Hi, crafty friends. I have a pink Christmas card to share today, made for the Kort & Godt galleri blog.
I started by ink blending trees in pink onto white cardstock. I used the Wintry Forest stencil set from Pinkfresh Studio along with Rose Quartz, Puffy Heart and Purple Wine inks from Altenew. I then stamped a sentiment in the M-428 stamp set from Kort & Godt and heat embossed in white. The heat embossing doesn’t really show up too well in my photos where the trees in the background are pale, but it’s more visible in real life. And if you want more contrast, you could start the blending with a darker color.
I used a die in the Die 178 set to create the faux stitching on the sides of my ink blended piece. The dies in this set are banner dies, but I did partial die cutting and only used the top half of the die. I added a couple of layers of white cardstock behind it for a little bit of dimension and adhered it to a top fold landscape card base I created from Stamper’s Select White cardstock from Papertrey Ink, which is the cardstock I’ve used throughout.
I die cut a sled (Die 321 from Kort & Godt) five times from white cardstock. I stacked them for strength and dimension and adhered my sled to the bottom of my panel, tucking a felt snowflake (ST105) behind it. I added another felt snowflake (ST103) in the top right.
The pink is very unexpected – at least for me. I never thought I’d ink blend pink winter trees, but this was fun! You could easily create this card in lots of other colors too, I wonder what it would look like in blue…
Kort & Godt products used:
Die 178 – Vimpler med søm
Die 321 – Kjelke med skygge
M-428
ST103
ST105
I colored my emu and koala with Copics, and fussy cut the image leaving a white trim. Cutting around that string of lights was tricky, but worth it.
Onto a piece of white cardstock, I stamped the Christmas Lights Bold Prints stamp from Hero Arts using VersaMark ink, and poured on Iridescent Sparkle embossing powder from Judikins, which I then heat embossed. It adds a sparkly, but subtle shine to the background and I love that the lights are just like the colored lights on the emu.
I cut off a strip of the panel on each side and die cut a star in the top center using the Stars Five die set from Spellbinders. I mounted the panel on foam tape and added it to a card base I’d covered with the 
I mounted the emu in the star opening, making sure to adhere the delicate lights directly to the white panel, while the emu itself is backed with foam tape. I stamped an white heat embossed a sentiment from the Christmas Wishes stamp set from My Favorite Things onto a scrap piece of my gum leaves paper, before using the coordinating die to cut it out. I backed it with four white die cuts and adhered it underneath the emu’s feet and dangling lights, before finishing off with sequins and star confetti from the Starry Night mix from Little Things from Lucy’s Cards.
You can see a little more of the sparkle in this photo.
The emu and the koala are very muted, so I chose bright colors for the lights.
I had a plan for this one even before I started coloring. Things changed as I was creating, but I still love the end result. I colored the little girl and fussy cut her, leaving a thin white trim around the hat and no trim at all around her mittens. I used The Stitched Snowflake Frame die from Lawn Fawn to create my large snowflake frame. I die cut four from white cardstock that I stacked for dimension and one from Soft Stone cardstock from Papertrey Ink that I adhered behind the white ones, you can see the gray peeking out from the points on the snowflake. The die also cuts a circle inside the frame. It has the same faux stitching as the snowflake, but I wanted a plain circle for this and used a circle die to cut a circle that was slightly larger than the frame opening. Inside the circle, I sprinkled on chunky white embossing enamel from Stampendous and melted the granules from the back for a snowy look. I put foam tape on the back of the girl and added her to the opening in the frame.
Using the Stitched Snowflake Backdrop die from Lawn Fawn, I created some texture to a plain white panel. The die actually cuts a panel that covers an A2 card, but I wanted a bit of a border on mine and pulled out the A2 Stitched Rectangle STAX 2 die set from My Favorite Things to get it a little bit smaller. I adhered it to a panel of Cornflower cardstock from My Favorite Things, which I then adhered to a top fold card base I created from Stamper’s Select White cardstock from Papertrey Ink.
I adhered the snowflake frame at the top center of the card and created a stacked die cut merry using the Merry Script die from Mama Elephant. There are four white layers topped with one in Soft Stone. I stamped and white heat embossed a sentiment from the Holiday messages stamp set from Mama Elephant onto a scrap of the blue card I used previously. I cut it down to a strip and added four small cardstock strips behind it for dimension, before I nestled it in with the die cut and finished off with a couple of pearls from the Glossy Porcelain mix from Little Things from Lucy’s Cards.
