really needed for this card. Three colors for that cherry is kind of ridiculous, it’s not that big, but that’s kind of what I do – I really love my Copics.
I printed the image near the bottom left corner of a panel of X-Press It blending card, before coloring it with Copics and using the largest die in the A2 Double Stitched Rectangle STAX die set from My Favorite Things to create a finished look with the nice faux stitching details that I love to add to my cards. I adhered it to a cardbase I created from Jalapeño Popper cardstock, also from MFT, and I had my base ready for some play with scraps.
I love creating these clusters of die cut scraps on my cards, and I have stamp storage pockets with little die cut patterned paper scraps sorted by color. That way I can rummage through these when I create my cards instead of having to find lots of patterned paper to match my card, then die cut it. It usually takes several different patterned papers of one color to create the dynamic look I want for my cards, but for this one, I actually kept it simple with one yellow (P13), one white and gray (Sunny Studio) and only two green ones (Basic Grey and Karen Foster Design). They’re all different shapes, which still keeps it interesting. Some are glued directly to the card, some with foam tape for a little bit of dimension. Using VersaMark ink, I stamped a sentiment from the Mini Messages stamp set from Mama Elephant onto one of these die cut pieces (it happened to be a tag) and heat embossed it using Super Fine Detail embossing powder from Ranger. I used part of a mini paper doily from Doodlebug Design behind my main cluster, and added a few enamel dots (green from Papirdesign, yellow from Altenew) to embellish.
Lots of green for this color palette.
These snowmen from the 
I have lots of layers on these, and used a whole bunch of Christmas scraps from old collections by Pion Design, as well as some sentiment stamps and other stamps from Inkido and Norsk Stempelblad AS.
More scraps on the back. I love this way of creating, and I hope to do more of it this year!
This 
I used 3 different collections of patterned paper from Maja Design for this card. One of the benefits of using their papers is that their collections usually match pretty well. Vintage Basics Summer, Vintage Baby and Sofiero are the collections I used for this card, and they all match. I used older dies from Lifestyle Crafts, Cottage Cutz, Scrapmagasinet, Marianne Design and Spellbinders, as well as flowers from Wild Orchid Crafts and Papirdesign.
The insides of the card have a very similar layout, and so does the back. Onto a white circular panel, I stamped a christening stamp from North Star Design using Soft Granite ink from Hero Arts.
The card was too thick to fit inside a regular envelope, so I created a box envelope using a punch board from We R Memory Keepers. Onto a diecut eyelet circle I stamped a Norsk Stempelblad AS sentiment and adhered it to the box envelope.
This image is so quick to color and doesn’t require a ton of markers. Easy peasy!
I colored the gingerbread cookies with my Copics and used a circle die to turn it into a circle. I die cut another circle from patterned paper from Papirdesign and used a die from the Glassic Snow Globe die set from My Favorite Things to cut a window from the same piece. I stamped and white heat embossed a sentiment from Norsk Stempelblad AS below the window and added a shaker pouch from My Favorite Things that I filled with the Icicle Sequin mix from Hero Arts.
I die cut another circle from the same patterned paper that I used on the front and white heat embossed a to/from stamp from Norsk Stempelblad AS in the center. After adhering all the pieces together, I cut a hole at the top, reinforcing it with an eyelet before pulling string through. This shaker gift tag can definitely be used as an ornament too, and I’m hoping that’s what will happen.
Simple image and simple colors for this one.
Papirmølla 