There’s quite a bit of dimension on this card. I love dimension!!
I tried to limit the amount of marker colors for this one. Did I succeed? Up to you 🙂
I chose four of the snowmen in the set and scaled them to fit inside the windows on this Globies Grid Cover die from Mama Elephant. I colored them with Copics and fussy cut them leaving a thin white border.
I die cut the cover die from Stamper’s Select White cardstock from Papertrey Ink, added acetate to the back and adhered my snowmen to the back of the acetate in a few of the windows. Onto a panel of Sno Cone cardstock from My Favorite Things, I did some very subtle ink blending at the bottom of each row of snowglobes, using Sno Cone ink, also from My Favorite Things. The ink blending adds a little gradient to each of the snowglobes. I stamped a sentiment from the Julehilsen stamp set from Norsk Stempelblad AS using Caribbean Sea ink from My Favorite Things.
I flipped the front over, added foam tape to the back of my windows and sealed the globe with the sentiment shut so no shaker bits would be in that particular window. I added a sprinkling of Distress Mica Flakes to each of the remaining 11 windows and carefully placed my ink stamped and ink blended panel onto the exposed adhesive to close my shaker wells.
I adhered my front to a top fold card base I created from Sno Cone cardstock from My Favorite Things. To finish the card, I die cut the bases for the snow globes from white cardstock and added a little bit of subtle shading on the edges with a T0 Copic marker, as well as the colorless blender.
These snowmen are super tiny, it’s a miracle I used so many colors. I may have gotten carried away with the red in particular. Five colors for these tiny areas is probably way too many, but there you go.
I mounted the snowman on foam tape for dimension, he fits perfectly next to the sentiment. To finish the card I added a few sequins from the Starry Night mix from Little Things from Lucy’s Cards.
Even though the background is adhered directly to the card base, I love all the dimension in the other elements. And here’s a little secret: I actually like the pops of red. Just don’t tell anyone 😉
This week is Designer Week at Lili of the Valley! This means you can save 20% on any item on 
For this card I paired 
This is why! This image, taken from a TV advent calendar, is of the fictional character Skomaker Jens Petrus Andersen. He was the protagonist in this advent calendar and he lived (and had his shoe repair business) in this green house. If you’ve grown up in Norway after the ’70s (but before 2010), you undoubtedly know this character and this very green house. I get nostalgic just looking at the photo.
Back to the card. Once my coloring was done, I added my panel to a card base I created from Cornflower cardstock from My Favorite Things. I used the Stitched Happy Birthday rectangle die from Memory Box to die cut the word happy. The die cuts a rectangle with the words happy birthday inside, but I wanted the word happy for my card and cut it away from the rest. I stacked a few for strength and dimension and adhered it to the roof of the train station, adding a white heat embossed sub sentiment from the 
Lots of Copics for this one.
I colored up the reindeer with my Copics and fussy cut him leaving a white trim around the edges. I added Glossy Accents to his nose for shine and put him aside while I worked on the rest of my card.
I used the Snowflake Confetti Fancy die from Hero Arts to make an impression into a white piece of cardstock. By dry embossing with the die, I add a bit of interest to the background without it being distracting.
I used partial die cutting with the Stitched Rectangle Scallop Edge Frames die set from My Favorite Things to create my scalloped borders on either side of the dry embossed white cardstock. I used patterned paper from Maja Design for this. The design is called Ornaments and comes from the Happy Christmas collection from 2021. I don’t use a lot of patterned paper on my cards, but I really like this green pattern with some sprigs, leaves and hearts in a darker green, along with some white dots scattered around like snow. The patterned paper from Maja Design has always been my favorite. It’s double sided and very thick. It’s so thick you can even use it for a card base.
I used the Snowflakes and Ornament die set from Hero Arts to create the ornament for my reindeer to sit in. I die cut the ornament die itself from the same patterned paper that I used for my scalloped borders. I then temporarily taped the two dies in the set together, so I could create an ornament with snowflakes. I cut a few from white cardstock and one from silver glitter cardstock from Kort & Godt, stacking them for dimension. I tied a bow to the top of the ornament using May Arts natural twine and added a few pearls from the Glossy Porcelain mix from Little Things from Lucy’s Cards on top of the knot for additional shine.
I added Rudolph with his shiny nose to the center of my ornament. I also stamped a sentiment from the Itty Bitty Holiday stamp set from My Favorite Things using Shadow Creek ink from Altenew onto a scrap piece of the patterned paper I’ve used throughout. I added a few strips of white cardstock behind it for dimension and adhered it below the ornament, centered on my white, dry embossed piece.
This card wound up very simple looking, but it’s still kind of technique heavy. Partial die cutting, dry embossing with a die and layered die cuts. All the layers make it a very thick card, and it’s not the most mail friendly card I’ve ever made – I love dimension!
For an image this simple, I sure used a lot of colors!!
The koala sitting on the pile of presents comes with a matching sweet sentiment (pun intended), but I chose not to use the sentiment for this card and decided to erase it from the image in Photoshop before printing.
I went with a fairly traditional (at least to me) color combo. Light blue is one of very few colors I feel works well with red, and I even colored the stars blue to avoid adding more colors to this than necessary in order to keep the design clean. I die cut my panel using the largest die in the Watercolor Rectangle STAX die set from My Favorite Things, added foam tape to the back and adhered it to a top fold card base I created from Periwinkle cardstock from Hero Arts.
Onto a scrap piece of Periwinkle cardstock, I stamped and white heat embossed a sentiment from the Christmas Wishes stamp set from My Favorite Things, before using the coordinating die to cut it out. I added two more die cuts behind it for dimension and adhered it to my card, before finishing off with sequins and star confetti from the Starry Night mix from Little Things from Lucy’s Cards.
The popped up panel, and the dimension to the sentiment add a little bit of extra interest to an otherwise fairly clean and simple card. I wanted the image to shine, which is why I kept the sentiment a fairly light color.
I feel like I restrained myself when coloring. I only used four colors for the red, as opposed to my usual six. I kind of went overboard with the green, though. Those holly leaves really didn’t need three colors, they’re tiny.
I started with an A2 side fold card base, used the Watercolor Wash Free Form stencil from My Favorite Things and ink blended softly with Picked Raspberry, Spiced Marmalade and Squeezed Lemonade distress inks. I then layered the Basket weave stencil (also from MFT) on top and ink blended again using the same three colors, this time going in with a heavier hand.
I die cut the Ingen er som du die six times from white cardstock, once from black glitter cardstock and the shadow die once from 40 lb vellum from Bazzill. I usually use a heavyweight vellum, but for this, I wanted some of the ink blending to show through, so a thinner version was the better choice for this particular card.
I stacked three of the die cut words, then added the layer of vellum, then the last three white die cuts and finally the black glitter cardstock. It’s a very fine glitter and doesn’t really show up in my photos, sadly.
To finish off the card I added a sticker sentiment strip on top of the die cut and finished off with some black jewels.
I admit, I don’t make many Halloween cards. Halloween’s not really my thing. I think it might be the costumes that freak me out. I was scared of Santa as a kid (to be honest, Santa still creeps me out) and I never liked dressing up for carnival in kindergarten either. I don’t know what it is, I’m just not a fan. I am, however, a fan of these ghosts, they’re so adorable. In the stamp, the ghosts are holding a banner, but I wanted the ghosts alone, so I removed the banner, did a little bit of stamp surgery in Photoshop to complete their arms (since they’re holding the banner, you don’t see the entire arm on either of these ghosts). I created mirror images of each of the ghosts so I had four different ghosts to work with, and made a few copies of each.
I did very simple coloring of the ghosts, I just wanted a hint of color and actually only used four markers. I cut down my panel, added foam tape to the back and adhered it to a white card base I’d covered with Caribbean Sea cardstock from My Favorite Things.
I die cut the letters to spell happy using an alphabet die set from Papirdesign. I die cut each of the letters three times from white cardstock and once from Gravel Gray cardstock from My Favorite Things that I adhered on top of the three white ones for a stacked, dimensional look.
I white heat embossed a sub sentiment from the Itty Bitty Boos stamp set from My Favorite Things onto a scrap piece of Caribbean Sea cardstock that I cut down to a small strip. I adhered a couple of additional layers of cardstock behind it before I adhered it to my die cut letters. I added a few pink sequins from the Heaven Sent mix from Little Things from Lucy’s Cards, and my card was complete.
As I mentioned, I only used four markers for the coloring of these ghosts.
Papirmølla 